DE AI ATX Short Chassis for R700SA

Medium forend bridge

AI 20 MOA action rail

$1,300 shipped

No trades.

This chassis works with 16" barrels.

Could this work well? Seems sturdy.

I have to be missing something, lol. Had my mind set on a tikka t3x CTR in 223 for my kids to shoot. Come to find out, they’re no longer available in the US. I’m too OCD to buy used. Looking for something with a heavy barrel as they like to shoot. This will be for target shooting only. I’m afraid the thin barrel of the tikka t3x lite. Will heat up quickly with them shooting it back to back. Looking to stay at $1000 or less. Checked out savage, tikka, bergara. Not sure about the qc on the new REM 700’s. I have a few older ones that rock but, they’re probably 20+ years old. There just not many options with a heavy barrel in that price point. Is there something else out there I should be looking at. Not having much luck.

What's the over/under on this happening?
Login to view embedded media

So mate is going to sell his .270 .
Hes in the market for a new rifle .
Bergara, tikka , springfield arms , savage he,s thinking .
He likes my Sako 300 win mag , and my mossberg 7mm prc . But he wants to know about the 300 WSM ....
What he is actually after is something that has the power to deliver a fair whack out to (say ) 600 mts , because my rifles can do that , and sometimes i do shoot that far . ( on his place !) But where as my rifles are full length magnums hes after a "shorter " barrell (say 20 inch ) for the roar as his new bush rifle thats capable to shoot out to 600 mts .

So, whats the story with the 300 WSM ?
cheers
les

Modified post -

Cyke Pod w/standard single pull legs from the non-lightweight version. Has the lightweight head. Comes with upgraded Short Action Precision quick adjust lever.

Everything is in like new condition.

EDIT: SOLD

am thinking about a CZ 457 their prices are best on line. not insane low but lower than avg. thus,my suspicion and question. are they legit? scam detector web sites are not encouraging and their phone # is missing the last digit. anybody got an clues?

Looking to sell my 22 inch MTU vudoo v22 360. Comes with aero solus chsssis, SRS weights, vudoo magazine/ammo case, 3 mags, trigger tech diamond 2 stage, and bore guide. Has roughly 2k rounds of SK red through it. I bought it new from Altus a few years ago. Asking $2400 shipped for everything. I don't have references here but have plenty on tacswap.

Defiance Classic action
Never been fired or had any barrels in
.223 bolt
will accept Ruckus pre-fits
$650

Vortex Gen 3 Razor
EO Black Limited Edition
EBR-7D MRAD reticle
Non Locking Elevation mod installed by Vortex

Ships in original box with:
Vortex sunshade
Vortex flip up caps
Mag throw lever
2x turret keys
Manuals
Vortex lenscloth
Obnoxiously large Vortex bumper sticker

Glass looks perfect, no mounting rings, no scratches or dings. Scope looks LNIB. Just back from Vortex for a check up, all GTG.

$old shipped/insured via UPS. PP F&F/Zelle/Venmo.


Due to scammers, you must PM me first. I will not PM you first. If someone does, they are a scammer.

EO website specs

sold, pics removed to deter scammers

Just a heads up. DNT has announced a price increase being imposed next week. We wanted to give a heads up on this and, what we assume, will be similar announcements from other manufacturers. We will honor the current pricing as long as current inventory allows.

Like New Custom 22 Creedmoor build from Wolf Precision.

Build sheet with all specs attached. Paid $4,850 for this build and asking $3,900 OBO.

Only difference from build sheet to current rifle is a swapped grip.

80 Rounds of Ally Ammunitions 75gr ELDM is all that the gun has seen.

7.4 pounds as is right now with no chasis weights.

More pictures available upon request as well as open to FaceTime etc.

They are finally here! I'm getting the sold ones shipping out to their luck customers today, these are the first 5 of 10 production models in the United States Larger batches will start flowing in soon, and the 50 or so people that have been in line for over a year will be contacted as they come in. More pictures and impressions are in coming, these models are going to their new homes today. Feel free to email [email protected] with what reticle and color you are looking for, we will contact you when your scope is shipping in. We appreciate everyone's patience and please feel free to post your experiences in this thread. - Richard

SOLD!! Hate to do this as I’ve just got it all together but unforeseen circumstances and all that….

Rifle and 6c barrel have less than 500 rounds; I also have a 6.5c barrel and a 308 barrel both in similar condition. I can’t remember the details of both but will do my best to track it down in my texts/emails from sellers here on the site.
Comes with custom fit Pelican Case, 1 brown mag and 2 black. 1 QD cup pic rail piece, HRD Gear and RRS BAX ARCA rails, TBAC Muzzle break.

