Filter

Some of you guys are in for a surprise

Listen,

I have been working hard, granted mainly behind the scenes to improve the user experience and how this site runs overall, then in-between that and my classes, I have been working to bring you new content as fast as I can. So busy is a word, distracted as to what is going on day to day here is a bit more accurate.

So 2 weeks ago I was in Georgia and during my travels I get some emails and text messages about a paid sponsor on here having a major customer service issue. I take a cursory look, it's a mess, I delete the post and then all hell breaks loose. I get a call from the company, I get an unsolicited call from the member (which I absolutely hate) and I go in and restore everything. I talk to them, I talk to him, I figure it's all sorted out. Sure the sides have issues, and to be perfectly frank, I am not 100% buying the customer's story, but you have to entertain it enough to make it right. Apparently those attempts to make it right were not enough for you all.

Playing team sports to burn a sponsor down is not gonna fly, and bunch of long time members and big talkers are in for a 2 week break. Especially the ones that decided to follow the sponsor to other forums and make sure the fire jumped to those fields too. Bad move, and I will absolutely toss a few over it. And DAN you are the biggest piece of shit in all this, you won't leave, you won't shut the fuck up, and all you do is act like a troll here. We ban every account and all you do is make more. All you guys who follow this fucking asshole down the hell hole will have nobody to blame but yourself. You're not the only one, but you're definitely the most consistent asshole on this site.

Why the fuck would you attempt too wreck a company in this day and age ? I can understand it if the fck up revolves around theft, or plain old scumbag actions one after another, but the guys here are trying to make it right. They stand toe to toe saying we screwed up, we are sorry, this situation got slid around the bloc in a bad way, but it's not the end of the world. Ask yourself this, you have a barrel chambered and threaded, you don't install the barrel on to the action, but send it to the customer, who then installs it himself and the action threads get damaged... Hmm, he claimed to hand tighten it but he also told them he put a wrench on it. That part was not repeated here, Sounds mighty suspect in my reading. But sure the resulting attempts to fix the issue created a secondary issue which they admitted was a fuck up. They apologized and moved to make it right. It was a case of 3 side at the shop, a misunderstanding regarding the actions to remedy the problem, it happens, the result was outta line.

No after everyone moved to make it right, you all started a 6 page dog pile.... really. This is a company, who employs people, in an age where the Gun Industry is under attack. You guys in the cheap seats have no clue what companies are doing to us every single day. The threats, the removals, the increased hoops we have to jump through to be considered "moral" in their eyes. They do a metric ton of evil shit on the backside to us, and here a company thinks it has a safe haven and you all just dog pile on them. Every mistake they acknowledge and the even spelled out how the mistake happened and how they plan to fix it moving forward. Then, nothing but Shit from you guys. Do you think I voluntary wanted to put an age disclaimer on this site, fuck no, they make me to in order to send emails out, without no mail server. In fact I have to mask my actions on much as possible in order to survive, all it takes is some asshole DNC flunky with a hard on to shut you down today. It has almost happened more times than I can count. They will lie and say they got an email with porn or dead animals from the site to close us down.

it's so not cool, I am trying to build this place to be a nice little safe haven and all you do is make the site look bad. You don't think the other companies in the industry look this shit and go, "fuck no" I am not swimming in that pond. Fuck no, we were not supporting that community after what they did to A, B, and now C... you don't think they are talking or working together and say, holy shit did you see what SH did to X, Y, and Z, fuck that place... cause it happens every time you pull this bullshit.

I am courting companies trying to get deals, I was working for the last month trying to get companies back here, group buys, custom made options for you all, reduced costs, spelling out all the benefits, and then boom, what about that situation... they don't like and it and if you ran a business you wouldn't either. No different than running any service industry, you have Good Customers and Bad Customers, and I am firm believer in removing my bad customers. I am not interested in reforming the attitudes, not worth it, Dan is the perfect example, he has taken every advantage and we let him stay and he fucks us in the ass every chance he gets. We remove him, he makes a new account. We remove that, discourage, he changes emails and new account. He is everything wrong with the internet and some of you follow him blindly down the hellhole to shit on everything HE doesn't like or deem worthy. You can't just walk away and say nothing, it's more fun to dogpile. Which when warranted, I am all about, I will push an issue as far as I can, but I am smarter than you all by knowing where, when and what is appropriate.

