OK, so I’m taking my drag bag out of the gun room, and I step on something that feels like a Lego… of course it’s far fucking worse.

Anybody know what the hell this is?

For sale; Custom GA Precision rifle.
Badger 2008 short action currently chambered in 7/300 WSM, 24” Bartlien barrel, 8.7:1 twist for 180 Berger hybrids. Surefire 2 chamber brake, Trigger-Tech trigger, KRG Whiskey-3 folder chassis.
Schmidt-Bender PMII 5-25x56 Tremor 2 scope in Spuhr mount.
Includes 4 Accurate Mag 7 round WSM mags, 150 rounds of custom Copper Creek Berger 180 hybrids. 2900fps@4000ft MSL. Plus rough 240 +/- pieces of 7/300 WSM Brass. Tan Pelican case. *bipod and scope level not included. Not interested in trades or parting out. $5000 complete or $3000 for rifle with brass and case. $2500 for S-B scope and Spuhr mount.

22 Creedmoor

Bear Creek Arsenal Lower
Bear Creek Arsenal Side Charging Upper
Bear Creek Arsenal Handguard
Bear Creek Arsenal Bolt Carrier
CMC Flat Trigger
LuthAR MBA-1 Buttstock
X-Caliber 20” 1:7 Barrel with Deep Spiral Fluting, 5/8-24 with Thread Protector
Forster Full Length Sizing Die (Unopened Box)
Forster Ultra Micrometer Seater Die (Unopened Box)

$1200 Shipped to FFL in CONUS

Have 737R action on order need to get barrel. Thinking Bartlein or Proof (stainless) 26in, target/competition appropriate profile (MTU, Palma). It appears those are not in stock - any recommendations on best places to source them from / get on waiting list?

Thank you

Selling my L3 Cratos night vision, thermal scope. It was manufactured in April of 2021 and works perfectly. It has W-hot, B-hot, and outline. 1&2X zoom. Standalone, clip-on and handheld options. It has laser, and both auto and manual calibration. It is capable of capturing photos which can be downloaded via USB. It comes with the eye cover and a mount. It has a few surface scratches shown in the photos that do not affect it's operation. It also has my initials etched but they are hidden under the mount.
$7,900 insured shipping.
Thanks.

Looking for a good, solid case for four hand guns, possibly five, two are full size, two are compact and one is middle of the road size wise. I'm probably going to bring 3-4 mags each and possibly two suppressors if I can figure out the paperwork for that.

I see quite a few offerings on Amazon that look like they'll work and maybe I'm overthinking it but they all seem to have plastic eyelets for the locks instead of some sort of metal reinforcement ring. So easy to just cut through that portion of the case and take off the locks. I'll be flying and yes, I'll be using NON-TSA locks.

Any better offerings out there?

Remington 700 sps tactical, 223 Remington, magpul hunter stock, magpul dbm, 2 aics mags, custom bolt handle, factory trigger tuned, barrel was shortened to 16” and cut for over the barrel AEM5 suppressor adapter, adapter is otter creek labs flash hider, magpul FDE cerakote, Leupold scope rail, scope is Leupold mark 4 lr/t 3.5-10 in Leupold mark 4 rings. 1500 for rifle, 2700 for rifle and scope. 245 rounds through it.

Cleaning out the gun room, all prices are shipped.

Vortex strike eagle 5-25 in Leupold mark 4 mount: $600 $500
Vortex viper pst 5-25/vortex precision match rings: $750 $700
Remington 700 long action hs stock/atlasworx aics bottom metal: $75
Magpul PRS stock: $125
Magpul PRS gen 1: $125
Ballistic Advantage 20” AR10 match barrel .308, YHM gas block and gas tube, 25 rounds through it: $100
Stoner AR10 .308 barrel, 50 rounds through it, 18”: $75
Hawkins M5 DBM Long Action: $200

AI AE Mark 1. Original Lothar Walthar 11.25 308 barrel, 18" - 5/8x24 threads. 168, 169, and 175 all still doing fine. Got it from Mile High as a police trade-in. They will tell you nothing about history, so count is unk. Fully accessorized.

Scope is Sold. Base is staying. Photos of rifle-only added to reflect.

I would PREFER TO TRADE or partial. And face to face in North Texas would be even better. Sale price $2800, rifle and kit. If you have a serious offer, PM me, and I'll take additional photos. If it must ship, the pelican case needs to stay.

