New 20” 6.5CM 1:8 Sporter Fluted Prefit for an Origin or Aero Solus. Bought it while I was waiting on a barrel to be spun up and never got to using it. Markings are for Stag however Aero is the manufacturer. $350 shipped PayPal FF.

Sticky note in the picture is for cross posting on r/GAFS.

Looking to sell 2 shorty stops. $115 for both. $60 each. Would consider a419 bag stop and cash.

-Brand new in box Area 419 Hellfire match for sale
-Black Nitride
-6.5 caliber, 5/8-24 adapter included
-Price $150 shipped.

Looking to Re-home these three bipods not getting enough use… One Sold, ONE Atlas Cal with RRS Pic/dovetail lever release clamps and one Atlas PSR with leg extensions, round spike feet and RRS lever release clamp…
Cal 275 TYD OBO
PSR 350 TYD OBO

I have several new muzzle brakes up for grab.
APA Little Bastard gen 2 6mm SOLD
APA Little Bastard gen 3 6mm 90tyd
WTO MK2 self timing brake 75tyd

Brand new MDT Ckye Pod Gen 2 double pull with BTC and gray ops inc mounts. Also includes brand new MDT carrying case

Asking $675 shipped to you for it all

Excellent condition L3 CNVD Green phosphor PVS-24. I bought this to use on my mk12’s and ended up selling those so this has been just sitting in the safe for years. Works 100% with zero issues. These are exceptionally built units and never go bad.



Paypal or zelle

$4000 shipped

So looking into upgrading a 4 gang meter so we will need to run new conduit to replace the one from 1964.

I'm looking at options and am debating either renting a walk behind machine or buying a smaller 14" saw.

Has anyone used the HF pull saw?

What should I be considering?


The similar makita is dry cut only

I'm curious about the level of preference for AW mag compatibility here on the Hide.

Do you place importance on an action being compatible with AW mags?

Do you consider AW mag compatibility to be a requirement for any of your action purchases going forward (assuming you intend to use DBM for said build)?

What in particular do you like or dislike about AW mags versus AICS mags?

A case plus some of the Federal 168 SMK. $250 for case or can do $26 a box of 20. If you buy a case and want more boxes I would discount additional boxes to 22$ a box after the initial case.
Buyer is responsible for knowing state/local laws. Will not ship to CA, NY, NJ, MA, CT, DC, or anywhere else restricted.”

Protect all criminals no matter what! Pigs!

Login to view embedded media

Vudoo 360 22lr Ace 20” barrel. $1600 shipped for barreled action no trigger. Can add Timney trigger for $150 and Greyboe Ridgeback for $400. Can add Leupold MK5HD 5-25x56 PR2-MIL in ADM Recon mount for $1650

I have data on lot testing I can share with the buyer. I’ve got another project I want to get started on and one of these needs to move before I can. Feel free to make me an offer. I have FaceTime or phone call with someone if they are interested.

Knight's Armament Lightweight Match with 20" Mk11 Mod 0 barrel. Used but in excellent overall condition. 20" 5R Obermeyer match grade barrel. Vero Beach marked rail and lower receiver. 2 stage Knight's trigger. Front and rear sights included. Bolt is serialized to this serial number and one other (not sure why). Serial number falls directly within military Mk11 Mod 0 serial range. Comes with operator's manual, surplus Pelican 1700, three 20 round mags and one 10 round mag.

Asking $10,000 shipped to your FFL where legal. Electronic payment preferred, but I am flexible. No trades.

Two Mk11 kits in this serial range have sold recently for $44,063 and $52,875 at Rock Island.

My daughters love to shoot.
Rockin' a dress and a rifle


Shooting Italian cucumbers at 150 yards with her Winchester 1892 in 357 mag

Here are several ai at/ax skin pieces.

2x dark earth grip panel sets
1x dark earth buttstock panels (folding models)
1x dark earth pistol grip
1x pale earth pistol grip
1x foliage green buttstock panels (folding models)
1x foliage green forend


Selling as a lot as I no longer have a chassis.

Hard to find.

$120 shipped

Paypal or Zelle

As first class brisket smoker.

11 pound brisket. Thawed by Thursday evening, I rubbed my meat. I rubbed it really good. Spice Hunter Cowboy


So, Last night, I put in on the Char Griller charcoal grill with side firebox. I had a fire going in the firebox with chopped mesquite wood. Smoked really slow for about 7 hours then set in a cold oven. I had am aluminum pan with water in it in the main chamber.


We have had that 13" x 9" roasting for more than 30 years. It's one pan big enough to fit my meat in.

As always, total strangers from this awesome community step forward and offer whatever assistance they can when needed. I can’t begin to describe how blessed people have been because of your generosity over the years. This isn’t everything but some of the more notable ones.

1) new projectors for my old church I grew up at: they were able to purchase and install brand new projectors and screens as they updated technology in the church. A donor heard about the sale I was having and matched what put in and you guys donated.

2) my friends dad, Jeff, had emergency Brain surgery when they discovered a brain tumor. Although he ultimately passed away way too young at 61 years old, the surgery bought him 7 more months with his family. They greatly appreciate you guys and the way you helped regardless of having no idea who they were.

3) my friends kid was able to attend the special needs camp this summer. He is a young boy who has an amputated leg below the knee and was absolutely ecstatic he was able to go to this. Thanks again!

