I have 3 Wiebad Tater Tot Fortune cookies for sale:
Left bag is like new (used once) with their Edge fill SOLD
Center bag is well used with seam repairs and glass bead fill SOLD
Right bag is Team USA version (embroidered flag logo) with heavy sand fill SOLD
PayPal F&F

First thing I’ll say is no, I do not partake in the consumption of marijuana.

A year ago, while I was working at a smaller family-run CNC shop (mill operator) I came across a job listing for industrial maintenance. The job paid $8/hr more than I was making, with much better benefits and PTO. Monday through Thursday dayshift schedule. This being a no-brainer, I was offered the job and accepted.

What I didn’t realize was that the money I was making, most banks consider “dirty” and auto & home loans are almost impossible to secure without some form of questionable doings. Which is huge for, because at 33Y/O I’m finally in the position to buy my first home.

So now here I am. A year later, unable to make these dreams a possibility (something I wish I’d known beforehand) and am now forced to look for work again, fearing I will never land anything because I work in cannabis and therefore, I must be a dirty lazy pothead.

To all of you, never consider this career. I’ve been in manufacturing for 15 years and thought I’d jump into “the next frontier”, but it’s holding me back from what I’d like to do.

You know who you are Dbag

I got this at Christmas and it's a super nice set. I just have several different sets of comparators and need to streamline a little bit. This is the full kit with Stand.

$350.00 shipped CONUS

SOLD

Hey guys

Has anyone ever had their 22lr suddenly lose its accuracy?
My std CZ 452 has been a tack driver from new almost 10 years ago.
As it was always capable of at least a few single ragged hole groups on any range session whether the barrel was clean or dirty, I just ran a few wet and dry Hoppes#9 followed by an oil patch after every shoot.

It just stopped shooting well and the pattern was a real low 1st shot up to 2" 2nd shot about 1" low, then worked up to the 10 ring and starts grouping OK.

It got a new scope and eliminated ammo and all the usual things.
Then scrubbed and scrubbed the chamber as a carbon ring was suspected, then bought a Teslon bore scope.
It seemed to be shooting well on rimfire silhouettes getting strings of 4 hits in a row standing pole-supported.

Last week in good conditions I shot some groups and they are near enough a straight line with the same vertical dispersion.
Could bet on the super low 1st shot , then climbs and starts grouping.
Shooting it's fav SK std ammo and by the 4th group it starts shooting well including 5 touching.
Put it down and shoot another rifle, pick it up and load up some mags with CCI std and it shoots a few identical 3-4" straight line groups and then starts shooting OK.

Previously if ammo testing and unsure, I could just load a mag of SK and it would often shoot a single hole, no need to shoot the same ammo.
It can only be the rifle or stock causing it and the dollar note feels the same as always, clearance and only tight up near the action.
I have been working up with action screw torque and was up high at over 25 inch/lbs so have backed down to about 15 and 10 on that middle screw. If that's not it, I may have to sand the wood a touch in the barrel channel.

After that, I am out of options and my local gunsmith can look with his bore scope and check out my targets.

So sad as it was my first rifle and always shot like a laser, often I could put 10 shots out on the 200yd target without a big scope, just walk the shots onto the target and aim a rock above. Often got a fist-to-hand-sized cluster with 1 or 2 flyers.

Do you blokes know what these straight line groups working up can be caused by?

Hey guys. Some of you helped me decide on a LWRC DI as a patrol/farm defense rifle. I am looking for a rugged optic. I had considered a LPVO but have read they aren’t quite as reliable as a dot/holographic. I’m thinking about an eotech XPS2-0. Anything better under $500?

Ok, yes I’m getting older, set in my ways and eye modern technology with a jaded eye. That being said, am I the last of the breed that still prefers the old M1907 sling? Now I will admit that I have discovered the wonderful biothane versions from Turner Saddlery that are practically maintenance-free but it’s still the old M1907 pattern. I tried the Quick-cuff sling from US Tactical but never could warm up to leaving the detachable loop on my arm and wound up using it as a carry strap, never getting the stability the loop would provide and went back to my old trusty design. Is the 116 year old design of the M1907 still relevant today or is a symbol of days gone by reserved for us old dinosaur?

"High prices" 350 each. You cant get a mutt from the dog pound for that. And that's not even the biggest load.

Elon Musk posted the other day a message about USA forever transforming into a global shithole unless a red wave sweeps the country this years election,

I predict that in 2 or 3 generations (I’ll be dead) the Marxists Swampers will have the 2/3 majority needed to overturn the 2nd Amendment. The invasion by tens of millions of illegal aliens across America into the red states is the pathway for the deep state to negate the founding fathers vision of liberty and freedom from tyranny

MPA BA Comp Chassis Black SA with NV bridge, very good condition. Only scratch is shown in images below. Asking $765 Shipped or trade for Manners MCS PRS-TCS with cash added on my end.

A long time ago - it feels that way anyway - lol, I bought some 6.5mm 140gr SMK by AAC off PSA.com. Thing that appealed to me was that it was $20 for 20 rounds. That's a helluva deal when Hornady ELD-M 140gr is approaching $55 for 20. Being in Wyoming, finding a good time to go out and drive the 2.5hrs one-way to the closest range that shoot out to 1000yds or more is difficult, especially when ammo isn't cheap and neither is gas.

Today, I decided to get the rifle out of the closet and go shoot some sighting-in rounds with the new ammo at the local 100yd indoor range. A lot cheaper to go the range when you've already bought the ammo. LOL

Grabbed two targets just to see how things would go. Brought 60rds with me, but ended up just shooting 40. Didn't need to blow through my stash just yet, especially with spring just around the corner here. Maybe I'll get down to Laramie to the range sooner than I expected.

