I just put together a new gun chambered in 6.5 creedmoor with some pretty decent parts. I’ll post a few pictures.


This is my first gun on a custom action and I cannot get it to shoot ANY factory ammo. I know this isn’t a huge list of ammo but some of it is high quality and I’d expect it to shoot. All of this is shooting 1 moa at best with most of it over 1 moa. I tried some hand loads I had from an older 6.5 and they also shot poorly but my SD was a 3.8 so maybe there’s hope with the hand loads.

Factory ammo I’ve tried
140 grain Berger hybrid target
140 grain eld match
140 grain Serria gold metal match
140 grain federal fusions
125 grain Winchester xp

Things I’ve checked.
-Action screw torque 65 front 45 back per manners.
-Scope ring, base 55 in lbs per ARC
-Rail 25 in lbs
-Head space is good with the go and no go gauges I have checked this multiple times.
-I’ve lightened the trigger to 3oz to try to rule out any shooter error.

Am I the best shooter, absolutely not but I’ve shot plenty of .3-.5” groups in my time. I got frustrated yesterday and cleaned the barrel and put the gun up and grabbed another gun of mine that I know shoots and shot a .33” group at 100. I’m going to work up some hand loads today with h4350, lapua brass, Cci 200s and Berger 140 grain hybrid targets and Hornady ELDMS. It’s kind of disappointing though as I had a Ruger American that will out shoot this gun 10/10 times with factory ammo.

This isn’t a bashing post by any means I’m looking for some solid advice as I had high hopes for this barrel.

Unfired sr15. Has had some accessories mounted on it but it is unfired. Comes with case etc. Only trades would be for a G super duty 13.9 in DDC plus cash. 2900 shipped from my FFL to yours.

#1: Gen III 6-36x56 FFP EBR-7D MRAD. Turrets were updated by Vortex last year. Has very light marks on one side but otherwise perfect. Glasses are perfect. No sunshade. No matches, this was on my wife’s 6ARC bolt rifle. $2100 shipped. SOLD.

#2: ARC M-Brace mount. 34mm diameter, 1.50in high, 20moa taper. $250 shipped. SOLD.

#3: Nightforce Unimount. 34mm diameter. 1.50in tall. 0moa taper. $200 shipped.

Shipping and insurance to US50 is on me. I have the CDG Barreled action and 6ARC ammo+brass in other listing.

WTS:

Zermatt origin action
Vision chassis
Proof 6gt comp contour prefit
Timney hit trigger
Vision Vulcan brake

Has 160 rounds in it exactly, rattle canned but originally black. Just looking to make more room in the safe.

Asking 2750 for the rifle.

Text nine 13 nine 61 three 520

What's going on

Looking for a 308 bolt face ARC short action, Nucleus 2.0, Archemedies or Mausingfield. If you are not a regular I recognize plan for some verification.

Up for grabs is a NEW Atlas Cal bipod with Hawk hill spiked feet. (Comes with facotry rubber feet) On top is a Area 419 QD ARCA mount. Needs a new home! I currently have no use for it. $325tyd

It has come to my attention that someone created an account called @Khsiebbs86333 and took my Avatar & photos. Then he writes to EVERYONE who posts in my thread.

Up for sale is a Like New AMP Annealer MkII. This is complete as it comes from the factory W/ Aztec Mode!

$1450 Shipped! *SOLD*

Selling three bricks of Lapua Center-X that my rifle didn't like. Two are full and one is missing 50 rounds from when I tested it. All same lot. Asking $360 plus actual shipping. Paypal f&f or Zelle. Not looking for trades right now.

With factory Hornady 147's (81501) averaged 0.6-0.7MOA (ES0.5-0.7) groups (~500rd). The MIDAS trigger installed is extra crispy. Weighs ~14.5lbs with everything as pictured.
*************
1) [400] 20" 6.5CM Tikka CTR
2) [1500] Vortex Razor G2 4.5-27x56
-Tenabraex F/R flip caps + metal throw lever
3) [400] TriggerCam 2.1
4) [200] SKB 3i-5014-6 gun-case
5) [500] KRG Bravo chassis
-2-stage MIDAS trigger (crispyyy)
-Fully Adjustable buttpad
-x3 10rd AICS magazines
-x1 5rd AICS magazine
-Spigot Mount with pic rail (connect bipod to)
-ARCA Forend
-Polymer mag release
-QD Sling Mounts

Area419 Hellfire Brake (comes with 1)
Sterk Bolt Handle/Cap (comes with 1)
Spuhr 4601 (comes with 2)
Flatline-Ops TangoSM articulating bubble level (comes with 2)
*************
$3000OBO *you pay shipping

Selling mounts I’m not using:

X2 5/8 non timer SR unused

X1 1/2 non timer SR unused

X2 5/8 CB unused

$125 shipped for each SR

$110 shipped for each CB

Can make a better deal on multiples purchased.

