Up for grabs, a Manners LRH long action, Rem 700 clones, carbon fiber stock in scorched earth camo with a nice, thick Pachmayr Decelerator recoil pad installed. Action screws and bedding pillars are included (no mini-chassis). This stock tips the scales at a mere 1.8 lbs (1 lb, 13.5 oz) as shown. $800 $750 shipped TYD. PP F&F or Zelle preferred.

I also have the Sawtooth extended Arca rail for this stock that improves upon the short one it comes with forward of the magazine well. The longer rail allows for greater flexibility in tripod/bag supported shooting and hitting the right balance point, especially with a supressor installed.

Looking at replacing the trigger in my long range hunting rifle. Wanting to go with the Trigger Tech Diamond. Cannot decide between the single or two stage. Any advice is appreciated.

Complete reloading setup, minus the powder. Hoping for a local sale, located in east central MN near Mille Lacs Lake, work in Maple Grove, frequently in St.Cloud, can meet up in those areas.

Dillon 550B progressive press with accessories and factory tool head. Bought new from Scheels but used for less than 1500 rounds (not joking) has sat on my buddy’s bench unused for 8 years. Prefer to sell local so I don't have to disassemble it. Have the box it came in. $420 + shipping - Sold

2 - Dillon conversion kits, very lightly used: 38/357, 44 Mag. $45 each shipped

3 - Lee die sets: .223, 9mm, 44 Mag. $30 each shipped.

0 - New 50rd Machined Aluminum Loading blocks for .223. $20 each shipped. ALL SOLD

LNIB RCBS hand primer, uses shell holders, very lightly used. $45 shipped.

Lyman 49th reloading handbook, VG. $20 shipped.

Lyman cast bullet handbook, VG. $20 shipped.

.223 brass - Box of 1500 cleaned and resized (bought this way, 99% LC headstamp) $150 shipped

.223 brass -1000 mixed headstamps 1x-2x firings some cleaned, some not. - $75 shipped

3K + .224 55gr FMJ in 500rd bags + about 400? more. $100/1k shipped. $300 shipped for all, will split up.

2500 - 9mm brass, fired 1x, cleaned, bright and shiny, in 500ct bags. $75 shipped for all.

400+ .38 Special mixed brass (uncounted) 4.75lbs. 100 weighs 1lb on my scale. Fired 1x-2x, cleaned and tumbled, shiny. $40 shipped.

Primers: Cannot ship, FTF only, cash only.

Small pistol:
CCI - 1600 + $100
Winchester - 3K @ $65 per 1k

Small Rifle:
CCI BR4 - 500 $40
Remington 7 1/2 BR - 760 $45

Large Pistol:
CCI Magnum - 499 $30
Winchester - 1K $65

Thanks!!

Posted elsewhere.

For sale, a Manners T4A Elite short action for Rem 700 clones. This stock is the carbon fiber version and weighs 3 lbs, 3 oz (3.2 lbs), no mini-chassis. Camo pattern is the elite tac swamp I believe. $800 shipped TYD, PP F&F or Zelle preferred.

A new Trump indictment will be handed down today. Trump indicted for murdering an elderly man on live TV last night.

For sale or trade, an American Rifle Company (ARC) Coup De Grace short action with a magnum bolt face (0.535"), 20 MOA rail, pivoting bolt handle, and fluted bolt. This action is brand new, never fired, never assembled and has the new extractor update included (not installed yet). It was ordered when they first became available in February 2023. I also have the action wrench for it ($100 additional). I would be willing to trade bolt heads straight across (magnum for standard) and skip all the FFL transfer hassle. Price is $800 shipped to your FFL (must accept transfer from an individual) and/or $100 shipped for the action wrench (will sell only after the action sells, preferably to the same buyer). PP F&F or Zelle preferred. Thanks for looking, hit me up with any questions.

Selling a Nightforce ATACR 1-8 with FC-DMx mil reticle. Scope is in good working order, zero issues. Some wear on turret caps but strictly cosmetic and turrets are perfect. Glass has no issues. No box.

Mounted in a Reptilia 34mm 1.7” mount.

Scope and mount $2250 shipped. PayPal F&F, Zelle and Venmo accepted.

The Supreme Court ruled 6-3 on Friday that it is not “cruel and unusual punishment” under the Eighth Amendment to remove homeless people from encampments and to imprison them for repeatedly violating anti-camping laws.
The case, City of Grants Pass v. Johnson, was watched closely by civic leaders nationwide who are struggling to deal with homelessness — especially in Los Angeles, California, where the homeless population has continued to grow.
Justice Neil Gorsuch, writing for the majority, expressed sympathy for the homeless, and acknowledged that the issue is complex and difficult to resolve. But he noted that laws against encampments were “commonplace,” and said that the Eighth Amendment was a “poor foundation” on which to mount a challenge against them. The right forum in which to debate responses to homelessness was in democratically-elected governments, not in the federal courts.
Los Angeles Mayor Karen Bass called the Court’s decision “disappointing” — although her own city is struggling to deal with homeless encampments:

Bass’s strategy is to move homeless people into motels or hotels, and bill the taxpayers — and has met with only limited success, with some people benefiting but the homeless population growing.
In April, Bass implored wealthy residents of the city to donate money for property to be devoted to the homeless. Los Angeles County is trying to replace a quarter-cent sales tax for homeless services to a half-cent in a ballot initiative.
Justice Sonya Sotomayor said in her dissent: “Sleep is a biological necessity, not a crime. For some people, sleeping outside is their only option. The City of Grants Pass jails and fines those people for sleeping anywhere in public at any time, including in their cars, if they use as little as a blanket to keep warm or a rolled-up shirt as a pillow. For people with no access to shelter, that punishes them for being homeless. That is unconscionable and unconstitutional.”


