I have a set of gen2 ckyepod prs shorts that are lightly used with arca head for $485 shipped.

Forester Co-Ax press. Cover, long, and short handle. The short handle knob has worked itself off and I've "repaired" it by putting masking tape around the shaft to hold the ball handle a bit better. Works but not perfect. The long handle is in perfect shape. The press itself is in perfect working order but the primer cup shows a lot of use. See pics.

$350 shipped OBO. SOLD

WTS: NF Atacr 4-16x42 mil-xt. Like new. Bought new from euro optic. Mounted went to range twice. Need to fund annother 22lr build. Includes box and everything it came with.

$2100 PayPal f&f shipped conus

I'm usually with Geissele (can't afford a real one)

Which ones do you guys usually go for?

Here’s what’s I have for sell 25 creedmoor rifle chassis is sphur folder with internal and external weights. Action is cutis valor with 26in benchmark barrel 5/8x24 thread at the muzzle with mdt 12 round magazine and trigger tech red diamond single stages. This is a turn key rifle. I have the reloading stuff to include:
1. 200 round of Lapua small rifle brass
2. 400ish 135 Berger hybrid
3. Short action full length sizer .282 neck shoulder bushing .262 mandrel
4. Whidden Mirco seater 6.5 creedmoor
Asking $3800.00 shipped

Because it's not who votes, it's who counts the votes.

UK, France... Guess they figure November is going to be a Dem Landslide... even if every Dem stays home...

Sirhr

I have a rim-x with a 25” Shilian ratchet barrel with a harrels tuner barrel is 1.20 for a couple inches then strait to 900 it’s a 1-16 twist this barrel action was chambered by Jonathon at modacam rifles

Barreled action $1950 shipped

Scope NXS 5.5x22x56 C434 model $1550 shipped

Stock is a carbon fiber 700sa not sure of brand has had some dremel work to make different actions work but is in ok shape $625 shipped

Know your state laws for fire arm purchasing and shipping this will be shipped from and individual to your ffl and this is cross posted time stamp wins in case of dispute thanks for looking

Trigger is not for sale

Like newish gen 2 double pull ckye pod, been out of the house once. 699$ shipped

I take Apple Pay, Venmo, Zelle. PayPal if need be but rather not.
F&F payments only.

SOLD





Lower 48 states only

Located in Georgia

Is it safe to use CLR for cleaning a nickel boron bcg? I have a number of BC's that are made of nickel boron and was wondering if the chemicals in CLR will harm any of the parts in it. IE - Firing pin, bolt, gas key etc.

Like new nx8 2.5-20 with mil-xt reticle. Scope has light ring marks but otherwise looks new. Scope was bought new in April. I'm wanting something a little lighter for my hunting rifle. $1650.00 shipped. Postal money order preferred or PayPal g&s and you cover the fees.

Anyone seen when the long action calibers will be available??? Keep waiting and waiting.. just curious if anyone has any info on these. Thanks

Scope is sold

Brand new scope won in match today. $420 in dallas area or add $20 for shipping.

Trades interested in:

1. Redding S type 6 dasher micrometer seating die + Full length sizing die
2. Lapua 338 brass + cash
3. Retumbo + cash

Hello,

I’m looking for a brick of federal GM215M.

Even if you can help me with a few trays I’d appreciate it as my stock is getting concern-ably low.

I've decided to at least try a tuner w/ my Vudoo. Which one do you recommend?

I am at crossroads deciding which cartridge for my next upper.. I plan to target shooting 1000+ yds, hunting, maybe some competing..

On this build, I plan using a MPVO..

I have built an AR 10.3 pistol with Aero/Ballistic Advantage, BCM, EOTech, Mimtac, Skalarworks BUIS, streamlight...etc

The build is an ADM UIC, 16" Criterion, Radian, Element Optics Immersive 5 X 34, Meprolight MPS DF, streamlight, Mimtac.. this was is a sub MOA tack driver, BCM..etc..


What are your suggestions?

A good friend of mine is cleaned out his safe and wanted some help selling. I can get pictures or info on any of these guns just DM me. Located in NorCal.

mini 14 $850
348 mod 71 win $2,000
win 94 30/30 $SOLD
Ruger number 1 25-06. $1,500
450 marlin $1,500
Winchester 9410 .410 $1,400
Savage 22 bolt $300

SOLD
I am selling my Benelli M4 tactical shotgun that I bought brand new. It’s seen one range trip and one box (25 shells) of ammo. It’s mint condition and looks brand new. I never modified or tinkered with any of the factory parts. I did install a Leupold Delta Point pro rds and mount on the rail. Will ship from my FFL to your FFL. Will not ship to any ban states. Thanks for looking! No trades. $1,750 with red dot. $1,600 with out red dot.

