Why are they all so tiny?
Doesn't this cut the light in a huge amount?

I've got a supposedly used (never by me) Manners PRS1-T in altus badlands camo with a SAP 2 round holder. I bought on here a while back with the intention of using it but ended up trying something else instead. Barrel inlet is MTU and action is remington 700 SA.
Lemme know if you have any questions.
Asking $1050 shipped

In a perfect world, we squeeze the trigger and our game drops instantly, but that doesn't always happen. My 2 go to cartridges have always been the .308 Win and .270 WSM and I've never had a problem with either of these. So 3 seasons ago, I bought my son a Remington 700 in 6.5 Creedmoor and we're still both on the fence as to how good of a deer round it is. We typically hunt creek bottoms and hardwoods, so if a deer runs, a blood trail becomes a necessity. He's now harvested 3 bucks using 2 different bullets with the same result on perfect broadside shots, little to no blood trail. The bullets used so far are the Berger 135 Classic Hunter and a Sierra 140 GK. Luckily, none of the deer have gone very far and all have been recovered but, this definitely doesn't inspire confidence.

Coincidentally, a few of the guys at our hunting camp have been complaining about the same thing, phenomenal accuracy, but little to no blood. So I'm curious as to what you're experience has been with the 6.5 on game and if there's another bullet out there that I should be trying. Thanks.

Hornaday 147 eldm x4 30$ each
Hornaday 6.5 creed die set 50$
82 pieces of Winchester 22-250 brass 70$
Winchester 10mm brass new 40$
Hornaday xtp 180 grain 30$

Never thought Id see the day...

Leupold Mark 5HD 7-35-x56 FFP, PR2-MIL scope for sale. Comes with the box and everything from factory.

$1,650 for just the scope (Shipped) You pay for insurance if you want it.
or
$1,825 for the scope and Hawkins Heavy Duty Rings. (Shipped) You pay for insurance if you want it.

I have a set of New Hawkins Heavy Duty 35MM, 1.15" rings for $160 each. (Shipped)

Have one set of American Rifle Company 35MM, 1.10" rings for $125. (Shipped)

PP F&F or you pay the fee's.

Curious if anyone running Proof barrels on their gas guns have run into the gas ports being undersized. So far I'm 2/2.

I purchased a Proof stainless steel 24" 6.5 Creedmoor barrel for my large frame AR with a +2 camgas system. Out of the box, accuracy was amazing but it wouldn't lock back on last round. Typically I align my gas block by putting in a borescope and visually confirming that the port is aligned with the gas block. After quite a bit of trouble shooting buffers and such I sent it out to a buddy that's a gunsmith to open up the gas port. Problem solved. Took it out to the range today and it ran flawlessly and maintained the accuracy from before.

In the mean time, I had also purchased a second stainless Proof barrel that was an 18-inch 223 Wylde with a rifle length gas system. Lined up the AGB with borescope and brought it to the range with me today. It would cycle, but wouldn't lock back on last round. Checked again when I got home with the borescope and it lined up. Seems this barrel needs to have the gas port opened up as well.

Anyone else see this issue with Proof AR barrels or is it just me doing something wrong?

Here's a video clip of the borescope footage:

Looking to trade my GAP-10 for a scope. It's a 308, all FDE, Bartlien 22" Fluted barrel. Excellent condition. Roughly 600 rounds fired. Noveske switchblock, geissele trigger, surefire brake. Scary accurate. Can come with or without the Vortex Razor 5-20 EBR-3 mil scope.

Looking for a ZCO, Razor gen 3, S&B, ATACR or other scopes in that category. Possibly a Leupold MK5 or NX8 + cash.

I have a GAP-15 on the way that I need glass for, decided to sell the GAP-10 for that.

Fellow Hide Members,

I am getting out of the 6mm game so I have 500 Berger 105 hybrids that I would like to sell.

$sold PayPal (friends and family only), Zelle, cash, or good ole snail mail.

Thanks,
Jay

Fellow Hide Members,

With another surgery planned on for 29 July my shooting days are numbered. So instead of this beauty sitting in the safe I figure someone else could enjoy it.

Action: Impact 737R
Barrel: Barlien M24 26” 5R 1-8 twist chambered in 6BR
Stock: Foundation Centurion Dark Distressed with arca
Bottom metal: Hawkins M5
Muzzle break: Impact ACE break
Trigger: Timney Hit flat (can switch out to a TT Diamond curved for an extra $100)
One Magazine
Gunsmith: Joe Walls

The rifle has less than 100 rounds down the tube.