The case is City of Grants Pass v. Johnson, No. 23-175, in the Supreme Court of the United States.

Guys with Benelli M4s,

Anyone have luck shooting Fiocchi "defense" 00 buck? It's a low-er (I guess?) brass round but it wouldn't cycle through the Benelli on it's first outing. I'm not surprised since the gun was showroom new until this morning. So my question is, once properly broken in, can a Benelli M4 cycle lower power loads like that?? Most of the time it wouldn't eject the spent shells, but I only have 20 high power 00 buck through it so far.

Will the M4 gas system cycle even target loads once broken in? I wish I would have brought more high brass shells with me today because damn is that thing fun to shoot!

Have a like new lrp s3 with sunshade. It was mounted on a 22lr and took to range one time to sight in. Not a mark on it. I am only selling because i bought a Tangent Theta. I still have one of these on a rimfire. Very nice scope. Comes with everything in box as new. 1650 shipped.

UVALDE, Texas — A 10-count indictment made public Friday accuses former Uvalde school district police chief Pete Arredondo of 10 missteps that led to the botched law enforcement response to an active shooter who killed 19 children and two teachers in May 2022.

Authorities booked Arredondo on Thursday into the county jail, where he spent about 90 minutes before being released on bond.

A grand jury also indicted former school district police officer Adrian Gonzales, whose role has been less public in the two years and one month since the shooting. He had not been booked into jail as of Friday, and an indictment in his case remains under seal.

The indictments are the culmination of a six-month grand jury investigation that included months of in-person testimony, including from Texas Department of Public Safety director Col. Steve McCraw.

The officers face up to two years behind bars and a $10,000 fine if convicted of the state jail felony charges.

​

Login to view embedded media

Disgusting; and don’t ever forget this happened .
Hopefully it didn’t hinder traffic revenue.

Hey guys, I am piecing together a beater on a Solus action. I do have an origin shouldered prefit that is perfect. Today I picked up a rainier arms 8.6 blackout savage small shank match barrel. As I screw the barrel into the action I make less than 1/2 rotation before it becomes overly tight, almost like it’s wanting to cross thread. This being said, I am positive I am not cross threading. I can feel the threads properly in the thread channels. Any ideas how else to troubleshoot this specific problem?

The SCOTUS has ruled that the DOJ went too far with charges concerning the Jan 6 peaceful protest set up.

Well that didn't take very long since we were just talking about it roughly a week ago.
Kicked in the bottom line apparently.

Has anyone used a cell phone booster like the WeBoost ?

I have 5 boxes if Eley Tenex, 5 boxes of Eley Match, and 5 boxes of Eley Team. All boxes are 40 grain. They are all different lots from some lot testing I did. Purchased about 3 months ago. Trying to sell it all together so I don’t have to break it. Selling it cheap, $125 shipped for all 15 boxes.

Hello guys,
got me a new Bergara B14 Wilderness Sierra for hunting in .270 Winchester.

I´ve tried some bullets but the groups weren´t good in the beginning.
I stuck with the Nosler 150gr. BT, which seemed to have the best precision potential.

Made a ladder test and found a plateau close to the maximum powder load (what Quickload said).
Primers and brass still looking good, I began to vary the OAL.

From 6 loads with different OALs (each 5 rounds), I had two loads spreading evenly horizontal and vertical at about 1.2"ish.
4 loads had only a vertical spread of around 0.4", but still a horizontal spread of round about 1.2".

I don´t now where, but in a book or in the internet I´ve read, that a horizontal spread can be caused by a too stout load.

Can somebody confirm this, or is this nonsense?

Ruling just dropped.

Curious how this will effect things & not just the pew pew overreach.


Login to view embedded media

Hello all,

Can you please recommend the best PRS scope I can get < $1000. I have 500 yard training coming up Aug10 and I need to prepare. Please be specific with the model and brand. I am a noob here.

Thanks!

Anyone?

WTS:
**SOLD**Zeus QC short action Remington footprint. $1200.00 **SOLD**
**SOLD**Trigger Tech Diamond flat 2 stage $175.00**SOLD**
Proof Research pre-fits for Zeus QC short action:
24in carbon .308 approx 300rounds $600.00
26in steel 6.5creedmoor 200rounds $400.00 (Blank cut by SJA)
26in steel 6creedmoor 450rounds $350.00
26in steel 6creedmoor New $400.00 (Blank cut by SJA)

Chassis' for sale (Remington/clone)
**SOLD** MDT ACC ELITE blue comes with stock dampeners and two mirage shields. $1300.00 **SOLD**
**SOLD**MDT HUNT26 carbon, with folder, with arca. $1000.00 **SOLD**
KRG Whiskey 3 with VisionPRC fore end. $1000.00
Feel free to make offers.

So, I'm not a machinist, but I understand a few things in regards to how things work and why something is made a certain way, etc.. This pertains to when one would screw on a tuner, this case an ATS and you have to use the spacer and maybe another smaller one so the threads of the tuner will stay on the barrel threads. When a barrel is threaded is there a reason why there's such a large gap between the ends of the threads and the barrel shoulder? My guess is the cutter is a certain width and one is unable to run the threads closer to the shoulder? If that's not it, why is it?