SOLD New Seekins SP-10M (military issue version) 22" 6.5 Creedmoor FDE
- Buy - Sell - Trade
- 6 Replies
Selling my new in box 22" Seekins SP10M in 6.5 Creedmoor.
$4,500 Shipped
The difference between the SP10M and regular SP10 is:
The SP10M, has extensive testing performed all the way down to the parts selection. We handpick the components that will eventually all come together to complete that particular rifle. The components are measured before and after coating processes to even reconfirm the fitment and finish. The SP10M is currently being fielded for the US SOCOM Operations Tier 1 and Tier 2 units. We have tested both military issued ammunition and high-quality factory match ammo. The rifle is tested for accuracy before it leaves with high quality ammunition, each rifle receives a 60-round break in at the bare minimum. The rifle does not leave our facility unless it shoots half inch if not better!
$4,500 Shipped
The difference between the SP10M and regular SP10 is:
The SP10M, has extensive testing performed all the way down to the parts selection. We handpick the components that will eventually all come together to complete that particular rifle. The components are measured before and after coating processes to even reconfirm the fitment and finish. The SP10M is currently being fielded for the US SOCOM Operations Tier 1 and Tier 2 units. We have tested both military issued ammunition and high-quality factory match ammo. The rifle is tested for accuracy before it leaves with high quality ammunition, each rifle receives a 60-round break in at the bare minimum. The rifle does not leave our facility unless it shoots half inch if not better!
Attachments
Rounds not chambering
- By UndFrm
- Reloading Depot
- 46 Replies
Using 6 Dasher in Zermatt Origin
After 3x firing, I verified that the brass won't chamber in so I bumped the shoulder.
After bumping the shoulder and without seating a projectile, I verified that the brass was chambering without too much (or any) resistance on the bolt. So, I proceeded to load the rounds (primer, charge and seat).
Now that a projectile has been seated, I took the firing pin out to verify, and it won't chamber. I also verified that none of the rounds that I loaded can be chambered, which without the projectile they were. The bolt simply wouldn't close, even with significant pressure.
First thing I thought, the projectile is seated too long. I compared the case to a dummy round I keep on the bench, it's slightly less than the dummy round's datum and cartridge base length, which chambers with just a hint of pressure.
Any idea what's wrong that I am doing and how do I fix this?
Edit:
Took a fresh round (unseated) that chambers with 0 pressure on bolt. Charged it and seated. It does chamber in but there is a little resistance. Also, there's some stuff mark on the projectile.
After 3x firing, I verified that the brass won't chamber in so I bumped the shoulder.
After bumping the shoulder and without seating a projectile, I verified that the brass was chambering without too much (or any) resistance on the bolt. So, I proceeded to load the rounds (primer, charge and seat).
Now that a projectile has been seated, I took the firing pin out to verify, and it won't chamber. I also verified that none of the rounds that I loaded can be chambered, which without the projectile they were. The bolt simply wouldn't close, even with significant pressure.
First thing I thought, the projectile is seated too long. I compared the case to a dummy round I keep on the bench, it's slightly less than the dummy round's datum and cartridge base length, which chambers with just a hint of pressure.
Any idea what's wrong that I am doing and how do I fix this?
Edit:
Took a fresh round (unseated) that chambers with 0 pressure on bolt. Charged it and seated. It does chamber in but there is a little resistance. Also, there's some stuff mark on the projectile.
Can't see attached or embedded photos
- By NiteQwill
- Lowlight Directives
- 23 Replies
Anyone having issues seeing photos?
I've tried multiple mobile (Android and iOS )and computer (Mac and pc) without any luck. Both signed in, signed out, and incognito.
When you click where an image should be, it says: image cannot be loaded.
I've tried multiple mobile (Android and iOS )and computer (Mac and pc) without any luck. Both signed in, signed out, and incognito.
When you click where an image should be, it says: image cannot be loaded.
SOLD 1 unopened case of FGMM LR GM210m Primers
- By Darryle
- Buy - Sell - Trade
- 3 Replies
Located in Fort Worth, 5000 primers
Trade for 5000 of the FGMM GM205M SR primers
I prefer ftf, no shipping, no piece mealing, case for case
Trade for 5000 of the FGMM GM205M SR primers
I prefer ftf, no shipping, no piece mealing, case for case
SOLD JAE 700 Gen 4 with NV Mount, Bag Rider and Arca priced to move!! Open to offers
- By jhoward8584
- Buy - Sell - Trade
- 12 Replies
Attachments
2A WATCH: Seattle, WA State. Anti-2A police chief Shon Barnes.
- The Bear Pit
- 15 Replies
A heads up on Seattle, WA State new police chief Shon Barnes who had transplanted from Wisconsin and took office in Seattle in the recent week. He is an anti-gun poofter who has had a near lifetime record of anti-2A remarks.
SUMMARY:
Login to view embedded media
FACT CHECK: CONFIRMED
mynorthwest.com
----------
----------
“Sometimes, it requires an evolution of our thinking. What was written in 1789 may not be appropriate for 2022 unless we’re OK with kids being killed,” Barnes explained, referencing the Second Amendment.
----------
----------
Fuck your "thinking" and fuck your "evolution". Don't tell us how to think, because WE think that you and your ilk are no different than those little worms that burrow into human flesh and lay their eggs in it. The policies that you endorse generates an entire population of unarmed people who are ripe for plucking for both criminals and tyrants like yourself.
STAY INFORMED AND BE ACTIVE ON THE NET SPHERE.
People like that all have further political ambitions and opinion-influencing opportunities in the current posts they occupy. Their progress needs to be made as difficult and costly as possible, via enough social media presence getting involved and keeping tabs on them the whole time.
SUMMARY:
Login to view embedded media
FACT CHECK: CONFIRMED
Likely Seattle Police chief Shon Barnes questions 2nd Amendment
The frontrunner to lead the Seattle Police Department doesn't appear to support the Second Amendment. He seems to want to abolish it.
mynorthwest.com
----------
----------
“Sometimes, it requires an evolution of our thinking. What was written in 1789 may not be appropriate for 2022 unless we’re OK with kids being killed,” Barnes explained, referencing the Second Amendment.
----------
----------
Fuck your "thinking" and fuck your "evolution". Don't tell us how to think, because WE think that you and your ilk are no different than those little worms that burrow into human flesh and lay their eggs in it. The policies that you endorse generates an entire population of unarmed people who are ripe for plucking for both criminals and tyrants like yourself.
STAY INFORMED AND BE ACTIVE ON THE NET SPHERE.
People like that all have further political ambitions and opinion-influencing opportunities in the current posts they occupy. Their progress needs to be made as difficult and costly as possible, via enough social media presence getting involved and keeping tabs on them the whole time.