Seriously over it, and I am going back to taxing some of your asses, once I determine the biggest offenders who had no dog in the fight, but could not let it go, banned. Once I get the names of those who followed the company to LRH, (you use the same names), banned... I don't give a fuck how much you talk on here, how popular you are, banned. History has proven you will be immediately replaced and while some might be missed, it's usually because they became the butt of joke here. Completely had it with some of you. You are not wrecking this place because you think you are better than everyone else or that you have a clue how things are supposed to be.

Some of you fuckers can ruin a wet dream.

Cerakote process really that “potentially bad"

Upon considering to have my optic and mount coated to match the rifle I get this sort of “push back” from applicators. They are saying the process (heating specifically) can cause issues with the optic itself. As I told one guy who was really apprehensive, I get it your process can cause a $1k+ optic to be a brick which isn’t good business.

Is this really that problematic to the optic, or more along “we just don’t like to do optics”??

SOLD WTS ZC420 MPCT3X w/ two ZCO mounts and extras

  • ZCO ZC420 MPCT3X
  • two ZCO mounts (Slim line and Block Mount)
  • Tenebraex caps,
  • sun shade
Will come in factory box. $3100 (will reduce for local pickup in Jax/St. Augustine).

Attachments

  • IMG_8465.jpeg
    IMG_8465.jpeg
    497.1 KB · Views: 180
  • IMG_8466.jpeg
    IMG_8466.jpeg
    391.9 KB · Views: 197
  • IMG_8471.jpeg
    IMG_8471.jpeg
    505.9 KB · Views: 195
  • IMG_8473.jpeg
    IMG_8473.jpeg
    777.9 KB · Views: 187

Accessories FS: ARC Xylo Chassis (short action)

For sale is a lightly used ARC Xylo chassis. It is for a short action.

Will include both recoil lugs for action fitment.

This stock has not been modified in any way.

Price: SOLD.

Payment: PayPal F&F, personal check, F2F

First public "I'll take it" gets it.

No trades at this time.

Thanks for looking and let me know if you have any questions or would like more pictures.

IMG_1769.jpg
IMG_1770.jpg
IMG_1771.jpg
IMG_1772.jpg

Thunderbeast Company

I had lost a piece to my Bi-pod.

I had contacted them looking if I could buy just one piece or if I had to buy the pair. A Gentleman namef Sam contacted me back and said send postage and they will drop it in the mail.

I had a busy three weeks and still hadn't received it.
I happened to be traveling through Cheyenne and stopped at their office.

Sam came down and apologized said i slipped through cracks.
Not only did he make it right but I got a pullover als

Thanks Thunderbeast

Man checks himself into local hospital, ends up dead in police custody.

Either authority wasn't respected or he wasn't listening.


Anyway, police will investigate themselves and get to the bottom of it.

Sidearms & Scatterguns Red Dot Dilemma

I guess there comes a time when we must all acknowledge the unstoppable marching of time towards being blind as fuck, I accept it.

There are a zillion damn red dots out there, a zillion mounting methods, it all looks to me like more shit to fail right when you might really really need it one day. I need a little help figuring out what to do here. My irons just arn't as sharp as they use to be and I'm sure in the next few years they will just be useless blobs out there. I wear contacts to correct my vision for distance and will be having lasik this winter.

1- I carry IWB 95% of the time, I'm also not a small man and can literally sweat through a shirt. Will an optic stand up to this daily?

2- I do run nods alot, would be cool if said red dot would work with them.

3- I have mostly glocks that I want to put optics on, my understanding is that direct milling a slide for an optic is superior to the glock MOS and plates..is this true? If so who to use for milling?

