Schmidt and Bender 5-25x56. .1 MIL adjustment. Glass is mint, faint ring marks. A few finish marks as pictured, nothing major (see pictures, I am very thorough in describing and visualizing what you are purchasing). Original box, manuals, everything. Comes with Tenebraex covers. Tracking tested 100 percent.

$2750 - shipped and insured. Will accept Zelle, Venmo or PayPal Friends and Family, otherwise buyer covers all fees. Certified check also accepted (funds will clear before shipping).

Face to face in the Austin, Texas area. Let me know if you have any questions. Not considering trades unfortunately.

I’m going to build out a G17 that I can use for competitions. I’ve got a Zev slide on the way cut for a red dot and a new barrel.

Where I’m not finding a ton of info is what internals provide the best bang for the buck?

The comps I’ll be running this in are run and guns so I need to keep it reliable when it gets dirty, wet, etc. with that in mind I’m probably going to keep the stock trigger. I already run a (-) connector and I’ll do some polishing of the internals.

What about tungsten guiderods, lighter recoil springs, etc? Where would you start and what’s going to make an actual difference.

Brand new Impact 737R S/A RH 308 BF with AI cut $1300 shipped.

Cause it wasn't me.....

US Army Grounds Entire Fleet of 400 Chinook Helicopters

The US Army has grounded its entire fleet of some 400 CH-47 Chinook transport helicopters after engine fires broke out on a few of them, a spokeswoman for the service said Tuesday evening.

www.bloomberg.com

Glad some people are because I think it's good that we have a well armed citizenry. I'm not into boats either because they seem to have too high of a maintenance cost compared to the use a person gets from them. What are you not into ?

I need to move the last of my inventory within the next week as I am shipping out to a new location due to my job. Send me an offer for any of the following items. Only trades are powder, and 300 PRC LH action, 300 PRC barrel. All items are NIB except DBAL D2 which was used as a demo item for display.

Send me an offer for any of the items.

Steiner items eligible for rebate.

Steiner S35 - SPF
Steiner H35 - SPF
Steiner M8Xi 1-8 Coyote Brown - $1700
Burris BTS35 thermal scope - SPF
Burris BTC35 Clip on thermal - $2000
DBAL-D2 - SPF

Sounds like parasites looking for a settlement.

abcnews.go.com › US › boxer-george-foreman-allegedlyBoxer George Foreman allegedly sexually assaulted 2 minors in ...​

A lawsuit filed in California alleges that professional boxer and former heavyweight champion

Excellent condition. Just came back in today from a checkup/service @ ZCO. Moving on to try out a TT. A couple small marks show on the underside.

Comes with the flip caps and sunshade and all original stuff.

$3,650 SHIPPED & INSURED to CONUS
**No Trades**
***SOLD***

Decided to go another route ..... selling my new Dead Air Sandman S under F3

Looking for $625 shipped

I'm a long time handgun shooter trying to get into shooting precision rifles on a budget. I'd like to put something together to start working on fundamentals in a higher caliber than my current .22 (I own a Savage FV SR .22 in a Boyds Pro Varmint that I've been using to get started in shooting rifles). I think I'd like to go .308 and have been looking at a few options. Ideal budget for the action, barrel, stock/chassis and scope is ~$1500 total. I can upgrade some things later.

My local range currently only goes out to 100yards but is expanding in the next year or so to go out to 400, or perhaps a little more.

OPTION 1: Tikka T3x lite compact (~$700) put into a KRG X-Ray chassis (~$550). Scope TBD...
- Downside: this doesn't have a "heavy" barrel. Is that much of an issue?

OPTION 2: Savage 110 Magpul Hunter (~$900). Scope TBD
- This is an "easy button" option, but I'm not sure how much fall off there is in terms of quality & accuracy from the Tikka to the Savage 110?

OPTION 3: Howa 1500 barreled action (~$450) in a KRG X-Ray chassis (~$550) or Magpul Hunter (~$250).

OPTION 5: Remington 700 Magpul Hunter factory build (~$1k). Scope TBD.

Any thoughts on the relative merits of these options? I don't really want to get into major gunsmithing and I'm hoping getting the action/barrel into a chassis is doable for a novice. I also have lots more research to do on optics (Vortex options vs. Leupold, etc. for my application).

Suggestions?

I don't believe the FBI raid was an isolated overreach but what is the groundwork of a sinister plan by the illegal regime and they will attempt to arrest or prosecute Trump soon to keep him from running again.

