SOLD Eric Reid GAP M40A1/A3 Barreled Action
- By Coejro
- Buy - Sell - Trade
- 1 Replies
Only trade I’d be interested in is a partial trade (+$ on your end) for a NXS 3.5-15x50 with mildot/MD2.0/ H58 reticle, a Leupold Mark 4 3.5-10x40 M3 (TMR or Mil dot) or a M3-10x Mark 4 (mildot)
PayPal F&F, Zelle, or USPS MO.
Your FFL must accept from a private party (or add $35 to cover the transfer fee mine charges
Most of us knew he was a POS long before this.
- The Bear Pit
- 10 Replies
Long ago in Fla we provided power for many venues. During the early 90's a US Navy Hydrofoil was docked in Tampa & needed a Mw dockside. We took a unit down an hooked her up. That afternoon we got a call from a guy with CBS who wants us to move the unit 80 feet so they could use the ship as back drop for this POS. I was called to go down & see WTF was going on, which I did. Upon arrival I found the Captain to see if he wanted it moved & to relay the cost of same. Doing it while still powering the ship would be costly, but if it could be shut down during would be much cheaper. He wanted to know who called, told him, and he said no way its getting shut down for that. The Navy would not pay that freight, which is what I suspected from the get go. Walked over to the CBS crew an told them the cost and that was when it all went to shit. They told that POS Rather and he blew a gasket. He walked over and started berating me and after about 30 seconds the Captain walked up and just rolled his eyes. Which to me was clearance to respond in hillbilly style most properly. They got their shot w/o the back round they wanted, as that genset never moved. The Captain offered me a tour and CBS wanted to go as well & he said NO. While getting the tour he was suddenly called away and over rode by higher ups, about CBS coming aboard. He just smiled and said if my Order had not get reversed by higher those "people" would have been shot if they were trying to get on here. The look in his eye convinced me he was not bluffing.
www.breitbart.com
Nolte: CBS Tries to Rehabilitate Disgraced Dan Rather
CBS has joined the campaign to rehab Dan Rather after he was fired from the network for trying to rig the 2004 presidential election.
www.breitbart.com
SOLD *SOLD*- Nightforce ATACR 4-16x42 F1 Scope w/ Spuhr 0 MOA mount
- By --BLACKOUT--
- Buy - Sell - Trade
- 2 Replies
*SOLD*- Nightforce 4-16x42 F1 Scope with Spuhr 0 moa mount.
This scope has been on my AR-10 and I have not been shooting it much. Scope is in good condition and comes with the box. The mount is the discontinued model without the quick detach, also have the box for it.
Scope and mount-$2100.00
Scope-$1850.00
Mount-$250
DM me we'll talk about payment and shipping.
NO trades at this time.
This scope has been on my AR-10 and I have not been shooting it much. Scope is in good condition and comes with the box. The mount is the discontinued model without the quick detach, also have the box for it.
Scope and mount-$2100.00
Scope-$1850.00
Mount-$250
DM me we'll talk about payment and shipping.
NO trades at this time.
SOLD March FX 1.5-15x42mm Shurken MIL FML-4
- Buy - Sell - Trade
- 5 Replies
D15V42FIMLX (MIL, Tactical, Illumi, Shuriken lock). Comes with original box and accessories. Excellent condition aside from a minor scuff on top turret. Mount not included. 2,450 shipped PayPal
SOLD ARC Magazines
- By Aklenk8
- Buy - Sell - Trade
- 2 Replies
Selling two used ARC magazines with LRI followers. Both have been used in matches but are in great working order. I may also have the original followers if wanted by the buyer. $140 shipped for the pair.
Gay tiger
- By Mj1995
- The Bear Pit
- 6 Replies
If anyone shooting the gay tiger cartridges was interested in getting a shirt. These are in the kids section at target. Didn't check adult's section. Shooting a gt? Have your kids at the match cheering you on in this shirt!
Feedback Another scammer: Eliteshotgunshop.com
- By GBMaryland
- Buy - Sell - Trade
- 4 Replies
I just got this an email from Cole Gun. If you’re a shotgun or you probably know about them, their primary claim the fame is they will make you a really decent stock for a shotgun or rifle…
Gavin Newsom Asks Social Media Users to Help Design New California Coin and it Blows Up in His Face.
