For sale is a Transferable SEI (Smith) MK14 Mod 0 EBR machine gun. This rifle started out as a standard M14 and was later sent to SEI for the MK14 conversion. Included is a serial number matched Windtalker Suppressor, leupold mk4 3.5-10, and 6 mags. Rifle and can are currently on form 4 pending form 3 approval. The rifle and can are unfired outside of any factory testing.

Price: $35,000 Shipped $32,000 Shipped

Hi friend
selling scope for $1450 and mount ship together
very good condition , glass are very clear no marks or scratch
no boxes misplace, will ship free
Accept payment:
Venmo, Zelle,Pay Pay pal
310-357-6026
thanks
No trade

I have for sale a Lawton machine 700 clone, short action 308 bolt face.

In good condition with some imperfections as can be seen in the photos.
Comes with WTO recoil lug for quick barrel changes.
Also have a print for ordering barrels from Keystone Accuracy. John offers quick turn arounds on his prefits.
I am not sure of the round count as I am the second owner but still shoots exceptionally well.
AICS Bottom metal included.

I will include the 18 inch 6.5 creedmoor barrel to sweeten the deal round count is about 1200 but still shooting well. It was an MTU contour chambered and shortened to 18 inches by keystone accuracy.
SHIPS TO FFL ONLY.

Asking $650 OBO.

I’ve got a Barrled action from MPA that I need to move. Comes with an APA fat bastard. Comes with trigger also.

Has 398 rounds on the barrel.

$1550 shipped to your ffl.

I've been having excellent loads with 458 socom..
Recieved some new bullets ,some Nosler balistic silver tip 300 grain and some plated 350 grain FMJ from Everglades ammo..usually I shool check brass and good,clean no bad signs..I have shot the new ones silver and fmj and the brass has bad powder burns on the sides bout half way down brass,thought might be pressure so changed loads up /down ,I crimped a couple vs non crimped but with both still burnt.. No other loads have this issue.
Has anyone else been blessed with this problem??

One blackhole of entertainment after another

I read the thread on the German knife attack and then read a suggested jewel by @TheGerman about parade follies, then I delve into another suggestion by @supercorndogs and then about 5 others and I still haven't finished the unread post I came here to see.

Custom Foam Insert for Garmin Xero C1 Pro Chronograph & Kestrel 5700 Ballistics Weather Meter

Designed for Apache 550 Weatherproof Clear Case from Harbor Freight

Safely store and protect the Garmin, Tripod, and Kestrel with lanyard while not in use.

Made from Polyethylene (PE) Foam

$20 Shipped PayPal USPS CONUS

Package will be shipped day after order was receive (unless Saturday)

*Does not include Garmin Xero C1 Pro Chronograph, Kestrel 5700 Ballistics Weather Meter, Apache 550 Case, or Accessories

I’m guessing everyone knows, however, if not a fantastic deal is happening on complete rifles right now.

https://www.aeroprecisionusa.com/bolt-action/rifles

Coupon code "SAVESOLUS" brings the standard rifle down to $1065 and the competition is $1400

6.5 cm
140 Berger VLD Target
All loaded at -.020 from Jam
42.1 - 43.9 grains of 6.5 StaBall

Help me choose the accuracy node by looking at these 100 yd groups.
4 shots each in a round robin fashion. 45 secs between shots, 2 mins between strings. No wind, maybe one bad trigger pull.

Thanks in advance
J

I’ve got this Masterpiece Arms Matrix in 6mm GT I need to get rid of. All specs will be listed below. The current barrel has around 2,200 rounds on it and I placed 15th in the last competitionI shot with it(Alabama Precision June Shooters Challenge and it has not been fired since). I’d assume the current barrel has another 800 rounds or so left on it. I do have a brand new barrel with it that has never been mounted. I am willing to split some of this up to get it gone.

MPA Matrix
Sold

Curtis Valor Short Action
Current Barrel is an MPA barrel
New barrel Bartlein Barrel 7.5 twist 26” chambered by A-Team Precision
Trigger Tech diamond
$2,300

MDT CkyePod PRS Short
Sold

Leupold Mark 5 7-35 PR2 reticle w/ DI precision wind dial
Area 419 Match rings 35mm Medium
Sold

Brandt Built send it level mount
MDT send it level
Sold

I’m located in Jasper, Alabama and would be willing to drive to meet to help with transaction.
I do have reloading supplies that can be discussed if needed for an easy swap to 6 GT.

Anyone using center x with a vudoo 360 having issues of unfired rounds not extracting?

~1400 rounds through the barrel. No issues before the last few matches. No borescope, I’d drive myself nuts with it but I’m VERY diligent with cleaning the chamber/letting it soak with boretech carbon remover.

Anyone had it develop? Firing the round it extracts. Only center x fed. No other ammo.

Edit to add: I hadn’t been timing out with a round in the chamber previously. Shooting on a range (non matches) I never found myself trying to extract an u fired round.

Vudoo said it may be the result of a dull reamer when finishing the barrel. Offered to touch it up and reassured it’s a quick fix. I’ve been happy with the way it’s shooting so am going to hold off for now where I’m doing the NRL22 matches every month.

UPDATE 8/30/24 with some borescope video and a pic:
Video shows entering the chamber up to the lands and circled around. Looks like a small carbon ring. Not sure about all the other cracking / etc.

Login to view embedded media

Up for sale is my V4 auto trickler with FX-120i scale. Also has upgraded white panels and inner powder tray. Will also include area 419 master funnel kit.

Works perfect, just don’t shoot competitively anymore. I had this setup and with the new software update it worked amazing and was very fast and accurate. Software update was huge upgrade to the V4.