Trump and Lindsey Graham say if Trump is arrested there will be riots. I doubt that. At least not by Trump supporters but by a lot of glowies and their MAGA hat wearing Antifa flying monkeys.

https://www.mediaite.com/trump/trum...be-riots-if-the-former-president-is-arrested/

Trump needs to announce his run now to make it official they are persecuting a political candidate, because thats what they're doing.

It looks like a nice value. Two barrels with a quick change system for $2900. I’ve been reading about this thing for years, was surprised to see it finally released.



https://www.larue.com/products/larue-siete/

Post your results of 223/556 hunting here for us to learn from.

Pics are appreciated.

Post....

Animal shot:

Area hit:

Distance:

Bullet used:

Muzzle velocity:

Weapon used:

Terminal effects observed:


Also, if you have a long history of using a certain bullet, please let us know how it is working for you.



NOTE to FUDDs:

This is not your thread. Do not preach to us about how anything less than your glorified "thuddy-thuddy" will fail to kill game ethically.
The world has proved you are wrong. Go Karen somewhere else.

Will include zco rings. I can txt photos if interested.

I know there has been discussions about the 2 bullets and one of the biggest issue is the cost of the A-tip. I noticed today that the A-Tip prices have dropped a lot and is now close to the cost of the Berger at least for a .338 300 grain.

I have been using the Berger for awhile now and wonder if there is any benefit from jumping to the A-tip. Anyone with real world experience with both and provide they opinions would be appreciated?

looking to sell my 5-25 F1 Mil-C. Purchased off here awhile back now, it’s been home on my Dasher has been shot out out to 1200 yards multiple times and have never had a tracking issue. I’ve tried to show any and all damages in the pictures. Ring marks may be there not going to take off till it sells or serious buyer wants pics but it’s in ARC rings and haven’t had issues in the past. No box or paperwork (didn’t receive when I purchased it) but has the caps, sunshade, beauty ring and cap for wind. Asking $2375 buyer pays ride!

I have a slightly used Leupold MK5 7-35 FFP MIL in PR2 reticle. A few scratches on the exterior. Comes with Leupold 35MM Rings, box and all things that were originally included. I bought this scope for LE sniper school last September. I've now been issued an actual rifle so my personal bolt gun gets 0 use. I currently have no feedback as this is my first time posting in the for sale section. Current LE with morals and character. $1750 shipped. Can take paypal or cashapp. Can be contacted by phone through PM for any further pictures. Only trade is Chinese underfolder double spiker, can add cash depending on what it is.

I'm in a conundrum - through a series of fortunate events, I've been able to get ahold of two really nice short barrel uppers - a Daniel Defense Mk18 upper with 10.3 barrel and FDE (well DD's version of it) RIS II quad picatinny handguard as well as a Geissele Super Duty 11.5" all black with MLOK handguard.

Some things to be aware of, will mostly be shot suppressed and will be outfitted with NV gear - Steiner OTAL-C and Luna ELIR-3.

I am leaning toward the DD Mk18 but I am not a huge fan of quad rail handguards though it does make it convenient for mounting accessories.

For those with experience give me your pros and cons between the two. I don't think I can go wrong with either but thoughts would be appreciated as I may not be thinking of something fairly obvious to others....

ETA: Everything listed, and a few others, will be going to a local auction house. When I do that, optics will be split from just about all rifles, so if you want a rifle without the scope, or just a scope, it's an option.


Priced to sell!!

These are all personally owned.

Pics are available for everything, there are just too many to post.

Factory Rifles

LaRue PredatAR 5.56 18" YHM Phantom mount, MBT-2S flat $2,100.00

LaRue LT-7.62 (tOBR) 16" YHM Phantom mount, MBT-2S, includes toolbox & rollup pouch. $3,900.00

LaRue Costa Special Edition #303, ZCO 420 MPCT 3, ARC M-Brace 1.5" 0MOA, YHM Phantom mount, ACS, $8,000.00 Without optic & mount $4,000.00 Sold. Scope/mount still available. Sold.

LaRue LT-10 FDE Heavy, Special Edition #303, FDE S&B 677-911-922-90--68* MKM caps & throw lever, LT745 VFZ 20 MOA, 260 barrel installed 22", PRI Gasbuster, YHM Phantom mount, USO level, H4 buffer, Timney AR Targa 2-stage $8,000.00 Without optic & mount $4,000.00 Sold. Scope/mount still available.

