I am looking for drawings of the Steiner STR MIL reticle showing subtension, line thickness in mils, etc. I cannot find it anywhere on the web and the current Steiner Reticle Guide (https://www.steiner-optics.com/resources/reticle-guide) does not include this reticle. This reticle is available in the H6Xi line of scopes and if there is a drawing floating out there I sure can't find it. Does anyone have this that they can share? Thanks!

6.8 inches long and 16oz is pretty cool and it takes Acog mini mounts. Not very excited for 3-9 magnification and MOA only though, what do y’all think?

Game changer - OG with the staps. Standard fill multicam

Used, some dirt and grime spots from use, but no tears.

$75 shipped

This Sig Cross has seen little use and is in great condition.

$1400

NF and Accutac not included

Trades:
SA TL3/SR3, Carbon Prefit (22CM, 6CM, 6.5 PRC), NX8 (Mil-R or Mil-XT)

53 year old Frenchie got conned. How gullible are thirsty women these days.

French Woman Scammed Out of $850K by Con-Man Posing as ‘Brad Pitt in the Hospital’ With Ai-Generated Images and Chatbot

Login to view embedded media
It’s hard to get the right address or car and even harder to match people who have warrants. And it only took a little over 3 days to figure it out . But everyone did go home safe . Fucking retards

Area 419 Headapace and Ogive Kit

Most precise and consistent way to measure

Comes with Stand

Brand new, hasn’t been used (was a gift to me) , just opened to take photos

I already own Hornady and SAC kits

SOLD shipped

A300 Ultima 12ga​

New A300 Ultimate 12ga. Only fired a few rounds to pattern it. Comes with all 3 factory choke tubes.

$720 shipped to your FFL.

I guess this is a general question, but it involves a rimfire, so here I am.

I got myself a new T1x, and I am testing types of ammunition at short range. I am zeroing at 35 yards, and I will be moving out to 50 yards once I have favorites. The final goal is to kill squirrels.

I shot several types of ammo the other day at 35, and while an Eley product came in with the smallest groups (0.468"), cheap CCI Blazers shot prettier groups (0.555"). Each group was one nice round hole. The Eley groups were irregular.

Should a shooter conclude anything from the fact that one brand of ammunition shoots nice, round, symmetrical groups?

I was pretty surprised by the Blazers. I also shot CCI Sub-Sonics, and I got a nasty flyer I'm pretty sure I didn't cause.

ATF not giving up until the last minute:


Note to noob gun owners, DON"T WRITE QUESTIONS TO ATF!

Unfired. Includes trigger. No Trades or offers, please ZELLE or USPS MO only-$600 shipped insured USPS.

Pistol is a CZ shadow 2. I''ve had it for maybe a year. I doubt it has more than 500 rounds through it. I decided to clean it today and I noticed this chip inside the slide. It functions fine, I shot it yesterday. I'm just trying to figure out what the chip is from.

Sold

New unfired as titled. 20” barrel threaded stainless.

$950 shipped no trades

I will add live picture later today.

Listening to that lying sack of shit toilet brush...

"Biden has been working 24 x 7 to bring hostages home..." "This is his plan laid out in May." "Biden did this, Donald Trump had nothing to do with it."

This is the same lying sack of shit who says "Biden pretty much retires by 7 pm..." Yeah, 24 x 7.

Damn I can't wait for next week.. so we never have to see that dumb-ass brillo pad lying her ass off... ever again.

Sirhr

Dana Loesch was discussing the confirmation hearings of Pam Bondi. Basically, she stated that she like what she saw of Bondi's performance, but that she wished at least one GOP Senator would quiz her on her support for Red-Flag laws and her work with Rick Scott on that same issue. She advertised that her "2nd hour" would be an interview with Gov. Ron DeSantis and that she would inquire with him about the state of red Flag laws in Florida.

Well, the interview came and went and not a peep about Red-flag laws. She asked several generic questions about the border and Sanctuary Cities, etc. and just let let him bloviate about that for about 20 minutes. Narry an inquire about Red flag laws.... none at all.

I wonder what happened. Was she "advised" by producers not to bring it up with DeSantis (more than iikely his people not hers)? This tells me that the resistance to Red-flag law elimination is greater than originally thought. I hope that's not the case and we get something done before DeSantis leaves office, but I'm starting to get discouraged. Why didn't you follow through Dana and ask him???? Disappointed!

We need to start primarying some of these "alfa hotels..."

I have a couple dies I bought and am not currently using. Both sizing dies come with SAC decapping mandrels.

All three are in new condition.

SAC Dasher Sizing Die $265 shipped
SAC 223 Rem Sizing Die SOLDDD
SAC T.H.E. Seating Die Type 4 SOLDDD

I do Tactical Games competitions and the furthest we've shot out to is about 600 yards. A lot of guys are starting to go with a 3-18 type scope (something like Mk 5 HD) and offset red dot. We will typically have one to two stages where we shoot out to distance 200 - 600. Most distances on other stages are from 50-100 yards for rifle. Precision is paramount in these comps. Every miss is a 10 sec penalty in the workouts/stages.