$old shipped

Looks like another knife attack happened in Germany. At an even called the “Festival of Diversity”. Bet the attackers names wasn’t Fritz or Hans.

Great condition. Only used on a .22. Comes with box , factory throw lever, optional sunshade. Two flaws-small scratch on tube, silver sharpie mark on diopter. Glass is perfect. $1500 shipped, paypal or venmo.

Starting our Labor Day Sale


Use code: LABORDAY

I'll be adding new stuff daily or around there
-most items are only 1 unit or limited quantities

Some items you guys might like:
1. Garmin Tactix 7 with pro ballistics
2. Arken Zulus
3. MDT Oryx Chassis' with matching ARCA rail

Looking to sell some barrels and stocks from my days at the Remington custom shop and Dakota Arms.

Barrels are all contoured blanks other than the AR barrel.

Stocks are mostly Remington 700, there are a couple model seven stocks on there too.

Open to offers or trades.

So I finally took the wife to the range, and showed her the 10ish guns I have built this year. She took it better than I would have thought. In fact, as we’re driving home from the range, she said, “Can we build me a rifle?”

Completely shocked, of course I said yes. I already had most of the parts in the cabinet. I told her she would have to pick out and order her own optic though, and that we would have to go to the store where I pick up most of the parts I forget to order so she could pick out what stock, grip, etc. she likes.

The kicker is, she wanted it purple. Immediately I thought of Aero’s anodized “purple” (which let’s be honest it’s fuchsia bordering on hot pink), and was already cringing. But she hated that as much as I did, so I went to O’Reilly’s, and bought a can of Chrysler Plum Crazy Purple engine paint. For my first rattle can job, it turned out better than I could have imagined.

But it’s a .223 Wylde (solely because I didn’t have one - I wish I had done 6 ARC or 6.5 Grendel now), 16” Faxon barrel, Aero stripped upper, Anderson stripped lower, Aero handguard, Geissele parts kits, Aero adjustable gas block and tube, Radian BCG and charging handle, Triggger Tech 3lb single stage trigger, full ambi controls (she’s right handed but shoots left eye dominant, I figured better safe than sorry), Geissele double spring and tube, H2 weight, Magpul’s MOE grip and Magpul’s version of the SOPMOD (I forget what it’s called). She had shot all my rifles, so she experienced my Strike Eagles, ACOG, Eotech 512 with G45 magnifier, etc., and chose the Arken Optic LPVO, the same optic I put on my 8.6BLk build. It shoots great. Even more so considering I had her do most of the build and only jumped in on stuff she had trouble with.

Picture below - please be gentle… In full disclosure, I wish I had painted the buffer tube and the dust cover as well, then get rid of the Lancer magwell, but she likes it as is.

I had to send my little rescue dog Koki over the camo bridge yesterday- he was 13.5 yrs old and 12 lbs of pure loyalty and joy. Because he was about 8.5 years old when we got him, I didn't change his name, just the spelling from the native Puerto Rican "Coqui". He was suffering from liver failure- too much rum before we rescued him? Don't know.

I'm gonna miss the little guy... To anyone who ever lost a pet- the best way to cope is to stomp a leftist?

To all the pets ever passed- an endless supply of treats and clean water!

This is Koki at about 8.5 YO, on Independence Day 2019:

Have you noticed a significant drop in reliability of the Usps? Strange tracking updates of a package out for delivery, then suddenly goiing to
Walla-Walla Wa. This photo was posted on reddit today. The mail people are screeching about the photo being taken.

Trijicon 3.25 Adj Red RMR Type 2 Comes with awsome plastic box and all paperwork 3.25dot No more then 20rnds under a G19 400.00 Venmo Zelle

Attached Images

XLR Envy Pro with C6 buttstock. Comes with the Pro PRS competition kit, bag rider, thumb shelf and a the XLR folder. Has camo cerekote with magpul green, vortex bronze and black. Only used the chassis in one one day PRS match. Going back to a traditional stock style for my PRS setup. $1300 shipped

I wonder how many others are out there that he got away with doing this to. I guess his story is going to be that it was an asset forfeiture and he forgot to do the paperwork and turn in the money.

What are you guys mainly using for elr matches like nightforce steel challenge krg elr light class ect....

I'm using a krg whiskey 3 gen 6 chassis but I'm trying to build another rifle and looking at other chassis and stocks. I like my chassis no issues but looking at something else

I've looked at
matrix pro 2
Xlr Envy pro c6
Manners t4a stock
F.A.S.T chassis
Mcmillian


I've just looked at them online no place for me to really go try or in person type of thing. But just looking at what others are running. Also of you guys have experience with those chassis or anything similar.

I now have a decent amount of cans and almost all are on the YHM phantom mount set up. They lock up well and if you know how to adjust the bottom spring loaded part on the brake they all lock up fully with zero movement, so not an issue there as some have had complaints about....

That said, at this point, I won't be swapping them around much. The plan is to not swap at all, so I'm trying to decide if I want to:

1 . Direct thread all or most(only concern here is carbon build up and getting them off for cleaning, my crown , ect)

2. Switch to a new mount and brake set up. (Pretty much gonna cost me $1.5-2k

3. Direct thread most AND switch mounts on some others where it makes sense.

4. Just get a few more phantom hub mounts and call it a day.

It looks like the Q stuff or Reardon with cherry bomb brake is ideal as I always shoot suppressed. I'm not concerned about having a good brake other than what it could do for me when the suppressor is on it.(ie take the abuse, help suppressor, ect)

Thanks