4- Irons? I'd like as uncluttered of a sight picture as possible, is a single front post and using the optic as basically a giant ghost ring if the optic dies a thing or not?

Thanks for the input amigos.

SOLD Manners PRS-TCS stock SWAMP MOLDED REMINGTON 700 SA

New never used

PRS-TCS
DOUBLE DEAD TCS SHELL
REMINGTON 700 SA
PRS-TCSDBM MINI CHASSIS
PRS-TCS ADJUSTABLE BUTT SYSTEM
SWAMP MOLDED
PRS-TCS ALUMINUM ARCA RAIL
PRS-TCS FLUSH CUPS 1 LEFT 1 RIGHT 1 BTM
SIKES CLUTCH KIT (1 RAIL, 1 KNOB)
PRS-TCS ROUND ADJ BUTT SPACER .375"

Attachments

  • 20240415_181433.jpg
    20240415_181433.jpg
    210.6 KB · Views: 491
  • 20240415_181437.jpg
    20240415_181437.jpg
    215.3 KB · Views: 489
  • 20240415_181439.jpg
    20240415_181439.jpg
    194.9 KB · Views: 404
  • 20240415_181443.jpg
    20240415_181443.jpg
    205.5 KB · Views: 376
  • 20240415_181456.jpg
    20240415_181456.jpg
    185.2 KB · Views: 350
  • 20240415_181503.jpg
    20240415_181503.jpg
    198.9 KB · Views: 475

Optics Night Force ATACR 5-25

I have both a 5-25 and 7-35 atacr
The 5-25 is the mil c reticle
The 7-35 is the mil xt reticle- SOLD

The 7-35 has the box and sunshade. Will come with the scope only mount has been sold.

5-25 $2400 shipped and insured via ups

7-35 SOLD scope only shipped and insured.

Open to offers if I’m off on the price.

Attachments

  • IMG_8348.jpeg
    IMG_8348.jpeg
    548.1 KB · Views: 251
  • IMG_8347.jpeg
    IMG_8347.jpeg
    437.1 KB · Views: 215
  • IMG_8349.jpeg
    IMG_8349.jpeg
    732.2 KB · Views: 204
  • IMG_8101.jpeg
    IMG_8101.jpeg
    448.6 KB · Views: 204
  • IMG_8100.jpeg
    IMG_8100.jpeg
    395.6 KB · Views: 206
  • IMG_8103.jpeg
    IMG_8103.jpeg
    281.8 KB · Views: 242
  • IMG_8102.jpeg
    IMG_8102.jpeg
    410.5 KB · Views: 254
  • Like
Reactions: jollibee

SOLD For Sale Vortex Razor HD Gen II 4.5-27x56 Gen 2

I'm selling 3 scopes. All of them are in great shape with original box, papers, sunshade and the protective shipping lens covers.

Two of them are EBR-7C and one is EBR-2C

All are MRAD

$1550 shipped each.

For the life of me, I don't know how some of you get such good pictures of the reticles.

RazorBoxes.JPG


RazorG2L1.JPG
RazorG2L2.JPG
RazorG2L3.JPG
RazorG2L4.JPG
RazorG2S1.JPG
RazorG2S2.JPG
RazorG2S3.JPG
RazorG2S4.JPG
RazorG221.JPG
RazorG222.JPG
RazorG223.JPG
RazorG224.JPG

Attachments

  • RazorBoxes.JPG
    RazorBoxes.JPG
    112.4 KB · Views: 67
  • Like
Reactions: Jtn605

SOLD Schmidt Bender 5-20 US

Schmidt Bender 5-20 Ultra Short, non-lit MSR reticle. Glass is spotless and the scope has just come back from SB Service Center. MTC elevation knob functions perfectly. Shows some signs of use, which I’ve tried to capture in pics. Tenbraex caps.

Does not come in the mount.

$2100 shipped. PP F/F or Venmo.