Sold FIRM shipped and insured. Payment PayPal (friends and family only), Zelle, Check or Money Order

I do have all reloading supplies you need that I will/can sell with the rifle.
Redding dies
Brass
Berger 105 hybrids
CCI 450’s
Varget

Trades:
Minox MR4 reticle (cash on your side)
ZCO 527 MPCT2 (even trade)
Dual Sport motorcycle (I will have to just polish it until I heal from my surgery) (cash on my side or I could add a Minox scope, and reloading supplies for a true turn key rifle)

Thanks,
Jay

Change my mind

On the topics on point

On result’s unassailable

In debate VERY hard to debate

On virtue, Owen’s is actually black, her great granddad was slave and rised up and bought the land he was a slave on, as I recall, VS unlike the slave owning Indian Harris

Hey guys,

I just thought I’d check the temperature and get opinions here. I did search some other threads with some success, but haven’t found quite what I’m looking for.

I have a defiance medium ultralight action/ Mag BF. I just picked up a 24” Bartlein 6.5 blank (7.5t). I’m trying to settle on the best cartridge for my setup and needs. My goal is to build a long range hunting setup and I may do some non-PRS comp’s. I don’t believe I would shoot past 1200-1300 yards with this setup. Based on my setup I believe I’m limited to a COAL of 2.950ish. I do hand load and would likely never buy factory ammo.

Three cartridges that come to mind for me are the PRC, SAUM, and Sherman Short. I’m not AS worried about the 100~ fps difference between them, I’m much more worried about feeding and bullet selection.

With the PRC I love the industry support. But it does seem I am realistically stuck with 140gr class of bullets due to COAL restrictions. Maybe that’s not a huge deal? I am just attracted to the high BC of 150g+ pills.

With the SAUM it looks like I MIGHT be able to run 156 EOL’s with certain sacrifice to case capacity (any experience out there?)I do have a set of Redding bushing dies for this cartridge as well as lesser desirable brass. Realistically I would still be purchasing ADG when available. It is a little bit of a Debbie downer that brass isn’t readily available.

The Sherman Short looks like a great option with having a shorter case with longer neck. I picture running longer bullets being much easier due to the case. My concern is potentially needing to push higher pressure to ballistically compete? At $2+ per case I’m not too excited about the idea of getting 2-4 loadings before toasting brass. Also a Debbie downer with brass being incrementally available.

I would greatly appreciate some insight here, especially from first hand experience. Thank you in advance guys.

Looking for recommendations on a chassis. Currently looking at an oryx. Anyone have any insight? Good,bad? Thanks

I live on Florida's Treasure Coast and the nearest range with the longest yardage is 100 miles away for 600yds and I have to qualify at 300yds with a specific rig for 2moa before being approved for one of their (16) 600yd shooting stations....is there anything better available?

Why don’t we talk about having our sons have this done when they come of age, this eliminates the need for abortion, the whole damn topic, fixes MANY issues in our society, is easily reversed when they want to have a kid, also costs under $5 and lasts years.



Oh right, because we need the blue and red idiots to fight each other over something that could be a non issue across the board.

Not to the benifit for pharma and their BS birth control they sell for MUCH more

Bad for the gov and corp who need a steady supply of stupid people to work at Walmart, and bad for politicians who need a supply of cannon fodder

If you let this ruling take ANY attention from the people who should be hanged Nurenberg style for destroying the world during “Covid”, from the people crashing economies and lives with their fiat money and overtime running money printers, money laundering BS human trafficking combloc Ukraine shinagans, and constant attacks on our individual liberties, you are behind the 8 ball my friend

I will preface this... I would like some "Forward Looking" comments.
I was told by one of my upstanding local Sheriff's Deputies "we are living in changing times". He was very businesslike and represented his department well. Actually a K-9 unit.

Every neighborhood / community has one "Village Idiot". IDK if it's a person who just wants to piss off the residents. A guy who does not realize he is pissing people off. Or a guy who wants to incubate a "reverse call" to the local LEO because someone complained about his activities.

To date, there is no law, statue or covenant against his activities. No noise ordinance in the county. He's the guy who, at 2 am decides to go out and check the non-suppressed coyote rifle using his new NOG's. The guy who just finished the rebuild on his Harley with drag pipes and needs to run through the hood just as your wife with a migraine dozed off at 11 pm..... The guy who likes to lay rubber at the nearest stop sign at 5 am just to show the neighborhood he has a job and goes to work early.... You know, "that guy".

Changing Times - No, you can't pepper his tailgate, pour sugar in his gas tank. He has more rights than you.