Things of interest:
-TT315
-Henny 4-16 (new turrets)

Looking to sell this ZCO and standardize my optics.
ZCO 5-27 15mil NLE turret with MPCT3X reticle
Spuhr 6602 with diving board
Scope chap in MCB

SOLD

Couple things for sale here:

Hornady 4DOF Kestrel. Comes with new TYR carry case. Like new and unused $360 shipped.

Armageddon Gear Squishy Rear Bag. $SOLD shipped.

Armageddon Gear shooting Mat. Like new and unused $SOLD shipped.

This man should be Pope. He certainly gets it and states it exceptionally well. I encourage all to read it.

in this election you must choose between two radically opposed ways of conceiving the government of your Nation: you are called to choose between democracy and dictatorship, between freedom and slavery.

Click to expand...

On one side we have candidate Donald J. Trump, who, despite serious problems in his positions – especially in the matter of abortion and assisted procreation – has as his objective the common good and the protection of the fundamental freedoms of citizens. In Donald Trump’s America, every Catholic can practice their Faith and educate their children in it without interference from the State.

Click to expand...

On the other side we have a candidate and a party that promotes everything that directly opposes the Faith and Morals of the Catholic Church. In Kamala Harris’ America, Catholics – but also Protestants – are considered fundamentalists to be marginalized and eliminated, and their children are considered the property of the State, which arrogates to itself the right to lead them astray from an early age in both body and soul.

Click to expand...

Look at your country! Your cities have become dumps filled with derelicts and criminals, drug dealers and addicts, prostitutes and robbers. Your schools are dens of indoctrination and corruption from kindergarten onwards. In your courts, criminals are acquitted, and innocents are imprisoned: new ideological crimes are prosecuted, while illegality is tolerated and encouraged.

Click to expand...

https://theconservativetreehouse.co...tter-to-catholics-in-advance-of-election-day/

Picked up some extra items that I dont need. Only trades interests are listed at the end. Will upload pics later this evening

Impact Precision 223 barrel + bolt + 3 mdt mags (2 poly, 1 metal)
22" Benchmark comp contour barrel
1-7 twist. Throated for heavies
threaded 5/8"-24 and clearance for an ATS tuner in the front
less than 200 rds
Area 419 Hellfire 6mm/223 hellfire
Impact 90 degree 223 bolt - only run for rounds through this barrel.
There is some dumb laser etch on the barrel. will include sticker to cover it.
Picked this up from Brady Lamm, but didnt pay attention to contour and it wont fit in my LRH. I also picked up a another rifle that ill use as my trainer. asking $750 for 223 package.
Also available to buyer is about 100rds of different 223 match rds for .60/rd + shipping

Wiser Precision Arca-adapter Pro - with rail - $55 shipped
NF 34mm 6 screw 1.125" rings - $135 shipped
HLR Lug for Origin action - $33 shipped
trades:
55"+ soft rifle case
bushnell LRHS2/LRHSi

Surely someone here has one, has had one, or knows someone who does/did.

What are the in's and out's of having one?

Are you required to keep meticulous records like a regular FFL? (A good idea anyway, but still)

Are you subject to bullshit random inspections any time someone at ATF gets bored?

Any caveats that aren't generally known/discussed?

It's a $30 application and I have a bit of a fetish for old military rifles... So I was curious.

Mike

Ok... call me a homo! Yes I'm picking on myself! I should be able to figure this out but for whatever reason it's kicking my butt!

So, I shot the M40A1 today and wanted to fine tune the zero a little more as well as set the focus etc... after shooting it at my 117-yard target I then went to the steel plate at 430 yards. If I get the chance, I might be able to shoot the rifle in a vintage sniper rifle match in early Dec. out in MT. That match is shot at 300, 385 and 500 yards. So, I want to lock in the parallax/focus on the objective. Here is where it is at... but how do I lock it in without it moving on me? You can see the gap at the very front of the ring and behind the larger diameter ring.



This was my last group for getting a final zero on it at 117 yards. Yes... I was a homo on that high round. Probably too much time playing with all the adjustments and just blew it. More I think about it I didn’t blow it. I did bring the zero down on the scope with the allen wrench and locked it in. I needed about 1.5” down and tried to move it about 1 minute… I think I got it right! Only needed one windage adjustment after my bore sight job and first sighter…never touched the windage dial after that. So the scope is tracking and holding zero!