LaRue LT-5.56 (tOBR) 16" Tango4 6-24 Dev-L MRAD, LT204 YHM Phantom mount, MBT $3,300.00 Without optic & mount $2,600.00

LaRue LT-15 FDE Special Edition 6.5G 18", Meopta Optika6, 3-18x50mm FFP RD MRAD Illum., 653574, LT204, PRI Gasbuster, YHM Phantom mount $2,900.00 Without optic & mount $2,100.00

LaRue LT-15 Black & Tan, 5.56 16", Trijicon AccuPoint 1-6 Ger. #4 green, LT104- Unfired $3,000.00 Without optic & mount $2,000.00

Rifles with Factory Uppers

LaRue LT-15 18/13.2" Stealth upper, Trijicon Accupower 4-16x50, YHM Phantom mount,PRI Gasbuster, UDE Furniture, MBT-2S $2,850.00 Without optic & mount $1,650.00 Gone to auction

LaRue LT-15 18/13.2" Stealth upper, US Optics TS 2.5-20x50 MGR, LT104, RATT, APEG, MBT-2S flat, Strike Ind, c/h, YHM Phantom mount $2,850.00 Without optic & mount $1,650.00

LaRue LT-10 6.5C 22" Ultimate Upper, Trijicon AccuPower 4.5-30x56 FFP MOA, LT745-20MOA, PRI Gasbuster, YHM Phantom mount, USO level, H4 buffer, Timney AR Targa 2-stage $3,750.00 Without optic & mount $2,000.00 Sold

Pistol/Factory Upper[/size=4]
LaRue LT-15 Original MBT, Ergo, 12” Stealth upper, YHM Phantom mount, Steiner TX5i 3-15x50, LT104-34 $2,800.00 Without optic & mount $1,400.00

Built by me

LaRue LT-15 6.5G 18" Ultimate Upper, Crimson Trace 6-24x56 MR-1 MOA Illum LT204, ACS, RATT, PRI Gasbuster, YHM Phantom mount $2,000.00 Without optic & mount $1,350.00

LaRue LT-15 6.5G 18" Ultimate Upper, Crimson Trace 6-24x56 MR-1 MOA Illum LT204, ACS, RATT, PRI Gasbuster, YHM Phantom mount $2,500.00 Without optic & mount $1,700.00

LaRue LT-15 Stealth 2.0 M-Loc upper, 20" Stealth barrel, MBT-2S flat,US Optics TS 5-25x50mm JVCR, Sig Alpha2 mount, YHM Phantom mount, PRI Gasbuster $2,400.00 Without optic & mount $1,650.00

LaRue LT-15 MBT-2S, Black CTR, Ergo, Stealth upper, Odin Works 18" DMR BBL, Sig TANGO4 , 6-24x50mm, FFP, Dev-L Mrad Illum , LT104 VFZ $2,250.00 Without optic & mount $1,550.00

LaRue LT-15 Wilson Combat upper, Criterion 20" HBAR 223, OdinWorks adj gas block, Wilson mount, TriggerTech Competitive flat, US Optics TS 5-25x50mm CMS, Spikes H2 buffer, UTG Pro 17" rail, YHM Phantom mount, ERGO grey $2,100.00 Without optic & mount $1,500.00

LaRue LT-15 Wilson Combat upper, Wilson Super Sniper 18" 223, Sig mount, TriggerTech Competitive flat, US Optics TS 5-25x50mm CMS, YHM Phantom mount, Expo H3 buffer, BCM Mod4, ERGO grey $2,100.00 Without optic & mount $1,500.00

Prices are for ftf in central MI, Gladwin area, or plus shipping from my dealer to yours. DISCRETE PP F&F, Zelle, Venmo, USPS MO, cash, checks held until cleared.

Camera Land's - Birthday / Labor Day Sale Now through Tuesday September 6th.

September 1st is Doug's Birthday and September 5th is Labor Day so we are running this sale from Now - Midnight September 6th

Everyone should attend a BBQ and eat some cake, have a great end of Summer blowout weekend and while you're having a blast, remember It's Doug's Birthday

We have been stocking up, readying for this great sale. Whatever you want, if we have it we will hook you up. If we are out of it we will get it for you. We've been adding so much to our web site that if you haven't looked recently you really should.

We are now a stocking Revic dealer.

We just got in a HUGE delivery from GPO with many discounted Open Box, Demo & Closeout options.

Our in stock inventory of Leupold, Steiner, Konus, Nightforce & Swarovski has never been stronger.

We've lowered the prices on our web site on all offerings from Athlon, Element, GPO, Hawke, Konus, Kowa, Meopta, Sig Sauer, Sightron also, add Steiner to the cart for extra special savings.