I did some math to figure out if I wanted a 0 or 20 MOA mount for the ATACR 4-16 with MIL XT on my 5.56 rifle shoting 77 grain open tip match rounds.

I came to the conclusion that a 0 MOA base would give you better optical quality at your 100 yard zero, which you could then hold for shots out to 600 yards (which is most all I'll ever shoot).

Is it feasible to hold to 600 yards with the MIL XT reticle on a 5.56 (requires about a 5 MIL hold)?





The math and reasoning:

The internet tells me you need about 4.5 MOA elevation for a 100 yard 5.56 zero. So with a 20 MOA base, you'd actually have to dial down (from center of elevation adjustment) -15.5 MOA to zero at 100 yards = worse optical quality @ 100 yard zero.

With a 0 MOA mount, your 100 yard zero would only be deviated from center +4.5 MOA (+1.3 MIL) = better optical quality @ 100 yard zero.

A 5 mil hold (which I assume is feasible on the Mil XT reticle?) will get you past 600 yards. So, with a 0 MOA mount you will have better optical quality holding to 600 yards than a 20 MOA mount. You would have to dial the 20 MOA mount all the way out to 500 yards to get the same optical quality as the the 0 MOA mount @ 100 yards, and dialed to 500-~700 yards, would have better optical quality.

So for shots out to ~600 yards using a MIL XT reticle, a 0 MOA mount will give you the best optical quality (which will be most of my shooting). The remaining 11.7 MIL of available elevation will get you a little past 900 yards, and you can then hold for silly shots to 1000 yards. If you were shooting past 500 yards all the time with 5.56, a 20 MOA mount would be best.

.

Marc is Back !





Day one in the books

The triumphant return of Marc Taylor to the Classroom

Several items for sale. Payment accepted is PPf&f (no comments), Zelle, or USPS money order. Insurance extra.
Not looking for any trades at this time.
Make sure your FFL will accept from an individual.

1. RRS TVC 33X with Anvil 30 - This is a MK1 version. Some cosmetic scuffs on the legs, does not affect functionality. Recently cleaned and greased, all springs in the locks replaced last year. Anvil 30 is like new. 61.5in tall at highest position. SOLD.

2. Foundation Centurion - RH Terminus Zeus SA inlet, with Hawkins M5, brass weights and full length ARCA rail and action screws. Standard fill. Slight scuffing on the bottom butt - See pics. SOLD

3. Trijicon RMR Type 1. 3.25MOA with pic mounting base. Needs battery CR2032 works as should. Nicks on top left of sight captured in pics. SOLD
Will ship in Trijicon box with accessories, but this is not the right box for this unit.

4. Bartlein LHGT 1:8.25 to 1:7.5twist M24 profile 6 creedmoor. Barrel chambered by Bugholes for Terminus Zeus QC. Threaded 5/8x24. 398 documented rounds down the pipe. Factory ammo only. SOLD

5. Tangent Theta 5x25x56 Gen3XR Reticle - Scope has always been wrapped in vet tape. comes with original box, scope chaps, Anarchy Outdoors throw lever and all factory accessories. $3700

6. ARC M-Brace 1.5in 34mm 20MOA scope mount. Like new - SOLD

7. ARC M-Brace LRF bridge. Like new - SOLD

8.Terminus Zeus RH SA magnum bolt. New without box- $375

9. Kahles 56mm sun shade. Will fit TT. New in box. SOLD

10. 3 MDT mags. 2 10rd with 419 extenders and 1 12rd. SOLD

11. 2 Tab Gear 40rd SA bullet binders. Multicam. - SOLD

12. Tab Gear magazine holder. Black multicam. $35

13. Pic rail data card holder w/cards. $40

14. Kestrel 5700 Sportsman w/AB. Can be upgraded to Elite. Missing the body attachment to use with weather vane. Otherwise great condition. - SOLD

15. AG pint size game changer, heavy fill. No rips or tears. Black stains on one side. - SOLD

16. HFB SOPHS w/kydex sheath. New w/o box. - $235

17. GA Precision Templar V2 6.5 creedmoor barreled action 1:8. GAP 6 contour (Remington heavy varmint) threaded 5/8x24. TBAC CB included. 371 documented rounds. SOLD

18. BNIB CDG Short action RH, .378 bolt face, 20MOA, fluted bolt, red pivoting handle. - SOLD

19. BNIB CDG Long action RH, .535 bolt face, 30MOA, fluted bolt, red pivoting handle - SOLD

20. BNIB CDG action wrench. Option to person buying an action. SOLD

Seems as of late a few top PRS shooters have left Vortex Gen3 and TT. Are there reliability issues we are not aware of? I have a couple of Gen3, no experience w TT

I’ve got 2 of these that are new.

$525 shipped each.