- By PatMiles
- The Bear Pit
- 5 Replies
Oops: Gavin Newsom Asks Social Media Users to Help Design New California Coin and it Blows Up in His Face | The Gateway Pundit | by Cullen Linebarger
California Governor Gavin Newsom asked social media users to help design a new $1 coin to honor the state’s innovations on Thursday, and it unsurprisingly blew up in his face.
www.thegatewaypundit.com
California Governor Gavin Newsom asked social media users to help design a new $1 coin to honor the state’s innovations on Thursday, and it unsurprisingly blew up in his face.
As Gateway Pundit readers know, the Golden State is suffering from various maladies under Newsom’s watch. These include a severe homelessness epidemic, skyrocketing crime, unaffordable taxes, and high electricity costs.
This has led to a mass exodus of businesses and residents. But Newsom, for some reason, thought social media users would lavish California with praise instead.
Newsom probably wishes he never clicked “publish” because the replies he received were universally negative. Many of these focused on the filthy streets, Californians leaving for greener pastures, and even Newsom’s tyrannical COVID-19 pandemic policies.
Here are some of the most savage replies:
YOU KNOW THAT THE COIN IS GOING TO DEPICT CALIFORNIA AS THE LAND OF MILK AND HONEY!
Optics Minox ZP5 5-25 - 1500$ - with seekins / vortex Rings
- By BLopina
- Buy - Sell - Trade
- 4 Replies
For sale I have a used Minox ZP5 5-25
It is 5 years old but hasn’t been used a ton on my backup gun. I’m downsizing to 1 gun.
This scope tracks true and I’d trust my life to it. It has no major blemishes. It does however have some discoloration on the turrets from the anodizing type they use.
I have only cleaned the lenses once and do everything I can to keep them clean. There are no scratches, water spots, etc. always use lens caps!
All turret marks line up perfectly on this one and it has really nice tactics clicks. 3rd gen turrets. Crispy!
I will post some more pictures when I get home.
Will accept all money offers. No trades please.
It is 5 years old but hasn’t been used a ton on my backup gun. I’m downsizing to 1 gun.
This scope tracks true and I’d trust my life to it. It has no major blemishes. It does however have some discoloration on the turrets from the anodizing type they use.
I have only cleaned the lenses once and do everything I can to keep them clean. There are no scratches, water spots, etc. always use lens caps!
All turret marks line up perfectly on this one and it has really nice tactics clicks. 3rd gen turrets. Crispy!
I will post some more pictures when I get home.
Will accept all money offers. No trades please.
Marshal dead in shootout in Charlotte
- By Fig
- The Bear Pit
- 131 Replies
BREAKING UPDATE: Four Charlotte Law Enforcement Officers Dead, Several Wounded in Shootout - Suspect is Also Dead | The Gateway Pundit | by Cristina Laila
Update: 4 law enforcement officers are dead and five are wounded after a shootout with a suspect.
www.thegatewaypundit.com
I'm amazed this doesn't happen more often with the kinds of warrants that US Marshals serve. I'm sure when we find out who the perp is (most likely posthumously) he's going to be the worst of the worst.
SOLD Not your average 640!
- By mi650
- Buy - Sell - Trade
- 4 Replies
Gone to auction.
Very nice low mileage 640 no dash, ported, adjustable front sight, 3" barrel (actually measures 2 3/4).
And it's .38 Special, not .357!
$925 ftf, or + shipping from my ffl to yours. All considered, this is the low end of estimates.
Comes with an S&W case, not sure it's the original.
Very nice low mileage 640 no dash, ported, adjustable front sight, 3" barrel (actually measures 2 3/4).
And it's .38 Special, not .357!
$925 ftf, or + shipping from my ffl to yours. All considered, this is the low end of estimates.
Comes with an S&W case, not sure it's the original.
When and Why Group Buys
- By Lowlight
- The Armory
- 53 Replies
Over the years, Sniper's Hide has done a ton of group buys. Some of the older members will still go that route, like @bohem did from Patriot Valley last week.
Group buys are a great way to engage the community, highlight your service or get a new product off the ground. Some notable first time group buys include Glen Seekins, the very first Seekins were released on here via a group buy.
A few things have changed over the years. In the past people didn't mind ordering it upfront, or helping them craft the product to build. Like the McMillan A5 stock that was designed on here, it became one of their most popular stocks to date. The members here over the years have asked companies to take a risk on their ideas and often they have worked out for all parties. The A5 bottom metal is one example, we launched it here to see how it worked.
