I have to following for sale

A large Triad tapered rear bag in multicam.
Never used
SOLD

Wiebad mini tac pad in multicam.
As new condition.
SOLD.

Coletac Boss bag.
As new condition
SOLD.

Crosstac Tactical Rear Squeeze Bag.
With the rubber grip surface.
SOLD.

I'm done with this caliber....again.

1. SOLD x194 PC's Lapua 6BR brass. I annealed these with my AMP Aztech, sized them and polished them thinking I was going to use them but never did.
2. x44 PC's same, but recently fired.

Both 1. & 2., x238 PC's $200 shipped. (Includes Wilson case gauge)

3. PVA 6BR shouldered prefit (TL3) barrel, 8-twist, 24", medium Palma, 5/8-24 muzzle (rattle canned OD green). Has probably 800 rounds on it. My son used it for one match (GAP Grind) when he was 14. Otherwise it's been a gopher slayer. $200

4. SOLD Dies: RCBS bushing style (no bushing incl.) FL sizer, $70
Wilson arbor style seater, $75


Prices are shipped, CONUS.

Venmo or Zelle. (I don't have a PayPal acct.)

Looking to get into a Bergara but have zero interest in a dbm set up. Just don’t have a use or desire. Plan on buying just the barreled action.

I have a McM A3 sitting here I’d like to use. I’ve seen the single shot mag replacement block and figured I could just adapt that to work with my non M5 stock.

Is there a better option or does anyone see where what I’ve described as a no go option?

Do I need to lap vortex pro rifle scope rings ?

I ordered another 3000 watt Pure Sine wave inverter, and a few more adjustable 12Vdc relays.

Question for all you photography buffs in the hide , I've got a fishing trip coming up in late July early August to the Keni River in Alaska, and need recommendations for a midrange under 300.00 camera , I haven't bought a new camera since the smart phones started including cameras, my last one was a Panasonic that is only 6 mega pixels, and although it takes perry good pictures, I know I can do better with a more modern higher resolution model , needs to be fairly compact for obvious reasons, what say the hide.

Benelli M4
Sub 200 rounds at least.

Fixed stock
5rd tube

Pretty straight forward.
Not looking for any trades. Going to find the receiver work on a 417 A2.

$1600 shipped to your FFL

Vudoo V-22 Gen 1 Purchased new from Vudoo by me in Feb 2020. Delivered in March of 2020. Purchased cerakoted and with Calvin elite 2 stage, flat face trigger installed.

KRG Bravo stock

5 Vudoo mags (most unused) 2 with logo, 2 without.

Purchased with intentions of completing, but as the story goes… never happened. I have between 200-300 rounds of SK ammo through it. Rifle is more accurate than I am.

$SOLD shipped to your FFL

Had feedback from the Hide went paid and didn’t realized I had lost it. Happy to provide references or video / FaceTime

Will be listing a pair of Vortex optics that came off this and my ARC Nuc rifle as well.

Small amount of premium .22 ammo if you are in NH available.

MDT ACC Premier Chassis Base, R700 SA RH

Never used or fired from. Started a build then stopped. Essentially new, including pistol grip, action screws and grip tape with sale.

$550 shipped, normally $750 before shipping/ tax


Zelle or PPFF

Nicely equipped PRS TCS in RH for R700 SA.

-Copperhead color
-Gen 2 mini chassis
-Double dead fill
-Sikes rail and clutch
-Arca rail with 2 weights
-10 oz rear weight
-New without box
-Includes action screws
-Add 5 round AI AICS 308 case size mag for $50.

Zelle preferred and no trades needed.

$SOLD shipped ground lower 48.

Impact 737 SA Inlet
Awesome condition Black version Foundation Centurion with OTM bottom Metal, Full Arca Rail, and Weights.

SOLD

I bought 2 of these and decided to go with a MK4HD on my other gun. In great shape, used a couple times.
$1800TYD for bare scope
$1900 for scope and MDT Elite rings 1” height
$1975 with Area 419 rings 1.2” height. DM for pics.

Turns out all you need is a better spongy trigger. Who knew.
Only question left is, LPVO or RD+magnifier to start dominating PRS?

please guys how and where am I to post for sale. Thanks

You got your answer. Do this again and you will be banned. - The Management

LMT MWS in excellent condition. The upper chassis is new/unfired; lower fired < 200 rounds with the previous 308 barrel. On the rifle right now is a new 20" SS 6.5 Creedmoor barrel, unfired after factory. I also have a new 16" CL 308 barrel still in the factory tube. The trigger is a Geissele SD-E. The current CA-complaint fin-grip will be replaced with a regular grip. The muzzle brake is to be restored with an LMT factory flash hider. The bipod is not included.

