Beretta 686 Silver Pigeon 1 20 Ga - $2050 (shot 100 rounds through it) 28"

Beretta AL 391 Teknys 12 Ga Sporting - $SOLD- 30"

FN SC 1 12 Ga with green laminate stock - $1450

Prices are shipped to your dealer. Pictures soon

New die, followed the instructions included to set it up - twist in until it touches the raises ram and then another 1/8-1/4 turn.
Lubed the once fired brass inside and out, raises the ram but the brass has way too much resistance. Feels like it goes easy for the first quarter and then I practically have to hang on the ram handle to push it in. That's where I stopped. Also tried the same with new, unfired brass, same issue.

Alpha brass
6mm Dasher

I also tried removing the whole recapping unuty (that has the depriming pin and the expander ball) and run the brass just in the die body. Same issue, gets too much resistance at the same 1/4 way in.

New to this so it's likely that I'm not doing something right but I'm not sure what.

Thank you

I am considering starting a heavy equipment business where having a CDL would be beneficial.

Since our beloved Federal government has seen fit to stick their fucking nose into everything, now you need to take an approved course to even be able to test for your CDL.

What is the absolute easiest, quickest way to get a class A CDL?

Most companies want to tell you how professional and in depth their training is. IDGAF about that and just want to get the stupid stamp to make the feds happy so they fuck off and I can take my CDL test. I can already drive non synchromesh vehicles, and have driven stuff with air brakes before, long trailers, etc.

Driving the vehicle isn't the issue here, especially since 99% of my driving would be on rural roads.

Any of you know of the most down and dirty, cost effective, "approved" training course out there?

Thanks.

This popped up a few days ago and I realized it hasn't been shared here. L3i just came out with what might be the best deal on a aftermarket barrel for the CZ 457 (At least for NRL and PRS shooters). It is a 24 inch straight 1.180 profile barrel with a match chamber and target crown. They haven't officially said where the blank comes from, but based on the diameter there are only a few options- All of them being top tier barrel manufacturers.

The 1.180 barrel diameter is a huge deal for those looking for optimal balance on their CZ 457. Based on my calculations, the barrel should weigh around 7 lbs giving you an extra 3 lbs up front over a 20.5 inch MTR barrel. This means that almost any chassis or stock you fit this to will require little to no extra weight up front for balance.



They originally priced these at ~$550, but was told by @Thesepaperwings they were able to secure a better deal due to ordering the blanks in a larger batch with the barrels for their new Stinger Action. So the price right now is $329.00 + tax and $6 for shipping. I personally think the value is huge and already placed an order. They didn't say how long this pricing will be available, but it's definitely a good deal.

Obviously no testing data yet, but based on the quality of everything else I've seen/gotten from L3i, I'm confident it'll be great. I'll post results from ammo testing, balance, etc once it comes in.

Berger 105's @ $221.00/per 500 count plus shipping
Berger Hybrid 109's @ $248.00/per 500 count plus shipping
Call or text Alicia@ 785-643-1264

Well,

This is back up. I had pulled the original ad as I was going to keep it, but just got confirmation my 2011 build is finished and I want to recoup some funds....

Having said that, its still just as lightly used as before, only set up twice on the range to sight in a few rifles.... However, my dumba** had it riding in the back seat of my truck, and it rubbed against a metal ammo can, and scratched (removed finish) on the Ball Head (as pictured) so I am knocking off some $$.

I do want to sell this, but I'm not desperate, so please no low-ball offers. I'm pretty firm on price.

Comes with 55mm ball head with Area 419 QD Arcalock.

$700 shipped CONUS... Paypal FF or Venmo preferred.

Would like to sell a Zermatt TL3 with Proof SS comp contour 6cm 26" and has a mpa dn3 6.5mm muzzle brake. The action and barrel have around 400rds thru it. I also have roughly 300rds of lapua srp brass that can be sold with the barreled action.
BA with brake-$1550
BA with brake and brass-$1800

This HK MSG90A1 started out as a parts kit that was built on a HK SR9 rifle by TSC Machine. This is the closest you will ever get to a real MSG90 here in the USA, as the MSG90's were not imported for civilian use. This rifle is in New unfired condition since it was built. The MSG90A1 has a polygonal barrel that is weighted at the muzzle to aid harmonic stabilization of barrel whip for increased accuracy. It has a Anschutz style T-way on the forend specific to the MSG90 rifles allowing easy installation of a Harris bipod or whichever your favorite bipod may be. This is a dream rifle for a HK collector's. Don't let this one get away from your collection.

To purchase this gun, you must message me though the board here or contact me through our web site email:


[email protected]


We must talk via voice to make any arrangement. Do not wire or send any funds without calling the number you receive by contacting me through this site or via the above email. Pay close attention to that email address as scammers make emails that look similar. Our business is in Tulsa Oklahoma, I am in Tulsa Oklahoma, and our bank is a locally owned bank in Tulsa Oklahoma.

Price: Sold!

Commies gonna do what commies do, which is take away guns. Or at least try to.

Idiot states that we have to get automatic weapons banned. Semi-automatic rifles are far outweighed by shot guns and hand guns. And only gangsters are converting Glocks to full auto, illegally. So, yeah, those weapons are not allowed by the law.