Also heavily discounted are:

Azden Microphones

Peak Design

Benro Tripods and Heads

Slik Tripod and Heads

Promaster Tripods and Heads,

Tenba & Tamrac Bags

The reductions also were applied in our Clearance Section, Specials Section and even in the Bundle Section

A few items worth pointing out:

15% off all Slik Tripods with Extra Savings on the Slik Pro 824CF Carbon Fiber Tripod + Slik SVH-501 Video Head reduced from $449.90 to only $199.99

GPO Spectra 6x 2-12x44i - BRWi Riflescope reduced to only $749.99
When a little more is what you really need. The Spectra™ 6x provides a wide field of view, excellent light transmission, superb low-light resolution and extra magnification for those challenging long-range shots.

Sig Sauer Buckmasters Combo Kit, includes 3-9x40mm - BDC withthe 1500 Rangefinder, reduced to only $219.99
The Buckmasters Rangefinder and Riflescopes were inspired by Jackie Bushman to bring the performance of SIG SAUER Electro-Optics at a value that is within reach for every hunter. The riflescopes feature a custom Buckmasters Bullet Drop Compensation (BDC) reticle that has holdover dots out to 500 yards. The rangefinder will provide lightning-fast-ranging performance in a vivid red illuminated display optimized for low light hunting. As an extra value, the rangefinder can be used in “Buckmasters Mode” which comes equipped with 8 onboard ballistic groups, so the rangefinder can indicate which Buckmasters BDC holdover dot to use in your riflescope.
Features:
Custom Buckmasters Bullet Drop Compensation (BDC) Reticle with holdover dots out to 500 yards
Up to 9x or 12x Magnification
Vivid Red Illuminated Display optimized for low light hunting (Rangefinder)
"Buckmasters Mode" with 8 onboard ballistic groups (Rangefinder)

Konus KonusPro-M30 1x-4x24mm Riflescope with Dual Illuminated Center Dot reduced to only $169.99
This true 1X-4X magnification range is perfect for everything from competitive shoots and close quarter combat, to providing fast and accurate target acquisition associated with hunting dangerous game. The robust 30mm, one-piece tube construction assures strength and durability. As with all the M-30's, the 1X-4X24mm was designed to handle the punishing recoil of todays most powerful guns.The unbreakable glass engraved, 30/30 dual illuminated reticle provides easy target acquisition, while the fully multi-coated optics provides increased luminosity at almost any hour of the day.

We want to hook you up so call us, 516-217-1000, and let's discuss which Camera, Riflescope, Binocular, Spotting Scope, Rangefinder, Tripod or whatever it is you're looking for so you get exactly the right product as well as getting a fantastic deal

We've got MANY other deals going on so please just give us a call, 516-217-1000, to discuss the Optic, Camera or Tripod you're looking for and we will hook you up.

Check out our Just Arrived Section, New Daily Flash Sale as well as our Sale Flyer

Take a look at our Recent Newsletter

Save big $$$ - Open Box, Demo, Clearance, Bundles & Specials

We appreciate all the orders and support. Please stay well and safe.

If there is anything you're looking for please give us a call at 516-217-1000. It is always our pleasure to speak with you. Always give a call to discuss options and what would be best for your needs

Have a great day & please follow us on Instagram at gr8fuldoug1

Thank you for your continued support.
If there is anything else that we can assist you with please let us know.

Camera Land
720 Old Bethpage Road
Old Bethpage, NY 11804
516-217-1000
Please visit our web site @ www.cameralandny.com

I bought a defiance tenacity action about a year ago. Put it together for a 6mm creedmoor build. While I waited for powder primers and brass I constantly cocked it and closed the bolt and dry fired I'd say about 5k times.


Fired 5 rounds today, to check function, and get a fire formed case. After doing so. I tried to find my jamb point with 3 cases using locktite in the case mouth. While I was doing this, the bolt felt like it was grinding on something when lifting it. Took the cases out and put rounds in that the COL was well below the jamb point. Still getting a grinding feeling upon bolt lift. Then no bullet at all. Still grinding.

Been in the AR game for awhile. Bolt actions are new to me. Any ideas why this is happening?

I am right at the end of calling my load workup for my new 6cm barrel done. Looks like I have 2 nodes one is a touch tighter but falls off faster. The other is not as tight but is almost twice as wide and falls off slower. Right off the bat I had decided on the smaller but after looking I think I'll use the other with the wider node for more forgiveness. What your thoughts?

Vortex PST 5-25x50 EBR-2C MOA
Vortex Rings
Vortex Level
Vortex Switch View Lever
$650

Remington 700 RH SA
.308 Chambered by Ski Rifles
Included
-Muzzle Brake
-Trigger Tech Diamond Flat Face
$1000

XLR Evolution $500
Atlas V8 $150

Can sell as complete package or as price above (Scope/ Rings, Barreled Action, and Chassis/ Bipod) Selling for a friend.
(317)-697-9505