It's my fault cause I just couldn't come up with a good topic. Maybe you can help me out . Nothing to do with boats please, I'm not that desperate. Maybe something to do with metal detecting , smoking pot or scrapping metal . Those activities can be very interesting but I don't like to brag and make people feel inferior so I have to be cautious .

Only 100 of the KBI Inc. Dragunov's were ever imported before the '94 ban went into effect making these some of the rarest Russian Dragunov's on the market. This one comes in its original KBI box with all of its accessories. Inside the box is the rifle, the numbers matching scope, accessory bag with 4 spare magazines, cleaning kit, spare batteries still in the original packaging, manual, warranty card, oil bottles, sling and bayonet. As you can see in the photo's this SVD has been boxed up sitting for the last 30 years. The rifle has all its matching serial numbers including the scope and the correct Russian marking on the top of the stock near the rear of the receiver. The Dragunov's have only gone up in value and this one will as well. Don't let this one get away from you or your collection.

To purchase this gun, you must message me though the board here or contact me through our web site email:

[email protected]

We must talk via voice to make any arrangement. Do not wire or send any funds without calling the number you receive by contacting me through this site or via the above email. Pay close attention to that email address as scammers make emails that look similar. Our business is in Tulsa Oklahoma, I am in Tulsa Oklahoma, and our bank is a locally owned bank in Tulsa Oklahoma.

Price:$ 34,000.00

Damn.. .have not watched this movie in ages.

It is brilliant! One of the best movies of the late 1980's early 1990's. Can't remember when it came out.

Holy crap what a perfect movie.

Cheers,

Sirhr

Hey all,

I posted these up seperately, but figured this might be easier.

I have 2 silencers sitting at my FFL that I am not going to use. I would like to sell them together unless someone comes forward for a single.

I no longer need them. Sold the host I was going to use the 45 on and the 9 was a bogo. These are brand new, never transferred to an individual. Still on form 3s and ready to go to your dealer! These do NOT come with a piston from the factory.

These are out of stock on Silencer Shop and I think listed at $526 each. I'll beat that if I can sell this asap. These are priced UNDER DEALER.

You are purchasing:
1x SilencerCo Octane 45 2.0
1x SilencerCo Octane 9 2.0

NO TRADES

ASKING PRICE: $730 shipped for the pair, or $375 each.

Payment Methods: Paypal F&F, Venmo, Zelle, Cashapp (Buyer pays all fees)

Shipping method: USPS Priority Mail from my SOT to yours.

Was just curious if there have been any rumblings of a gen 2 atacr. I recently sold all of mine because the rotating oculars drove me crazy. Now I keep finding myself looking at them again. Really feel like the atacr line is due for some updates and didn’t know if anyone had the scoop.

We’re excited to announce some big changes coming to the site! Starting July 4th we’ll be updating our homepage and adding some new features for you to enjoy. Don’t worry, we’re keeping all the parts of our community website that you’ve come to know and love as is, just adding a few new elements to make our website more functional and intuitive. Here’s what you can expect.

You’ll be able to…

BOOK 1-on-1 lessons with Frank and others
You can book lessons online or in-person so that you can get feedback wherever you’re located!

GET MORE with our new subscription service
It’ll now be easier to manage your subscription and gift subscriptions to others! You’ll now be able to update or cancel your subscription directly from your account.

I should also mention, pricing will not be changing at all, we’re only moving in order to have access to a more modern system with better features for all of you.

Have access to everything going on across the site
This site has grown to have the community, articles, videos, a shop, and more, so it only makes sense to have a page where you can see everything going on and have quick access to all of it.

The HideTV Creator Network
We’re also starting a new system where anyone can create videos on HideTV and earn money from it! More details to come soon, but if you’re interested, PM me!

More updates to come so keep an eye out on the Hide!


Here's a rough idea of what the new homepage will look like, excited to roll it out

CYPRESS, TEXAS. JUNE 18, 2024

Taekwondo grandmaster and instructor Han An, and veteran of the Republic of Korea Armed Forces, was in his dojo with his family on Tuesday afternoon 06/18/2024 when they heard the terrified screams of a woman being assaulted at a cell phone shop next door. Han An immediately ran to the source of the screams, and found 19 year old Alex Robinson pinning the unidentified woman to a countertop with his hand over her mouth. It took just one methodical punch and kick for 8th degree black belt Han An to knock the brazen broad daylight rapist out cold. While Grandmaster An pinned the unconscious suspect and held him for the police, An's entire family also followed, escorting Robinson's would-be victim into the safety of their Taekwondo hall and comforting her while waiting for deputies and emergency medical services to arrive.



Alex Robinson was later booked into the Harris County Sheriff's Department jail on charges of attempted sexual assault, unlawful detention, and physical assault.

19 year old suspect Alex Robinson.



ARTICLE:

8-1 in favor of disarming alledged domestic violence suspects


Thomas dissented.

Question for you generator experts: I'm looking at Generac's new largest portable genny, the 18000efi, which is fuel injected... Can this unit be made to run on propane, and if so, how easily done would it be? If there's a better fuel injected 18Kw genny around that isn't made in China- I'm open to recommendations on a better quality genny. I'd actually prefer a Honda powered or Yamaha powered, but I haven't seen any.

ETA: I already contacted Generac and they don't make a propane kit for this model series.

Thanks

This sucks, but this needs a new home.

2014 AI AT folder, thumbhole conversion installed, 308 with a 20” threaded Bartlein (unsure of round count but it’s a hammer with FGMM)

Has an AO thumb rest installed, as well as the Sawtooth Arca Rail.

Rifle has been rattlecan painted by yours truly.

Will come with 3 AW mags

$4500 shipped.