I typically use a Nightforce ATACR 1-8 and it's a great scope (obviously) and has serviced me well but I don't know too much about the MPVO options out there. Since we are shooting 600 yards would a simple reticle be better (non-Christmas tree type)? Illuminated? 2-12 or 3-18? What's lowest magnification range on both ends you guys would look at? I don't want to get anything that has too much magnification. I would also be using an offset red dot for closer range targets.

I've heard general rule these days is 2x for every 100 yards so a 2-12 might be good but is that going to be much better than my ATACR 1-8? Would I still need an offset red dot for a 2-12 (never looked through one before). I figure a 3-15/18 type scope with offset red dot would probably be best option if I decide to go this route to take advantage of the MPVO type platform.

Any good suggestions and/or thoughts? I've looked at NXS, Vortex, Steiner, Leuopold, etc. I don't want to break the bank but maybe $1000-$1500 range. If I can sell my NX8 maybe higher.

Thanks!

Dillon RL1100 Press w/ both Small & Large Priming Systems without Dies or Conversion, DP66137, details located here, purchased from Grafs September 2020, barely used for maybe 3K rounds of 9mm , does not include dies or caliber conversion which are required to reload, I will include mounting hardware and the small pistol casefeed plate - Currently $2200 plus tax and shipping, selling here for $1999 $1899 shipped & insured in Dillon shipping box

DILLON 9MM LUGER/PARA/ 9x19 CARBIDE 3-DIE SET, DP14406, barely used for maybe 3K rounds in retail case - Currently $129 plus tax and shipping, selling here for $110 $99 shipped

Dillon RL1100 / Super 1050 9mm Luger Conversion Kit, DP20482, barely used for maybe 3K rounds in retail case, Currently $195 plus tax and shipping, selling here for $165 $149 shipped

DILLON RL1100 SPARE PARTS KIT, brand new, never used any parts, DP66206, Currently $67 plus tax and shipping, selling here for $49 shipped

Dillon Primer Flip Tray, DP13606, like new, barely used, Currently $35 plus tax and shipping, selling here for $25 shipped

Dillon Primer Pickup Tubes, 2 Small, 2 Large, new in package DP20056, Currently $45 plus tax and shipping, selling here for $35 shipped

Dillon 9mm Luger case gauge, DP15161, Currently $25 plus tax and shipping, selling here for $15 add-on

Shockbottle 100 Round 9mm Luger Hundo Chamber Checker Cartridge Case Gauge - Currently $99 plus tax and shipping, selling here for $79 shipped

DAA Mr.Bulletfeeder Gen 2 by Double-Alpha 9mm - 38S, barely used for maybe 500 rounds, currently $519 plus tax and shipping - selling here for $499 $475 shipped & insured

DAA Magnetic Powder Check 2.0, 103136, barely used for maybe 500 rounds, Currently $69.95 plus tax and shipping, selling here for $59 $49 shipped

RCBS Taper Crimp & Seater combo die 9-mm Luger/9X21/9X23, needed to run the Powder Check die and Mr. Bullet Feeder on most presses, barely used for maybe 500 rounds, Currently $38 plus tax and shipping, selling here for $25 shipped

It all worked amazingly well. I just don't shoot enough to justify it. Serious buyers please email for pictures. Prices are firm but I will combine items for a fair offer, no lowballs.

PayPal Friends and Family, Zelle, or USPS MO only.

I will be posting another thread with many quality 9mm components. Thanks.

Login to view embedded media
Post from Zeiss today. Looks like they’re available now. Excited for these!

Gen 2 Ruger American ranch 16” fluted 300blk with vortex viper pst 1-4 mil reticle, vortex rings, adjustable kydex cheek piece, rearden SPB muzzle brake, extended mag release, Harris 6-9” bipod and 10rd pmag. By far the quietest gun I own, only about 100rds through it. $715 shipped to your FFL. Selling as a package, will not separate. NO TRADES.

Looking to move this annealeez brass annealer. Sale includes everything pictured. Unit works fine however the digital display isn't perfect. It doesn't light up until you press a button so in order to set the machine you press the button, dial in the desired number and then it will maintain this. I can send a video to interested buyers.

Would prefer Zelle or PayPal payment

Asking $200 shipped

I put together a MK12 Mod 0ish upper. I like my mod 1 better so never used this. Build as follows, 0 rounds on it. Asking $1200 shipped.

-GREY GHOST PRECISION FORGED UPPER RECEIVER
-BCM FORWARD ASSIST
-BCM DUST COVER
-BALLISTIC ADVANTAGE PREMIUM 18” SPR BARREL 1:8 223 WYLDE
-PRI GEN 3 MK12 MOD 0 HANDGUARD
-PRI GEN 3 MK12 MOD 0 SEAN SLEEVE
-PRI FLIP UP FRONT GAS BLOCK
-PRI M84 GAS BUSTER CHARGING HANDLE
-CRYPTIC COATINGS MIL-SPEC BCG
-DEAD AIR KEYMO MUZZLE BRAKE