So happy with the 117 yard zero... I moved the elevation dial to 4 and initially moved the fine tune adjustment up 1 click also but knowing the 169smk have a higher bc than the old 173gr bullets and even more than 175smk... I decided to take the 1 click off the fine adjustment. On top of all that for the most part I've been having a tail wind mostly speed wise from 6-11mph. Glad I took that fine adjustment click off.


So, for 37 rounds down the barrel... I'm digging it! Average velocity is coming in at 2687fps. No need to run it any faster.

So, thoughts on locking in the objective ring without moving the whole set up please.

Night force ultra mount 1.54’’H 0moa dark earth
Night force dive board dark earth
Night force NX8 2.5-20x50 F1 moa dark earth
$1900 for everything shipped!

The FUCK have people in this world become?
If that’d been me and my baby, that bitch would’ve been picking up her teeth off the ground.
Login to view embedded media

Came on a hunting rifle I bought. Has been used in a McMillan /r700 clone.

Not sure of brand. Grayboe I am told. Seems to work fine. Looks used but no signs of abuse.

Switching to flush fit.

125 shipped as I don't know Much about it.

Hi, i am probably massively overthinking this but, since this is a pretty expensive rig, i want to set it up in the best way. I mounted the scope following a strict procedure (the crosshair is level to gravity and to the top ring bubble, everything is torqued down to specs). It was a long process and i wish i won't have to do it again.

Using the typical criss cross pattern method i torqued every top ring screw to 25 in/lbs with these hawkins light tactical 30 mm rings.

At the end of the process i was very satisfied because the system crosshair-bubble is perfectly leveled to gravity. I noticed that the gap between the front and rear rings is not perfectly even. I read somewhere that someone is even using feeler gauges to check fo uniformity in the gaps. Since of course having the exact identical gap is impossible, i want to understand if in my case the gap differences are acceptable or not.

I measured with a feeler gauge: rear left 0.9 mm (0.035 inches) gap, rear right 0.9 mm gap, front left 0.80 mm (0.031 inches) gap, front right 0.85 mm gap. So basically there is a max 0.1 mm (1/256 inches) difference between the rear and the front rings, while there is a max 0.05 mm (1/512 inches) difference between left and right.

i will post some pics. The gap is not easily visible in these pics i think but when looking in person i notice it.

what do you guys think?

6 dasher proof prefit for impact.
26 inches
5/8x24 thread
7.5 twist
Comp contour
375 shipped.
Brand new.
I ordered it directly from proof.

Hi Folks,

I am selling my nicely customized Ruger 10/22 rifle. The barrel is the Ruger heavy forged that originally came in Ruger wood stock. The bolt is a Kidd stainless matte and trigger is a Ruger BX, while the new stock is a Pro Mag Archangel. The Scope is a Hawke Optics 3X-12X x 50mm and the gun is supported on a Harris Bipod. This setup is an excellent shooting platform off the bench or field. I am including 2, 10 round magazines along with the original Ruger bolt and flip up scope shades. I put 400 rounds through the barrel during my ownership, but do not know the actual round count as I purchased it pre-owned. No box or accessories for the Hawke scope (the way I bought it). I will tell you this is an extremely accurate 10/22.

Sell the whole rig as pictured for $675. or will sell everything minus the scope for $525. FFL to FFL only. Payment is by USPS money orders, bank check, or personal check (must clear first). No Paypal, Zelle or Venmo. PM here for questions. No trades, please.

Bah ha hah ahh ahahh aa...

Supporting Hamas....

There have to be a ton of great memes in this story!

Sirhr

WTS a lightly used Springfield Prodigy 5". Bought it brand new at the start of the year, before I even shot it, had it upgraded with all the EGW parts and extras listed below. Everything was hand fitted by a reputable 1911 smith in my area. Gun is buttery smooth and runs great. I have shot it at two local matches, 600ish rounds down the tube.

Trying to keep it as a full package, but will sell without Optic upon request.

$1500 Pistol, Mags, Parts, Holster
$250 Holosun 507
$1700 Complete Package

Shipped to your FFL (PP, Zelle, Venmo)

The money from this is going to a 11.5"Geiselle Super Duty pistol. Open to trading if someone has one, also a Vortex Gen III 1-10.

Make ? Value ?