I have a 6.5CM that I load for, current load is H-4350 and 130gr Berger AR-Hybrid OTM. With the price of 4350 getting over $60.00 a pound I have started looking at other powders that are similar. What is the general consensus on VV N-150 and N-160 in the 6.5CM with 130gr bullets? I can get VV for almost $15-20 a pound cheaper than H-4350.

Interesting that its OK for us to do that kind of shit, but when someone else does it to us, we whine like the bitches we have become, under this fucked up so called leadership. Think these faggots need too stick to, checkers.

I have two Remington 700 actions for sell.
1 short action standard .308 bot face blued.
1 long action magnum bolt face stainless.
Will post pics later.
Any interest?
$450 each plus shipping OBO.

When their avocado toast supplies run out, the millennial fruit bats are going to be out in the streets demanding action against the cartels!

Sirhr

Selling a JP Enterprises APAC Chassis.
Lightly used... I would say the condition is between 90%-95%.
No scratches through the anodizing.
Arca Swiss Rail

Details include:

1. Compatible with nearly all Remington 700-pattern actions
2. Durable, light-weight 6061-T6 construction
3. Folding stock with rock-solid locking hinge
4. Adjustable stock height, length and cant via quick, detent-adjustable tension wheels
5. Ambidextrous design accepts right- and left-handed actions
6. Durability-tested hand guard mounting with integral, extendable Arca-Swiss feature
7. Compatible with full line of MK III accessories
8. Compatible with all standard AR-style grips
9. Compatible with AI-pattern magazines
10. Integral bubble level
11. Durable hard anodized finish

$ 1,150.00 shipped.

Got an email from Silencer Central today, stating my suppressor purchase had been approved.......considering last year was a "leap" year, it took 368 days...........1 year, three days.........purchased 6-18-2023............gun show in KC...............shit show..........

So I’m looking to switch up my current optic from a Gen 2 Rzr 4.5-27 to something different but don’t know what direction to head. I was thinking about playing with the XRS3 with the EQL reticle, but haven’t heard much in regards to people’s opinions on the newer stuff from Bushnell, but I’m open to suggestions in that price range.

The post Frank from Bartlien made about the 308 barrel with like 27k rounds made me wonder if and how people are deciding when it’s time for a new barrel. I always pulled when accuracy goes south and I can’t get it back with deep cleaning or slightly re working the load or if the velocity drops to a point that I can’t keep it stable.

Like new condition, Nightforce 4-16x50 ATACR, Mil-R reticle, 2nd focal plane. No scratches or blemishes on the scope. Comes with box and all accessories as it was new, including scope caps.

Sorry no trades

Shipped to you for $1850.00

I have 2 BNIB ZC 527 5-27×56 (MPCT-3X) 10 Mil NLE + 2 Tenebrex ARD + 2 6 MIL 1.5" Block Mounts

SKU 400-0474

Price incl shipping and insurance … PayPal/venmo/check

I would like to sell each of these as a "package"

Asking

$3800 for the scope
$100 for the ARD
$350 for the block mount
$4,250 each package

I have never touched or handled scopes and they have been in the box since I received them 5-6 months ago.

I bought 4 of these and then I sold 2 of these scopes on the Hide a couple of months ago. I still have not had any time to do anything with the last two scopes, so looking to sell.

Here is the link for the last two I sold. These are the same exact everything but adding in the Mount and ARD.


Thanks
Landon

Up for sale is a factory Remington M24 with "RR" prefix serial number as you can see in the photo's. The rifle has a Leupold mark 4 3.5-10x40mm scope. This M24 comes with a list of items from the factory to include its factory accessory pelican case with assorted parts, tools and fasteners. It also has the factory flash hider that is shown in the photo of the rifle in the case. It also has a set of the factory Redfield Precision peep sights with interchangeable front sight which have almost always been lost or misplaced as they are seldomly used, but this one has them. It also has a spare firing assembly and to many other little fasteners to list here but if but rest assured that if you have a screw go missing on the rifle you have a spare. This is a Rare rifle and will make a great display piece in your collection or shooter on the range. Don't let this great M24 get away from you. Below are the photo's of what's included.

Price: $8000.00

To purchase this gun, you must message me though the board here or contact me through our web site email:

[email protected]

We must talk via voice to make any arrangement. Do not wire or send any funds without calling the number you receive by contacting me through this site or via the above email. Pay close attention to that email address as scammers make emails that look similar. Our business is in Tulsa Oklahoma, I am in Tulsa Oklahoma, and our bank is a locally owned bank in Tulsa Oklahoma.

The footage allegedly shows Baldwin pointing a prop revolver and firing a blank round at a crew member, using a gun as a pointer to direct crew members on set, and FaceTiming with his family during firearms training, among other “erratic and aggressive behavior.”

Click to expand...

Watching national news, on the networks….

All they talk about is the Blazing blazing, blistering HEAT. I checked the national weather. Some cities are actually having temperatures in the low 90’s but many are below 90 and some in the 70’s.

Its in the south, its in the north, its in the west…..It’s fucking summer. And frankly, it’s just not That Warm. (According to the National Weather Service which obviously has not gotten the memo ordering to report that we’re suffering global warming, democracy destroying heat)

Sounds way too much like climate propaganda. Listening to the news caster (Opinion caster??) say it, temps more than a 110 are being experienced in every city south of Fairbanks, Alaska and if we (implied) don’t start eating bugs and all of us only drive electric cars and everyone turn off their air condition, each and every one of us will be dead by 10:00 PM this evening. (That would be 10:00 PM, June 20, 2024).

Oh a little add on, they are all going absolutly crazy about Louisiana posting the 10 basic rules of justice used around the world, into our classrooms. OMG this is going to destroy our democracy. (Hope it does so we can go back to being a Constitutional Republic).