PayPal f&f preferred

Looking at purchasing a milspec Nightforce ATACR 7-35x56. How does Nightforce compare to the SB 6-36 PMii in terms of glass quality and durability? Previous experience has only been with SB 5-25x56 PMii PSR scopes. Thanks for the help.

Mrs. Entitled!

Login to view embedded media

We have about 2 acres of gravel and landscaped area at our place that is constantly growing weeds. I’m fine nuking the area. Wife likes organic. Are there any good options to dump in the 4wheeler mounted sprayer and be rid of em? Mixture of broadleaf and prairie grasses, clover and a bunch of other little bastards

#1: 6ARC Barrel Action: CDG right hand SA with 20 moa rail and 0.441” bolt face (6 Arc). Has small markings on the bolt knob. Fluted body and pivoting bolt handle. 16.5in OBW Med Palma 1:7 6ARC barrel from PVA. 450rds fired though this barreled action. ~~ $1500 shipped from me to your FFL ~~. Both barrel and action are SOLD.

#2: CDG 0.473” Bolt Head and Extractor (308/6.5CM): $150 shipped SOLD

#3: CDG 0.535” Bolt Head and Extractor (6.5PRC): $150 shipped SOLD.

#4: TriggerTech Gold curve 2-Stage Trigger: $290 shipped.

#5: Die: RCBS Matchmaster 6ARC:$140 shipped SOLD.

#6: 6ARC Ammo: 14rds of 80g VT, 11rds of 103g ELDX, 40rds of 108gr ELDM. $70 shipped for the total of 65rd.SOLD.

#7: 6ARC Brass: 185rds 2nd fired Hornady Brass. 62rds of once fired Hornady brass that has been cleaned and prepped. $180 shipped. SOLD.

Shipping and insurance to US50 is on me. I have the Razor G3 and ARC mount in other listing.

Second time this guy has been suspended... How many times wasn't he caught?

This should be charged as rape, not simple assault.

This is what also happens when you state is a single-party leftist/communist un-American travesty... being ruled by a small urban, socialist elite. Which wants (and has built) its own Stasi. And when you hire shit who will do whatever told to keep their jobs, tolerate bad behavior, and make the career path undesireable for all but the most un-qualified candidates. And then promote for DEI instead of merit or competence. The whole organization needs to be dismantled and rebuilt from the bottom up. Too bad that the DoJ probably won't dig into it... They should!

Hope this guy likes buttsex as well as BJ's. Because he needs to go to the worst prison in Mass and get passed around until he dies...

Sirhr

Looking to sell a Remington 700 SA Stainless bolt. It is for a 300wsm. I believe is .532 bolt face. No ejector, ejector spring or firing pin assembly. Came from a rifle a switch over to a .308 bolt

Looking for $200 SOLID

Not Mil/LEO but have access to expert voice through other credentials. Does anyone know of a place that compares to expert voice for price on Leica? Really wanting a set of Geovid pro ab+ but ev has been sold out for a bit and no word on when they’ll get restocked.

Looking at prefit barrels free bore options seem to be numerous. 1 maker is .130, another offers both .150 and .185. I’m guessing that bullet selection drives the choice, but how do you decide when just starting out?

SOLD

Have an IMI 308 galil AR with the box/cleaning kit/ manual and stuff. Always wanted an m40a1. GAP rifles are looking good. Curently have an m24 so an A1 should go good with it right? Stupid idea? What are galils brining nowadays?

I've had a few jags and brushes break lately and I'm looking to get some new ones. One frustrating thing about most of my current set is that they aren't engraved with caliber markings, so the ones that are close in size annoy me when I'm trying to put them away.

I see that Montana extreme jags are engraved, what about the brushes? Anyone know?

I like the idea of the bore tech fancy metal jags that won't show false positives on copper clean outs. Anyone know if their stuff has any kind of markings?

I've had some cheaper sets like Tipton that are marked, but it wears off really quick.

Engraved is the goal, the bigger the better.