I wouldn't mind seeing a few more, bigger projects, etc, every now and then someone will ask a question about it, but when they hear about changes to the model, they often say no. Guys what stuff now, nobody wants to wait, which is unfortunate as something do take time and resources. If you have them, a group buy can still work, as well to conduct market research. How will your idea be received, do people like it as is, or should you modify it ? All solid questions a company today might ask.
I have a small group buy in the works right now. This is an old school one that came back around as part of a request. So I wanted to drop a few breadcrumbs to show you what we have in mind, how we want to drop this buy, and what extras we're are putting in.
First off,
Documenting the project as you go... we started off with a question on the forum, the next step is making chips.'
Right you have to make stuff, and I need some rings, QD that wins a majority of the Army tests. Sure they might drop a competitor on top, but when you look at the numbers, this is no holds bar champ out there. Don't let em fool ya, they can replace smaller parts, bipods, slings, and mounts so the contract winner isn't always the contract company. On top of that, if they swap it out for a cheaper brand they can keep the difference.
If you ever want to an Alaska Precision Rifle class, we check scopes. Every class we check scopes. Why because scopes, mounting, came be a problem that shows up downrange. Knowing your stuff works, comes on and off correctly is important. We don't damage control the scopes too much when we see an issue, no time. Instead we swap them out and our main mount is this one.
So here is an example of the mounts. I have a very long relationship with GDI going back to Rifles Only Days.
They was the Prymid from a few years ago, the version Marco is release is going to be the PROM which is the full sized model vs the smaller option.
The mounting system is really the claim to fame here. These mounts are perfect for in the field, You lock them one, you can secure even better with a 1/4 turn on the slot screws and they have near perfect return to zero.
In about 3 weeks' we'll announce a group buy, discounts for SH Members, Branded T Shirt, fast shipping. Standby
Group buys are a great way to engage the community, highlight your service or get a new product off the ground. Some notable first time group buys include Glen Seekins, the very first Seekins were released on here via a group buy.
A few things have changed over the years. In the past people didn't mind ordering it upfront, or helping them craft the product to build. Like the McMillan A5 stock that was designed on here, it became one of their most popular stocks to date. The members here over the years have asked companies to take a risk on their ideas and often they have worked out for all parties. The A5 bottom metal is one example, we launched it here to see how it worked.
I wouldn't mind seeing a few more, bigger projects, etc, every now and then someone will ask a question about it, but when they hear about changes to the model, they often say no. Guys what stuff now, nobody wants to wait, which is unfortunate as something do take time and resources. If you have them, a group buy can still work, as well to conduct market research. How will your idea be received, do people like it as is, or should you modify it ? All solid questions a company today might ask.
I have a small group buy in the works right now. This is an old school one that came back around as part of a request. So I wanted to drop a few breadcrumbs to show you what we have in mind, how we want to drop this buy, and what extras we're are putting in.
First off,
Documenting the project as you go... we started off with a question on the forum, the next step is making chips.'
Right you have to make stuff, and I need some rings, QD that wins a majority of the Army tests. Sure they might drop a competitor on top, but when you look at the numbers, this is no holds bar champ out there. Don't let em fool ya, they can replace smaller parts, bipods, slings, and mounts so the contract winner isn't always the contract company. On top of that, if they swap it out for a cheaper brand they can keep the difference.
If you ever want to an Alaska Precision Rifle class, we check scopes. Every class we check scopes. Why because scopes, mounting, came be a problem that shows up downrange. Knowing your stuff works, comes on and off correctly is important. We don't damage control the scopes too much when we see an issue, no time. Instead we swap them out and our main mount is this one.
So here is an example of the mounts. I have a very long relationship with GDI going back to Rifles Only Days.
They was the Prymid from a few years ago, the version Marco is release is going to be the PROM which is the full sized model vs the smaller option.
The mounting system is really the claim to fame here. These mounts are perfect for in the field, You lock them one, you can secure even better with a 1/4 turn on the slot screws and they have near perfect return to zero.
In about 3 weeks' we'll announce a group buy, discounts for SH Members, Branded T Shirt, fast shipping. Standby
SOLD SAC creedmoor sizing die
- By Mudman61
- Buy - Sell - Trade
- 3 Replies
SOLD Short Action Custom creedmoor sizing die with .290 bushing almost new sized about 200 rounds
PayPal only
PayPal only
