Focusing more on centerfire and pistol matches now and letting go of the most accurate 22lr that I have ever owned. I have owned over a dozen Vudoo rifles and multiples of almost everything else.

Vudoo 360 built by Modacam with 1:13 Mullerworks 24” 1.25 straight barrel. Approx 2k rounds and an absolute laser that has won numerous PRS and long gong matches with Center-X.

Will come with 6 Mags

$xxx shipped from my FFL to yours. Payment via PayPal F&F, Venmo, or Zelle.

Brand new never fired or installed onto a upper. Not too many of these around.

18" 1:7 twist, MK12 contour barrel (will fit with a AEM5/ Ops Inc 12th model)
Caliber 22 ARC
Complete M16 Bolt Carrier Group
Craddock low profile gas block with rifle length gas tube installed.

Asking XXX Shipped for everything. Not splitting any of this up. Not in a hurry to sell. Not interested in any trades at this time.

Perfect condition. The best glass and reliability, and elevation/windage range money could buy back at the time ... a bit heavy / outdated and it is discontinued now but it is still a Hensoldt! read more about it here if you are not familiar with the brand: https://www.optics-trade.eu/us/hensoldt-zf-3-5-26x56.html

Comes with a Sphur mount and the original box. Asking for $2500 + shipping.

This thing has lived a hard life, shot out couple barrels, milled slots for carbine and patrol length gas blocks, few layers of krylon, big ass dent on the 9oclock. Same for the BCM upper. Only shims included are what I used to time it to the upper. Wrench tool included as well.

Trades welcome (73eldms, 8208 XBR, factory 108eldm 6arc ammo, proof ar barrels etc)

$300 tyd for rail, tool and upper

have 4 new in box Athlon rangecraft...need to move these on out.. $340 shipped ... wife's been remodeling too much..

Lost interest in this, craddock recce 15.1 223w barrel and KAC ff RAS long complete handguard


$700 tyd

Video title: "BREAKING: New Intelligence Warns of Complex Coordinated Attacks in America"​

Login to view embedded media

I have a 10 box case with 200 rounds available. All same Lot Number.


$260 Shipped & Insured.

Up for sale is a catch and release from the hide.

Schmidt Bender 5-45x56mm PM II High Power LP P4FL 1cm cw DT27 MTC LT in ral8000

Im just too used to tremor3, and like reticles and the P4LF is too foreign to me

I do not have the box, and there are some marks on the side of the bell housing that the previous owner tried to blend in with paint. (?).
I don't have safe queens so it never bothered me but to each their own

The mount is NOT included.

$3500 shipped and insured.

Selling brand new Proof Research carbon fiber prefit barrels. They are 24" 6.5cm for the Savage small shank, so they fit a bunch of different actions. Model number is 100097.

I had 10, but I have 6 left for sale. Brand new as shipped from Proof Research.

Asking $600 shipped

Brand new in box

Asking $2225 shipped

Up for sale are:


Barrett MRAD 308/6.5 "C" magazines.
$45 each. 120 if buying all 4.

MRAD mag pouch. $25.

AI 338lm 5rd magazine. $60

Accurate mag 338lm 5rd magazine $50

2x Kac 10rd mags with Knights armament pouch.
$225

5x EPM 30rd AR-15 mags. $80

Atlas 2011 17rd magazine. $50

Xm2010 Remington 300wm magazine. $50

AI 300wm magazine $50

18” brux barrel 5/8 threads
Origin action
Extra 223 bolt head
12.5” criterion 223 barrel
Cadex chassis
Tt primary or special will confirm later
No mag break or bipods

Will part out or sell all together

3k obo for everything

I can’t figure it out. The Copium retard in me hopes this was all planned to show the world who the real bad guys are.


Or he’s just retarded

Login to view embedded media

Game Wardens with Texas Parks and Wildlife arrested Ethan McNeely, a 39 year old Oregon transplant, yesterday after discovering him crouched in the woods below the dam at Lake Tawakoni attempting to hunt squirrels with nothing but his bare hands and teeth.

McNeely, who insists he’s “a primal predator, not a sportsman,” argued with officers that his “God-given claws and fangs” exempt him from needing a hunting license. “If I catch it with my molars, that’s between me and Mother Nature,” he reportedly told wardens while spitting out a mouthful of bark.

Authorities were not convinced. TPWD officials say that while McNeely’s hunting technique is unique, state law doesn’t make exceptions for “wannabe cavemen.” He was booked on charges of hunting without a license and disorderly conduct after growling at the officers.

McNeely maintains he’s being persecuted. “They can cage me,” he said, “but they’ll never cage my inner wolf!”




I think his 'inner wolf' is actually a Chihuahua with a severe crack problem. But I could be wrong!

