I have a brand new case of Federal 9mm 115gr FMJ that I am looking to sell. The case is sealed, but I am happy to open it for the buyer before shipping if interested.

$295 shipped.

I can accept CC through my business if needed, but there is a small fee.

Let me know if you have any questions.

Ok gents, hoping some of the experts here can help me. I got into reloading a little bit ago to try and bring down the cost associated with shooting my 308’s. I found some early success with my MK316 clone loads, and figured since I already had the press and a ton of old brass, I might as well try my hand at some 5.56 loading.

To begin with - I am not looking for match grade accuracy here, just decent range ammo and something to store away. I’m using mixed headstamp 5.56 brass, 55gr Armscor bullets, Remington SRB primers, and Ramshot TAC powder, all loaded to 2.25 COAL to match M193. I’ve tried quite a few different charge weights between 24.5 and 26 grs and honestly I’m pretty disgusted with my results. I have not been able to get a single 5 shot group, suppresses or unsuppressed, through any rifle or barrel (all of which are very decent - Geissele, Rainier CHF/CL Mountain, Colt SOCOM, etc) to measure less than 3.3 MOA. Most are between 4-5 MOA.

What am I missing here? Are these Armscor bullets just that bad? They were certainly cheap, but 4-5 minutes seems terrible to me. I haven’t crimped any of them, but that’s the next variable for me to test. I’m also planning on trying to bring my OAL back in to the book minimum of 2.20 after running it all the way out to 2.26 with no improvement. For context, my Rainier barrel shoots 2.7 minute groups with M193, .75 minute groups with MK262 and about 1 minute with some cheap 77gr Reman loads.

I’m just looking for a decent range load that will print 2-2.75 MOA groups like M193 will and that will come close to it in terms of velocity. Is that too much to ask for from mixed brass and cheap bullets? If not, is it this TAC powder? The lack of a crimp? Appreciate any advice you guys have. If these don’t print I can always chew them up at the 25 yard line, but it would be nice to make something decent with the rest of these bullets and brass.

I have 2 foundation genesis for sale. Both are for right hand Remington 700 short actions. Both have the full length foundation Arca rail. One has what appears to be a badger ordnance bottom metal (the one with the black epoxy weights (weighs about 8.5 pounds) the other has a Hawkins precision bottom metal and a short actions custom 2 round holder with the clear epoxy over the weights and it weighs roughly about 8.5 pounds as well. Looking to sell them for $950 each shipped. I bought them both used but never ran them in a match because I prefer the chassis style. This is my first post
on here but can FaceTime or do whatever is needed for that. Will take Venmo or PayPal F&F

MDT ACC PREMIER CHASSIS, looking for $225, did not seem compatible with my Bergara action. See photos for wear.



.

First time posting on this site so forgive me if I’m not doing it correctly.
Barely used, great condition. Comes with soft case.
600$ shipped
Text 520-47one-8406 if interested

We have a coyote kill thread so why not one dedicated to the smaller bastards?

Here’s some ground squirrels in Wisconsin that will burrow no more…


17 Hornet





22LR CCI SV


Not sure which gun.

I am looking for some optic recommendations for my Shorty 6.5 Creedmoor bolt gun build. I’m not partial to any brand. I just needed it to be extremely durable and repeatable somewhere around a 2 or 3 on the low end magnification and around 20 on the high. Definitely want FFP I would like to be able to somewhat be able to use the reticle on the lower end of the magnification. This will be a backpack/brush gun. so again durability and holding zero is a must.

I have 2 Remington M24 Receivers for sale. Never barreled, or altered.
600$ 550$ 500$ 450$each shipped to your ffl in the lower 48.

Site has a 48 hour bump rule. You have been bumping every day. Do not bump before 48 hours again or post will be deleted and you will be banned.

Like new in the box vortex Razor gen 3. It’s as close to new as you can get. Opened the box when I got it a couple months ago but never been in rings or on a gun. The only reason for selling is I have 2 in the safe. I have an ARC m brace mount that I bought for the scope but never put it on. I’ll sell the scope for 2050 shipped or the scope and mount for 2250 shipped. Can FaceTime
anyone that’s interested to prove condition of the scope.

AW mag with dasher kit installed $125 shipped

I have 8 new in the wrap AI AW 50 5 round magazines, $125 each

Cory Trapp
Gunsite Academy, Inc.
[email protected]

- Brand new Pristine action
- 26” Preferred barrel , hand lapped, med palma.
- 25 Creedmoor chambered by TS customs.
- Threaded 5/8x24

$1,600

I also have a bunch of chassis, triggers, brake, etc if someone wants a full rifle package out of it.

Does not surprise me one bit. Seems the heat on this rocks pot is just increasing, all the time.

All prices are SHIPPED via FedEx 2-Day Air or Ground if you’re within 2-days transit time. If you want it faster, just deduct $50 and send me your own ship label. NO sales to anyone who emits any level of detectable ITAR Radiation. TRADES WELCOME in part or in whole. Just PM me offers, and I thoroughly enjoy laughing at lowballers, so fire away!

Will fill-in info and fauxtoes between today and tomorrow, but here are the Brevity Codes for the impatient (i.e. my kinda bros):

3046 FOM RPNVG Panoramic Binos with Gen2 RPO front and rear in SureShot Pelican with full faith and credit backing of The Man Himself (Jay). Have legit $13K into them. <20 hours use. Look new. $9500.

Jerry-F fusion monocular, full factory Pelican kit with mount, battery pack, documentation, etc with ~2600 FOM L3 WP done by (yet again) the object of my Bromance Desires - SSNV/Jay - have $12.4K into them. <50 hours use. Look new. $8500.

