Maybe fixing to get a big wave on West Coast .

Well they say it's not illegal so....
Login to view embedded media

I have been doing more testing and toying with 308.

I have been using Alpha small rifle primer brass and CCI 450 small rifle magnum primers.

Rifleis a Zermatt Origin with 20" PVA M24 profile 1:10 twist.

MDT ACC Chassis.

My goal was 3000ft lbs of energy at the muzzle. This was due to a conversation I had with a buddy who just came back from a Safari. The company had a 3000ft lbs, at the muzzle, requirement for any rifle used for plains game. He took a 300wsm.

Powders were Varget and Power Pro 2000mr.

These loads are above book max but showed no pressure signs. I annealed every other firing. I worked the book pressure loads up using annealed starline srp brass.

I forgot to get pictures of the varget loads.

#1- Averaged 2605fps and .30" 5 shot group (No pressure Signs)

#2- Averaged 2614fps and .65" 5 shot group (No Pressure Signs)

#3- Averaged 2627fps and .88" 5 shot group (Very faint ejector mark)

#4- Averaged 2635fps and .55" 5 shot group (Again faint ejector mark, easy bolt lift)

#5- Averaged 2644fps and .23" 5 shot group (Ejector mark and at the very top of the bolt lift it was mildly sticky at the very top)

Power Pro 2000mr was a little lacking in the velocity dept.

My max load of 46.6 grains topped out at 2635 but should have been faster. My thought is that I am not getting complete powder burn. I found some partially burnt kernals in the barrel
.
The 46 grain load was absurdly accurate and had an average velocity of 2615.

My 1moa sticker fell off the hole it was covering so I just shot at the hole.

Looking to replace the handguard in the image and not sure what I need. Will a new handguard come with everything I need to install/mount? Pretty sure I have all the tools needed I just don't understand how the handguard mounts to the upper based on what is in the image. I'm also having trouble removing the gas block., I've loosened the allen screws on the bottom but it only slides about a 1/4". Is there a specific handguard where the Pic rail on the upper mates with the pic rail on the handguard?

This group puts out some banger content.

Login to view embedded media

SOLD

ZCO 5-27 with MPCT3X reticule

15mil locking elevation turret

Area 419 20MOA mount

Flip-up covers

Sunshade with ARD

Original box

Minor nic in the objective bell (see picture, 100% cosmetic)

$3550 TYD lower 48

PayPal preferred will accept G/S buyer pays the fees


SOLD
ZCO 8-40 with MPCT3X reticule

ZCO 20 moa mount

ZCO diving board

Flip-up covers

Sunshade with ARD

Original box

$3650 TYD lower 48

PayPal preferred will accept G/S buyer pays the fees


SOLD
ZCO 5-27 with MPCT2 reticule. SOLD

20MOA SPUHR mount

Flip-up covers

ZCO Sunshade

Original box

Aadmount

$3550 TYD lower 48

PayPal preferred will accept G/S buyer pays the fees







Let me know what questions or offers you may have. No trades at this time.

Thank you for looking

Pics should be in this order
Group, 8-40, MPCT2, MPCT3x

It's not society as a whole, its the fucks in charge of running it,...

Nightforce 7-35 Mil-XT and Spuhr SP-4602. Also comes with the vortex bubble and caps. Comes in original Nightforce box. Only been mounted to a rifle with under 50 rounds through it.

Asking $2800 to your door

New in box still factory sealed. $2400 shipped to the lower 48.

If you were wanting to test a caliber, have a practice barrel, fire form brass or have a hunting rifle for you/the kids-- I have tons of barrels (roughly 50) of varying calibers. All have muzzle threads.
6.5 Creed (26"), 6GT, 6BRA (28"), 6 Dasher (28"), 25x47 (26"). Most of these are cerakoted black. Most are Bartlein, but some of the newer ones are CRB. No other barrel brands. The countours are a mix of m24, mtu, and CRB comp. All the threads are perfect and all are chambered by Stuteville precision for an Impact.

These were my comp barrels (most/all of those will have 1 &/or 2 day match wins on them). There are a couple outliers that will have close to over 3k rounds on them. There will also be a couple that have less than 100 rounds on them. I would be lying if I said I kept notes on all of them and as such I won't be able to tell you which ones have how many. I'm not a magician with a borescope so while I'm sure someone could tell which is which I am not going to take the time to scrub each one to bare metal to determine the amount of fire cracking etc to estimate a round count. I don't run anything hot (creedmoors in the low 2600s, bras at 2800 etc).

None of these were taken off because accuracy degraded-- at a certain point it is simply safer to put on a new barrel than risk it at a match. Some of these (the really low round count ones) were projects or place holders. They weren't taken off because of a lack of accuracy, but a lack of time.

Anyway, if you're interested shoot me a message and I can get you pics of what you're interested in. To make things simple-- $200/ea shipped to the lower 48. Again, I want to be clear that these are all USED barrels with varying round counts.

Have a good day!

McMillan A3 adjustable short action sendaro barrel channel m5 bottom metal 450

I have a new in box Element Theos in BLK Has everything new in the box. $1,950 shipped
I also have a area 419 mount (39mm) and diving board (standard) I'll add for $300 to the buyer of the scope.

Pm with questions.

Thanks

Great condition and perfect glass.
Includes an Area 419 1.53” height mount.
10 mil non locking turrets.

$3800 shipped firm

For Sale. New Trijicon Credo 1-6x24. FFP GREEN MRAD Segmented reticle. 30mm tube. Sitting on an American Defense Recon Tac Mount. Very nice setup. New, mounted as display unit. $950 Shipped!

Here comes ET,...

T3x chassis gun by J&A outdoo, Nocpix ace l35 , and i have either a warrior tripod setup that can go, or a 2 vets QDT v2 with invert 60 head that can go with it. Scope it less than6 months old, be a good package to hit the fields with. If interested reach out and i can go over any questions. The rifle is listed on here separately.

4500$ bundle, shipped to ffl , insured.

Yes i will ship!

Login to view embedded media
The only reason I can remember this guy’s name…



…is this guy here.

Getting too old.

Curious what the shooter is

McMillan A5 stock remington 700 short action sendaro barrel channel $500

As title states. I have a brand new SAC

MODULAR BARREL VISE – FULL KIT. $415​

good day. so i got a custom rifle built with a heller arms EV5 26 inch barrel in 7prc.
got about 40 rounds in it now. have tried 3 different types of ammo that i could lay my hands onto.
hornady precision hunter 175gr, hornady outfitter 160gr, and hornady eld match 180gr.

shot all 3 boxes twice now. hornady precision hunter grouping 1.09 or worse, hornady 160 outfitter grouping .689 or worse, hornady 180gr eld match 1.91 or worse 10 shot groups. any suggestions. the only thing is for sure is that the outfitter rounds dont always chamber. have 6 out of a box of 20 that would not chamber.
second pic is of the second day.

any suggestions would help!!
thanks

TBAC .338 Ultra with Area419 adapter. $1,650 shipped/insured.

I’ve had this several years and put less than 50 combined rounds of .223 and 6.5 Grendel through it. I do not like recoil and don’t have access to long-range shooting locally, so have no plans for a large caliber rifle.

Might entertain trades for high end Binos, Sako/Tikka 6.5 Creedmoor + glass.

If you are in Louisiana and have good references, we might can get this in your hands sooner than later. PM me.

Known to the FB-Lie???

Immigration...too bad hasta la Vista thieves.
Login to view embedded media