Sirhr

PS. Please let this be satire. Because holy hell, my faith in humanity just can't get any lower. If this thing can be considered humanity...

Selling my RW Snyder built Remington M24A2 Sniper Rifle and AEM M24 Suppressor, and accessories.

I purchased this back in 2024, but unfortunately a potential move for work overseas and time has made it difficult to shoot this.

It has around 200 rounds through it, all of it FGMM 7.62.

It is threaded in 5/8x-24, with a 1-10 barrel twist
M24 trigger, M24 marked receiver.
MARS 0 MOA rail
Chambered in 7.62/.308

It shoots absolutely lights out, I shot a sub-moa group and I am absolutely not a great shot by any means.

Only blemish is a small white chip of sorts near the safety selector, and some normal marks on the bolt handle and chassis from normal use.

Total package includes:

RW Synder built M24A2 w/MARS rail
AEM M24 Suppressor w/original box threaded in 5/8x24
5x AI AE MKI 5 round magazines, 4 still new in packaging
Harris S-BRM Bipod with KMW Pod-Loc installed

Will NOT come with the Nightforce ATACR scope or Sphur mount

Asking $5200 shipped for everything, will ship in a Plano Hard Case from my local FFL to yours.

I am located in Albuquerque, NM so if you are local and would like to see this in person, please message me.

If you would like to wait for the new year to arrive to save on that $200 NFA Tax Stamp, we can work out the details as well.

Willing and able to drive to surrounding states if needed.

More photos/details available on request.

Thanks for looking.

Quick summary, FL2K was a race last weekend where some bad ass cars race the 1/4 mile at Bradenton, FL.
Grannas Racing's Supra was the #1 Qualifier with a 6.63@220 for the stick shift class but said he did not hear them announce
them call his class to race. He missed the race, he's pissed and blames Garrett Mitchell aka Cleetus Mcfarland (who makes some great videos on youtube BTW) who is a competitor in his class and part owner of the track. The grudge match is supposed to happen tonight around 4 eastern, and the internet has been going nuts with memes and shit talk. I hope it's a solid race with no BS

-Richard






The cars below:

Nothing is lining up. Called it a tripod and then a scope.

After sitting in my vehicle a while it looks like this and is sticky





Maybe a dry Teflon or graphite ?
Or Hornady one shot dry ?

Gen II Razor 4.7-27 MRAD EBR-7C reticle

Used for one PRS season. Tracks and works flawlessly. Has some minor scuffs from where the rings were, but no dents or deep scratches. no box, but has scope shade and throw lever.

Rings in the picture are sold but i have a Geissele Super Precision in FDE for $200 and Vortex Cantilever for $100 if interested.

Message me with questions
$1500 Shipped (scope)

I purchased a Fox Pro call from him on Sept 17th and haven’t received or heard from him. He was on SH last Sept 27th. Any help would be appreciated. Thanks Matt

What do precision rifles have in common with cars and motorcycles? Owners always want to add or upgrade things and my Accuracy International AXSR is no exception. I’ve noticed mounting the rifle in my Really Right Stuff carbon fiber tripod and Anvil 30 ballhead, the Cerakoting was rubbing off the chassis where it was clamped into the ballhead.

I sent out two dozen emails to gunsmiths and vendors looking for a solution. My thought was to mount an ARCA plate to the rifle’s chassis which had a built in ARCA rail, but the constant clamping of the rifle into the tripod ballhead was scratching the Cerakote finish from the rifle.

Gunsmiths and vendors were responding with no direct solution, so I managed to find an ARCA plate that was close, but then having to purchase four small proprietary fasteners for Accuracy Internationals keyslot mounting system. Four tiny screws cost almost a Franklin.

Why not a transparent plastic solution or tape, because it isn’t a great solution and looks tacky. Also, the anodized finish is more durable than Cerakote.

If you’re persistent enough you’ll eventually succeed. Matt Yore of Sawtooth Rifles responded just after I ordered my workaround solution with a part that is exactly what I was looking for. He makes an ARCA rail that fits perfectly on my AI AXSR rifle with his ARCA rail coming with the necessary proprietary fasteners. The parts are being finished and sent out to be anodized, I’ve asked if I can get “Sage Green” to match my rifle.

So, like my motorcycle and car enthusiasts, I’ll have a few more things to add to my shelf of ideas that were close or sounded good at the time, but looking forward to getting the perfect part. Matt’s ARCA rail also has stops to prevent the rifle from sliding out of the tripod mount, cool!

All items are unfired Zermatt TL3 SA with an 18in Proof Carbon Sendero profile barrel, chambered in 22ARC. FFL must accept from an individual, no muzzle brake or stock included, this is only for the barreled action.
$2,150 shipped