Package price is $6,200 shipped CONUS. I’ve no interest in separating anything at this point. I will take more pictures tomorrow or maybe later today if it’s possible to get off work early.

Edit: pic file is too big and unsure how to correct. Happy to send via text or email. PM me.

Brand new, never mounted…need funds for something unexpected. I did open the box and it’s never left my office.
MIL-XT reticle. Comes with everything from factory.
Edit: looks like my picture files are too big. Can send via email if you like.
$2900 shipped with insurance CONUS.
PayPal or Venmo, check or MO. Can take a Zelle payment if only option available.

TS Customs 22 creed. LP Fuzion Ti SA. XLR element 4.0 magnesium chassis. 20” Benchmark carbon, threaded. Trigger tech special. It’s brand new, never fired. Just been sitting in my safe for the last year. Selling to fund another project. PM for more pics and info

Has anyone reloaded using 308 federal gold medal brass? I have access to an absolute ton of it from work (swat sniper team). It doesn’t appear to be crimped either.

Anyone with experience reloading it? Worth it or no? I don’t have a 308 barrel, but I’m debating it just to use this brass.

I have two used Piercision muzzle brakes.
1- .308
1- .264

$80 Shipped PayPal FF
No Trades

PM if interested

I have been shooting a Bergara for NRL 22 and want to upgrade to a Vudoo eventually but don't want to spend that much at the moment.... So I was thinking I could buy the chassis now and use it for the B14 for now, then get a Vudoo Barreled action later.

Not sure if that's the best plan, but seems logical while sitting here with my 1st drink of the night..

I would like to know what more experienced shooters think and then which chassis... I was looking at MPA and MDT but don't have any experience with either but I really want to look cool, even if I don't hit anything.

Up for sale is my RimX build, pre 2000 serial. Going a different route and focusing more on centerfire.

• 22” 1:16 ACE Blank, finished by Manzella with Eachus chamber
• TT Diamond single stage flat trigger
• Spuhr SICS chassis with adjustable bag rider and 6x external weights
• 1x RimX mag with +5 extension

Rifle shoots CenterX sub .3 consistently, I’ve been shooting Eley Match around .3, have Eley and standard extractors, extra tensioners and small parts as well. Rifle is balanced pretty much perfectly as it sits, I’ve shot 2 matches with this setup and the SICS is easily my favorite chassis.

Barreled action with mag only $2000 shipped
Complete rifle as seen $3500 shipped
PayPal F&F, Venmo F&F only
Rifle is truly a no excuses setup, I jumped in head first to rimfire and want to devote more time to centerfire.

Please, no trades.

…Outside?

Local coffee shop and several of us old guys have a hard time hearing each other at our table.

Some tourist comes in and starts yakking on their phone in their outside voice at a nearby table.

They get the War Chief treatment. Full blast. Works every time .

Login to view embedded media

My Native Brothers

Gee I guess if it was actually housing migrants it would have been totes worth it

Login to view embedded media

I have a left handed zermatt origin action, proof s.s. pre-fit in 6.5cm, Triggertech special trigger, acc elite chassis. Oss 7.62 hx qd suppressor. Using hornady 140gr match, h4350 (39.8gr) so not a high velocity load (2720s), cci #200, alpha ocd LRP brass about .002" shoulder bump. I will randomly get heavy bolt lift and when I do the neck of the brass extracts dented in. Thats with slow extraction so the denting is happening during initial bolt lift or during chambering but I've sat there and cycled loaded rds a ton and they never have issues so im thinking it's happening during bolt lift or something. I can't figure out what's causing the bolt lift problems with no where near signs of pressure. Ive cleaned the chamber really good and it'll be fine for a bit then it'll start happening randomly again but it'll be like one round then no issues then another random rd with heavy bolt lift. Anyone have an idea what would cause this. I just purchased a borescope and it'll be here in a day but I dont think there's anything in the chamber bc its random rounds then it'll extract fine. Yesterday I took my rifle apart so I could see in the barrel and there's wasn't anything wrong with it. I cleaned it really well and rebuild my rufle and it happened again today with random flyers. It just started and wasn't doing this until yesterday. Itll do it even with a clean barrel and like 10 rds through it. Help would be greatly appreciated.
Thanks.

I can't count the number of ways we are winning.

1. Throwing that utter POS Al Green out for being disrespectful was just awesome. I would have taken that gold headed cane and stuck it up his ass after beating him to a bloody pulp
2. Watching Pelosi not knowing what to do.
3. Watching the Democrats with their little protest signs. I bet David Hogg thought that up
4. DOGE!

List your favorites