But that does not matter. The intent is to take away your guns.

Take all of the gun deaths. I mean, from mass shooters, to lover quarrels, to gang bangers to suicides. All of it. Not a drop in the bucket compared to the millions killed by communism, which is what this idioto in the SG office wants.

I'm looking for a long action with a rem 700 footprint and controlled feed bolt that I can run a side mounted iron sight on that also accepts prefit barrels.

I know American rifle company makes one but they use the springfield ejector and as a result they cut a hole in the side of the receiver where I believe the sight mounting plate would sit.

Defiance Elite Action. New in the box, with 308 and 223 bolts. Action and both bolts are black nitrided. Right handed, Heavy tang, ruckus style bolt handle, AW cut, 20moa rail.
$1800 shipped to your ffl. insurance is on you if you want it.

Paypal f&f or add 3%

SR25 KAC ambi lower; dual ejector chrome bolt; smooth LMT carrier. URX4. Cartel Upper. 16” barrel with 3/4x24 threads. Comes with KAC MD. Surefire MD not available even though it is pictured. I’ll be putting the Kac FH back on.….. Gen2 IR FDE cerakote

I’m looking around for pricing and here is what I’m finding:
The upper from d Wilson is over $585 and they are sold out.
Barrel;gas block almost $1k.
URX4 Rail ~$450-500.
Muzzle Device-$200.
Complete BCG $1000+
Charging handle-$150
The lower-2k
The cerakote is $1k
Total just to buy it all is around 6500 in parts costs with cerakote.

Looking to do a quick sale for $6000

Fairly new to the rifle building scene. Just wondering what brands you recommend that work with a terminus zeus action. Caliber is 308, i was thinking 24-26” full steel is preferable as the weight of the gun is not an issue. Thank you

Anyone buy from Scopelist?? Are they good to go??
Thanks

Another Amish self-deletes in Austin , seems a 35 yr old Amish man was acting erratic in a Circle K throwing things then steals a truck from a customer at the gas pumps, but only makes it about 1/2 mile before turning the wrong way into oncoming traffic and hits head on into multiple vehicles, cops take him into custody but he dies in route to hospital, such a shame , another promising Amish life lost ,hahahahaha.

Login to view embedded media This guy did everything that I have been taught not to do.WOW!

Hi all,
I am still looking for a bolt action .22LR to learn fundamentals on. I had a previous thread about a specific rifle (Howa Trakr .22LR), but I decided to start a fresh thread because the scope of that one was intended for a specific rifle. (Moderators please feel free to move relevant posts from that post to this one). I know some alternate recommendations were made in that thread, but I'd like to get it moved it moved over to this thread that is more in more scope. That being said here are my requirements.

Requirements: .22 LR Bolt action, threaded barrel (suppressor ready), I would prefer a rifle that is Rem 700 platform based but not required, heavy bull barrel if possible.

Purpose: Learn fundamentals of shooting and zeroing, doping a scope and to save money on ammo. I will not be doing any rimfire competitions or anything like that so I don't need anything expensive and fancy. In a perfect world I would like my max budget to be about $300-$500, but if that isn't possible I could budge on that some.

Rifles I am considering:
CZ 457
Savage Mark II (I was told by a friend that the bolts in Savages are a pita to remove. If there is a mod for this that would be great because the prices on them are very attractive.)
Bergara B14 (If I can get one of the cheaper models and get the same performance/features from it as the B14 minus the stock that is fine. I can always upgrade it later)
possibly a Ruger RPR

Also if anyone is selling anything like this please let me know. I will mining the PX again today. I don't have a full membership though so I can't post WTB there.

Thank you in advance

Biden DHS docs suggested Trump supporters, military and religious people are likely violent terror threats.​

"A Department of Homeland Security (DHS) advisory board suggested that supporters of former President Donald Trump – as well as those who served in the military or are religious – have a greater possibility of posing domestic terrorism risks"



Check, check... and check. Damn I hit the trifecta with that one.
These fuckers are getting real worried.

Looks like one will be available soon.

The owner doesn't need it anymore.

SOLD
It pains me to do it but I just don’t shoot it enough or plan to. When I have time center fire is my focus. I had this built last year and have hardly shot it since then.
DI precision Barreled Action.
25” 1:13 Muller Barrel with EC V2s tuner MTU type Contour.
Foundation Centurion Dark Distress
Vudoo Bottom Metal
Trigger Tech Diamond 2-Stage
Wieband cheek pad
2 Vudoo mags
$4100 Shipped and insured to your FFL.
It was $5K to have this built. 2-300rds.
No Trades.

I shot Lapua Midas+ and Eley Match with success. The videos were using Eley Match.

7 round group 100yds .245” tuner testing.
Login to view embedded media
200yd 1” steel
Login to view embedded media Login to view embedded media Know your limits 100yds
Login to view embedded media

this fuck has had lots of practice.

Login to view embedded media

.

Cause AD's here would be a start.

Accuracy International AICS for Remington 700 Long Action. Comes with one magazine, one Picatinny Night Vision Rail, one Picarinny Rail w/ QD cup, one Harris Bipod adapter, and one Caldwell 6-9" bipod.

1200 shipped