IMG_1910.jpeg

Attachments

  • IMG_1909.jpeg
    IMG_1909.jpeg
    392.8 KB · Views: 84
  • IMG_1908.jpeg
    IMG_1908.jpeg
    360.2 KB · Views: 78
  • IMG_1907.jpeg
    IMG_1907.jpeg
    424.7 KB · Views: 80
  • IMG_1906.jpeg
    IMG_1906.jpeg
    344.1 KB · Views: 84
  • IMG_1905.jpeg
    IMG_1905.jpeg
    430.5 KB · Views: 77
  • IMG_1904.jpeg
    IMG_1904.jpeg
    587.4 KB · Views: 82

SOLD XM2010 Barreled Action + Accessories/Parts

Hey All,

I have decided to move on from this project + I need money for my house!

I have a XM2010 Barreled action with Bolt + Accessories/Parts listed below. The barrel is mint! Fluted and in 300 Win Mag. Action is M24 marked and a RRXXXXXC. I bought this from Ilikebmxbikes about 2 years ago on this forum.

Accessories/Parts:
- XM2010 non adjustable trigger (also bought from ilikebmxbikes)
- 3 Remington marked mags + 3 mag pouches
- General Purpose Pouch to match mag pouches
- XM2010 Deployment kit
* includes fire pin assembly, 2 pic rails, misc. screws, cable tie downs, and torq wrench
- scope caps
- extra pic rail from Cadex (yes it works on RAHG rails)
- Otis Cleaning kit

Deployment kit does include an extra extractor claw but was bent at some point. will incluide so you can from the correct one on ebay.

Everything seen in the pictures below is what will be include in the price. I will not break it aprat as I would like the whole thing gone!

Only things you would need to get it the chassis, muzzle device, and some misc. pins and screws to attach the trigger to the action.

Price is $2,500 OBO Shipped.

Payment methods: Paypal, Venmo, Zelle. If G&S is used, Buyer pays the fee.

I will entertain trades but am really looking for cash!

Attachments

  • IMG_8315.JPG
    IMG_8315.JPG
    979.2 KB · Views: 343
  • IMG_8316.JPG
    IMG_8316.JPG
    844.4 KB · Views: 330
  • IMG_8317.JPG
    IMG_8317.JPG
    947.7 KB · Views: 304
  • IMG_8318.JPG
    IMG_8318.JPG
    810.9 KB · Views: 344
  • IMG_8319.JPG
    IMG_8319.JPG
    731.6 KB · Views: 355
  • IMG_8320.JPG
    IMG_8320.JPG
    591.8 KB · Views: 347
  • IMG_8321.JPG
    IMG_8321.JPG
    674.9 KB · Views: 300
  • IMG_8322.JPG
    IMG_8322.JPG
    641.5 KB · Views: 284
  • IMG_8323.JPG
    IMG_8323.JPG
    617.7 KB · Views: 259
  • IMG_8324.JPG
    IMG_8324.JPG
    739 KB · Views: 235
  • IMG_8325.JPG
    IMG_8325.JPG
    811.4 KB · Views: 226
  • IMG_8326.JPG
    IMG_8326.JPG
    738.6 KB · Views: 216
  • IMG_8327.JPG
    IMG_8327.JPG
    465 KB · Views: 337

Garmin Xero C1 Chrono - Ghost shots when cycling bolt (22lr)

Attaching the chrono via the Area 419 Kit to the MDT ACC Elite Chassis utilizing the Rifle Setting and 600-1700 FPS option I’m getting an “analyzing shot” that sometimes reports a reading (without an actual shot). It’s usually between 300-500 FPS range. For what it’s worth I was alone on a square range today. Taking it off the rifle alieviated the ghost shots. Anyone else experience this?


From the range history and a pic of it mounted
IMG_2447.jpegIMG_2446.jpegIMG_2445.jpegIMG_2438.jpeg


Login to view embedded media video of cycling the bolt without any shots or outside variables (my basement, shouldn’t be picking anything up)