Here's the album - https://flickr.com/photos/cybrslydr/albums/72177720315487376

All were shot with a bipod, no bag. Forgot to bring it and actually, still need to buy me a tater tot...

I'm very happy with how the AAC ammo shot. For it's price, it shoots just as well as the vastly more expensive Hornady or other brands. So much so, I went home and bought 4 more boxes at $21.99 each.

A couple of the 5-shot groups I knew I pulled and had a flier as soon as I shot. I tried to take about 5min between groups to let the barrel cool down a bit, but the last two groups I just shot back-to-back since they were the final ones. First pic with the center target was getting the rifle sighted in. Next was top right, top left, bottom left, and bottom right. The bottom right group is my best of the day, IMHO. So bummed I pulled that one - that's one that I knew I pulled as soon as the gun went bang. So frustrating! lol

Hey all! First sale post for me here on the forum, so please feel free to ask for whatever verification or additional photos/info/whatever you need from me to feel comfortable doing business. I have a good amount of feedback on TacSwap as well.

I am looking to sell my very lightly used NX8 2.5-20 with the Mil-XT reticle.

This was bought new from and mounted by Mile High Shooting last year. Since then, I've put maybe 200 rounds on it. No issues, excellent glass, really great optic, I'm just going a different direction with the rifle this was intended for. I am looking for $1675 for the optic. I can include the Geissele 20MOA mount it is pictured with for $1800. It will ship in the original Nightforce box with all accessories it came with, including Nightforce flip-up lens caps.

Price includes insured shipping via either UPS or USPS, buyers preference.

Is there a way to identify the older carbon origin actions vs the newer stainless origins?

Is there a difference in bolt lift/close and cycling smoothness/binding between the 2?

Have the opportunity to buy a used origin and trying to figure out if I want it or not.

Thanks.

I picked up a Garmin March 8th and had it out in the field March 12. No problem, reading the right speed with rifle A. I take it out today March 16th, it reading high with four different rifles like 25fps with 22lr, 50fps with 17hmr and 100 FPS with centerfire. Any ideas?

Sold the B/A I had in this stock (700 Tactical 223) and no longer need the stock

$500 Shipped

I've got a couple of items for sale. Prices are shipped to lower 48. Payment through Venmo, PP F&F.

Berger 208 LRHT (250) - unopened: SOLD



Lapua 338 Lapua brass. 80 virgin, 20 once fired. Will come in MTM ammo box. SOLD



Can provide more pictures if necessary.

I’ve spent the last week researching production division minded rifles and reading through the forums here. The general consensus from all of my fellow degenerates is that most if not all big brand production rifles (DD, Seekins, Aero, etc) are not up to par. The second consensus is that the MPA and GAP are the best within that division. The third is that building a rifle in open class can be done with a very similar or better price point, and better performance.

It’s time to put your money where your mouth is and figure out the build!
So here’s my challenge boys and girls.
Put a build list in your reply for a full build minus glass, bipods, and bag and include prices.
Requirements as follows:

1) Build must be no more than $3000

2) Build must have a sub MOA capability, preferably 1/2 MOA (gunsmithing permitting of course)

3)Chassis/stock must include adjustable ergonomics (the more the better)

4) Accessories required include an ARCA rail, quality muzzle brake, and 20MOA rail

Bonus points for price saved and extra (useful) features.

BUILD ONE YOUD WANT TO SHOOT!

Not a real competition with prizes. Just figured it would be interesting to see what everyone comes up with and a quality waste of time for some of the more experienced members that could prove useful to the newer ones!

An old photo I found today while digging through old crap. This is a US Optics 1.8-10x44 with prototype knobs as submitted for the USMC RFP for replacement of the Unertl MST100. I took this photo in about 2005. I later gave the scope away….

Bighorn Ti3 titanium short action .308 bolt face. Original owner. Has about 200 rounds on it. Weighs 22oz. Selling to move to a medium action. $1600 shipped from my FFL to yours. Prefer payment by check, but can discuss Zelle or Venmo.

I’ll get pics up later this weekend.

Thanks,

Selling my Custom bolt action with less than 100 rounds fired. Asking $4500 open to offers. Parts list below. *(Scope is not included)*

-Terminus Zeus QC Action With .308 Bolt

-Manners MCS-TCS Stock With full weights

-.308 Proof Research Stainless Steel Barrel 26in

-Area 419 Hellfire Match Self Timing Muzzle Brake

-TriggerTech Diamond Trigger

-Wiebad Cheekpad

*Scope not included

Selling my Annealeez gen 2, comes with 3 sets of wheels, catch container, power cord and torch head. The wheels are large case, short case and super short.

Looking for $225 sold!!!

Like-new condition, very accurate 6.5 Creedmoor rifle built by SAC on a BAT VR action (Rem 700 footprint). 24" Bartlein barrel with OD 0.875" at the muzzle. Manners PRS-1 MCS stock with mini-chassis and adjustable butt plate. TacSport Pro trigger. 15" Area 419 ARCA rail and muzzle brake. Shot very little (< 300 rounds).

$3100 shipped to your FFL.
Scope/rings not included (can be purchased).

anyone know who make a quck detached arca clamp for an atlas bipod? currently have an adm-170 on it now for picatinny

After a 7 month ordeal, that was supposed to take 10-12 weeks, I received my 6 ARC barrel from Compass Lake Engineering. Haven't put it together yet, as work stuff has kept me busy. Went to mock up my muzzle device to see how much timing it needed. Muzzle device will thread on properly and seat on the shoulder, as it has an inside relief cut before the threads start, but the peel washer that thunderbeast sent me with my muzzle device won't seat on the shoulder,as the OD of the barrel at the end of the threads is too large.