Jerry-CE5 640px COTI (clip-on thermal imager) in factory Pelican with battery pack, cables, docs, etc. Under 5 hours use. Like new. $2500.

S&B 3-27 “High Power” H37 RAL8000 legit “USSOCOM” (same model, NOT NSN marked) scope with matching RAL8000 Spuhr, in marked SB Box P/N: 669-945-372-B8-B4 — not sure what legit value is, but calling it $4000 so an overzealous Mod doesn’t boot my posterior for a TOS violation. It may be worth less (probably) or more (wishing upon a star). Make me an offer or send me a 5-gallon pail of certified CAG urine and it’s yours.

ANVIS-9 full kit (mount, pack, cables) Omni-VII GPs. Very clean tubes. Inspected, cleaned, purged and collimated in 2022. Light signs of use. Very subtle edge shadow in one tube where it looks like a ring may have shifted (or something) very slightly. Not visible during use, but Certified White Wall Inspectors with impenetrable sphincters will likely notice it, so $3000 out-the-door.

Standard payment options available. PP, Venmo, CashApp, a perfectly sculpted Blue Falcon, Commo gear, a month’s supply of hot oil massages, drone stuff, and in the off-chance someone has some Beartooth wizardry kicking around, Imma all ears.

Selling a 6mm bartlein barrel blank, 1.250 straight taper, 5R cut rifling, 7.5 twist, 31”.

Pm me if you have any questions.

Asking sold shipped

Payment via PayPal f&f or buyer pays fees, Venmo, Zelle.

Getting out of XLR sale continues...

Selling thelast TWO Envy pro chassis.

1) Tequilla sunrise cerakote that comes from the factory (i.e Viking Armament) $1075

2) Neon yellow with Neon blue accents. Cerakote job also performed by Viking Armament
$1150

What's included (same for both):
- Envy pro chassis with C6 buttstock
- 3 Internal weights
- 6 External weights
- Thumbrest
- Bagrider weight
- XL NV Bridge
- Long nose (on XLR #2)
- Timer (on XLR #2)
- Ergo Grip (or MDT Elite picture)
- Adjustable mag latch

Shipped Paypal FF

Trades
Tangent Theta 525 + cash on my end
Berger 109s

I have a 2005 Toyota Matrix that I need a little help with.
The radiator fan cycles on and off a lot. Even when the car is cold in the morning and you start it, the fan will come on for about 30 seconds then turn off. After a minute or two the fan will come on again and run for about 30 seconds. This continues the entire time the engine is running. Otherwise, the car runs and performs just fine.
Any ideas what might be wrong? Bad sensor of some sort maybe. Any help would be appreciated, thank you.

Here we go...


Interesting bit about what sounds like an active laser BDC?

The design and functionality of MILR™ is based on its ability to achieve digital laser movement within the system, specifically the infrared pointer, which internally declinates to create a ballistic solution for the shooter while under NVGs. The introduction of this first Disturbed Infrared Aiming Laser (DIAL™) capability allows for true day-to-night extended-range overmatch for weapons platforms traditionally limited in effectiveness during night engagements. Additionally, the MILR™ uses a step-through ballistic setup interface that provides ballistic computer capability to user groups not previously trained to use a ballistic solver data, while retaining compatibility for traditional long-form profile setups.

Second time I've heard about this,

Login to view embedded media

sold

Rimx action
New extractor and firing pin
Bix’n Andy tacsport pro
10 round mag
15 round mag
Sold shipped

No trades, Zelle preferred, prices are shipped.

1. ARC M10 Med 30mm Rings NIP $125
2. ARC M-Brace Mount 35mm Mount with level $225
3. Badger Ordnance 30mm Alloy Rings 306-16 NIP $118
4. Flatline Ops Articulating ACD 35mm $125
5. Flatline Ops Articulating ACD 30mm $SOLD
6. Flatline Ops Halo-X ACD 34mm $SOLD
7. Accuracy 1st ACD 34mm $SPF
8. ARC AICS 10 round 308 mags with 419 extensions and molle carriers $SOLD
8a. Triad Tac AICS 10 rd multicam carriers $40
9. Red Kydex pistol mag carriers with belt clips (3) fits M&P and others $35
10. Streamlight TLR-1 HL 1000 Lumen lights w.batteries, some clips also incl. $SOLD factory sends free inserts upon request
11. LaRue Tactical SPR 1.5 30mm Mount $255
12. Nightforce FDE 1.93 30mm 0moa Mount $200
13. Leupold 40mm Alumina caps pair $SOLD
14. Leupold 56mm sunshade $45
15. Leupold MK 6 optic package and Aadmount listed separately
16. Atlas BT-10 V8 LW17 $SOLD
17. Harris SBRM with lever $SOLD
18. Gamma VG6 Epsilon Brake 5/8x24 6.5 bore size $50
19. Atlas two screw pic rail adapter $25
20. Leupold competition elevation speed dial for MK5 $45

Selling a xlr envy pro in great condition. I have not used it in any matches or taken to the range. Might have some marks from being in the safe. Comes with the tr2 buttstock, ergo grip, long night vision bridge, 6 external weights, and medium nose piece. Chassis is ambidextrous and has not been bedded. Looking to sell for 1000 shipped obo

Even space aliens know there are only two sexes/genders:

Login to view embedded media

Hi guys So, i got a new barrel on a Ruger american 5.56. Headspace should be fine. It makes these weird powder burn marks on the spent casings around the neck/shoulder area. I havent seen something like that before. Do you guys know whats going on? The ammo is Sellior/bellot 223 factory fmj loads.

Best regards, Nico