Several buying options:
(1) No barrel: 1950 shipped to your FFL.
(2) Add 600 for the 6.5 barrel.
(3) Add 450 for the 308 barrel.

Rifle sold pending fund.
Barrels available for purchase

Selling a used, single stage Timney Remington 700 trigger. Weight feels about 3.5-4#. I received this in a trade and unfortunately don't know much more about it. Comes as shown

*Full Disclosure: The nut on the back of the housing comes loose without a bonding agent. When I received the trigger it was loctited in place. I made an adjustment, tightened the nut without a bonding agent and expected it not to move. It eventually backed it's way out again and was causing a slam fire after 100 or so rounds.

Figured I'd list this if someone wants a trigger to mess with or would like to loctite/epoxy the nut in back place.

SOLD

No trades please.

SOLD THANK YOU This is a touchy subject/ item that I am hesitantly posting because I can’t see any use for nor afford in its present condition..
I picked this awesome optic up 2 years ago for a great price ( now not so great) with big plans to integrate into our training curriculum. However I noticed some corrosion in the battery terminal and sent it in for warranty repair only to be told by L3 that the imager was dying. So, my great deal turned into not a great deal because we are in the middle of some substantial construction and I cannot afford to double my investment into it inorder to repair it. No matter how bad ass it is, and it is if you’re ever used one, almost overwhelming...

currently, everything still works, the battery corrosion issue was fixed, but a small spot appears on the image that I imagine is an indicator of impending failure. This unit has extremely low hours, in fact we used it less than 1 in total before sending it back.

L3 quoted roughly 6,000 to repair the units camera/ FPGA. If anyone here is interested in picking up a fixer upper or parts this is all you. Please message me for info. I’ll post pics if there is any interest, it’s in otherwise perfect condition. Comes with pelican, manual and all small parts. Acquired legally, etc… make me an offer otherwise asking 3,000 or open to trades for optics with a t3 reticle, etc.

Thanks fellas

I am selling my Giraud power case trimmer. It is currently set up for 308. Comes with everything that is original. I am selling it for $450.

Imagine was to large so here is a link.
https://ibb.co/HnqC9Hm

Not sure if this is the right spot for this, feel free to move if needed.

I have seen a serious drop in the consistency of some factory “match “ ammo the last few years.
Wondering if there is any ammo manufacturers that have maintained pre C19 quality.

My own use is 308, 6.5 and 6cm but have seen the same in other calibers as well.

.

I am selling my Fn SPR a1 rifle. It has seen very little use, round count is around 400. The barrel has been threaded 5/8-24 and has a 2 port muzzle brake on it. It has the Fn tbm bottom metal which I have 4 mags for. 1-10 round and 3-5 round. Also have the factory bottom metal and mag. I painted the stock.
Rifle is very accurate with the reloads I have and also with fgmm 175 ammo.
I have 121 reloads for it and 159 pieces of 2x Peterson brass.
I would like to sell everything together as I am getting out of shooting 308.
For rifle, mags, bottom metal, reloads and brass I’m am looking to get $1700
Message for any other questions.

Beautiful scope just looking for more magnification. DLR / CCW / SKMR4
$2700 shipped OBO

He is looking pretty rough. F!@$ cancer

Login to view embedded media

Barreled action by RWS
Defiance tenacity
Proof stainless
Threaded and blended cap
New never fired
$1800 shipped

So after searching this forum and elsewhere online, and basically finding no source of information on this, I figure let’s start a thread on the apparently VERY little known M83 sniper rifle, built by NSWC Crane for the Navy SEALs sometime in the 1980s, before the M86.

I will share the little information I have been informed about, and let others with actual direct or otherwise knowledge share what they wish, including any photos of either actual or clone M83s.

From what I have gathered, the M83 was built in-house at Crane and consisted of the following specs:
- Remington 700 short action chambered in 7.62 NATO, mostly with the ADL blind magazine box
- McMillan silhouette stock in early desert smear camo (with the green)
- Custom made scope base with 30mm Leupold & Stevens Ultra rings
- Either an L&S Ultra 10X with M1 turrets, or a Bausch and Lomb 10X Tactical scope

And of course this all centers around what is usually my favorite part of a build, the McMillan stock. Below is a mostly exact same stock as used on the M83, with the exception of a different butt pad (but that can be easily fixed).