Comments ?

200-130 Bergers .264

100-140s .264

$120 tyd obo

For sale is a factory Remington Long Range .300WM (similar to the Sendero) in a MK13 Mod 5 chassis, included is a Badger rail and 3 MK13 mags. SPF sold to a friend locally

The scope, rings, spigot and bipod are not included.

I might consider some trades.

What am I legally required to carry with me when I have my suppressor? Do I need have keep a copy of the paperwork / tax stamp with me at all times when I have the suppressor with me?

Are there any potential legal issues traveling out of state with a suppressor?

I just picked up my first cans and never looked into this.

Thank you.

Selling my BA Comp Chassis for R700 SA. It’s a folder as well as ambidextrous. Comes with everything you would normally get from the factory:

Enhanced bag rider
Standard bag rider
2 round holder
Recoil lug barrel nuts
Action screws

Has normal battle scars from about a year of match use, but function is perfect. Let me know if you have any questions. Thanks for looking!

$1000 Shipped

I’m wanting to get my son a 6mm creedmoor for long range targets and whitetail deer.
Has anyone taken deer with one? What ammo did you use and how did it perform?
I know the cartridge is plenty adequate for deer. His hunting shots will be under 200 yards. Most will be under 100 yards.
My main concern is penetration and blood trails. We hunt in very thick brush. Without a blood trail it’s nearly impossible to find them.

Selling a like new Two Vet (The Kit) tripod with Sunwayfoto FB-52NN Ball Head SOLD...

DI Precisions is pretty new to the hide so we would like to introduce ourselves. We build custom precision 22s to your specs, barreled actions or complete builds.

Our most common choice is MTU or straight taper 22-24in threaded for a EC tuner. We ship these rifles to you tested and verified for accuracy and functionality.

We also offer the Lapua testing facility as a option. When the rifle is verified at our facility we will ship it to Lapua and have ammo tested in it to give you a even more accurate combination. Once we pick the best lot number of ammo - you will have the option of buying between 1- 5k rounds.

Www.diprecision.com
You can reach out to us online or call our shop at 979-421-9756 - ask for Derek or David.

Brand new in box, unfired. Factory new with all accessories. Price is $3200 delivered to FFL of your choice. Will ship from FFL to FFL. Due to WA state mag limits, I'm only wanting to sell this outside of WA state.

Not looking for any trades and the price is firm on it. It costs my FFL $100 to ship with full insurance even using USPS Priority Mail, and I paid $3270 MSRP, so $3200 is lowest I'll go.

The pen didn't stand out too well in the pics but if you zoom in a bit you can see my username on there.

EDIT: hey guys if it’s not listed in text below, then the item has already been sold, thanks for looking.

Updated 06/24/22
Email or text, don’t check IMs often
760sixonethree6076
PayPal FF or GS +4% or Venmo
Shipping included
No trades
Open to reasonable offers
Atlas Bipod BT-10 LW-17 V8 with metal feet and rubber feet - $230

Bipod2

Bipod3

MBM Beast 4 Muzzle Break 6.5 creedmore 5/8x24 threads -$70

MBM1

MBM2

AccuShot BT12QK Standard height rail monopod

• $75

AccuShot BT08Qk for accuracy international - $120


Monopods

KKM Precision glock 17 barrel Gen 3 with recoil spring assembly

• $100

KKM

Side Shot Cam Phone Mount
-$100

SideShot

Precision Rifle Systems SSP-1
-$35

Precision Rifle Systems CNC Aluminum Head with Velcro
-$35

PRS

Rock River Arms Carry Handle sight with rail - $90

RRA

Unknown brand scope ring - $15

Scope Rings

US Optics Scope CANT Device - $65
2xVortex Scope Level - $23ea
Sniper Tools Design Co. Cosine Indicator - $100
Level, Cosine Ind

ManFrotto 322RC2 Grip Action Ball Head - $100

Manfroto

Versa Bipod - $65

Bipod

US Optics Sun Shade ARD for 44mm Objective Lens - $50

Kill Flash ARD for 30mm Objective Lens - $50
Kill flash

Kestrel 4000 Pocket Weather Tracker. Comes with pouch and pictured tripod. $90
Kestrel

Etekcity Infrared Thermometer Lasergrip 1080. $15

Midwest Industries Front sight $40
no-name RBUIS $30
Pic

Air flex combat knee pads $20
Pic

Wiebad Pump Pillow $50 shipping not included
Pic

Made in Great Britain SLing British issue sniper rifle sling $25
Pic