4) my dog had his stomach flip and I had to move some stuff because I was trying to close on a house this week and my lender would panic if I dropped 8k+. My sister offered to cover the surgery and let me pay her back after closing. I had several members offer to just donate to his surgery without even buying anything. I really appreciate the gesture.

Had this built by misery customs last year and it’s an absolute hammer. Shoots any factory ammo through it sub moa but favors the 108eldm. I’ve had great luck using the aeromatch 105 and sierra 107s for hand loads. I’m asking $2800 and willing to sell the surefire 65 socom as well. I have shot exactly 523 rounds through this rifle and have a log book. This sale does not include the scope, bipod, muzzle brake or suppressor unless added for an additional price. I have 520 rounds of factory ammo that I can also sell if you’re local to Plymouth Wisconsin along with starline and factory brass.

Zermatt TL3 branded by misery customs $1,300

Krieger 16” 1:7.5 twist M40 profile barrel $800

Manners night stalker with mini chassis with bedded recoil lug $1,345

Badger M5 bottom metal $294

2 MDT 12 rd 6arc mags $180

Trigger tech special flat face single stage $220

Total in parts not including labor $4,139

I will not part it out or trade for anything. I will ship individual to ffl unless you want ffl to ffl. I can provide feedback from other selling sites and also do FaceTime calls to go over everything.

So…anyone who lives in or near our Nation’s capital knows what a shithole it is. National chain stores closing due to thievery, even after locking merch behind glass. 12-14 year old juvenile’s committing ARMED car jackings. Homeless derelicts camping in front of the White House. Drugs proliferating the population. The criminal justice system of the city turning a blind eye to repeat offender and releasing them back into the community.

So the President says we are gonna FIFY! Sends an influx of federal law enforcement to the shithole. Arrests go up by the hundreds. Turds getting locked up left and right. Carjackings drop overnight. Curfews enforced.

And what does the population do? Thank you Mr President? We are so glad we can move about our city and not fear being innocently gunned down? The city looks cleaner and we can be proud to live in our Nation’s capital?

Fuck no! We protest! We denounce your improved living conditions! You are unfairly targeting our shithole population. We can no longer roam about and rape, kill, steal, get high like some third world shithole country.

Not to worry though. Even if you catch us, our liberal judges, prosecutors, defense lawyers will let us back out so we can continue the legacy of our shithole city.

What the actual fuck?

Solus Action with a Keystone 18" 1:7 6gt barrel (stainless) Hammers with 105 Bergers + Varget.

$1100 shipped (no muzzle brake)
+$175 to include the Timney HIT trigger

Keeping the ATX chassis. Varget pushes 105 Hybrids at 2750fps in Alpha brass with great results.

Have a Bravo KRG (ODG) with an NVG bridge if you want to add it for $450.

Less than 500 rounds on the barrel and action. Only selling to shoot my ATX more.

Just bought a really early Brea USO 3.8-22 front parallax USO scope... It's in Mils (But marked 1click = 1cm at 100Meters, which is a really, really early USO marking for mils. Before folks were even calling Mils... Mils.)

This has a Horus reticle that is gradiated out to 4,000 meters!!! Crazy! The 100 meter 'sight in' position is so far up in the scope that there is barely any field of view above it (that is at 22 power... it's a bit better at 10x). But 4,000 meters on a Horus? What was this being set up for c. 2001 - 2004 or so? Only thing I can think of is a McMillan TAC 50 or an M82 Barrett? Maybe a Cheytac?

This is going to go on a structured barrel .300 Norma Magnum... so the reticle is actually useful in a modern sense.

But what on earth was Horus or JBW2 Thinking 20+ years ago when they created this scope? I can't think of anything then 'except' maybe a .408 Cheytac, a BMG or a couple of outliers like a 20mm Anzio?

Inquiring minds want to know! Anyone got any ideas?

Cheers,

Sirhr

Like new condition. Only had about 50 rounds with it.

$1100

Hello there,

SOLD $170 Area419 Match Scope Rings 3424 - Like brand new Area419 Match Scope Rings. 24mm height and 34mm tube. These rings sat in my storage for many many months. I finally got around to mounting my S&B but the bottom of the erector assembly touches my rail. My loss is your gain! These were never torqued down, only mocked up with fingertip pressure.

SOLD $30 Area419 Send iT Level Adapter for Area419 Mounts - Brand new but packaging opened. Never got around to using it.

SOLD $165 MDT LRA Send iT MV3 Anti-Cant Level - Brand new but packaging opened. These sat in my parts bin for many months. Tried to mount it on one of my setups but couldn't get a right position since I'm left handed. Both work perfectly!

$50 MDT LRA S90 Bracket for Send iT to Sphur Mounts - Brand new but packaging opened. Never got around to using it.

Prices include shipping and insurance via USPS, can offer discounts when items are bundled

Payment via PayPal F&F or you add the fees. NO TRADES AT THIS TIME.

So I just got an e-mail that Palmetto Armory is selling an H&R M14, what would make it more valuable that a Springfield Armory M1A?

Black 16" Forend AICS AX Chassis

Includes ESD Sling with QD Swivel Studs
And
Harris 6-9 Swivel bipod, converted from M-lok to KeySlot. Outstanding solution, contact is perfect, locks up super tight.

$1,400 shipped to lower 48.

Paypal preferred, message/comment any questions.