Cheers,

Sirhr

Apparently, they're still sorting it out. No real confirmation on the number of casualties but there were some. According to the latest report, there were two shooters. One is in custody and the other was "neutralized" at the scene. Looks like they'll have a presser at about 4pm. We'll see.

Matrix Pro 2 chassis RH Rem 700 SA midnight bronze color with 2 NV Bridges sold

I have a fair bit of experience shooting suppressed, but until recently, I've never felt compelled to own a suppressor. I've always thought that shooting suppressed was more of a pain in the butt than it was worth.

I have, however, reached the point where I'm thinking that it doesn't make sense not to invest in a few. In any case, I have a couple of them coming. The big question that I have bouncing around in my head now is the attachment method.

It was my intention to just go direct thread, but the YHM srx system seems pretty cool. In my research, I've run across comments made by reviewers wherein they noted that the choice of mounting system can affect the sound of the report to the extent that it can make the difference between the report being painful to the ear and not.

Have any of you experienced this?

Trying to figure out where money would be best spent.. I have a V22 with a 20" barrel that was built 5 years ago. I have a decent range to shoot at that minimizes wind however, I struggle with vertical dispersion shooing center x at 300yds. At best, I'm grouping ~ 2.5MOA. Ive been debating on doing a barrel swap but I'm not sure the juice is worth the squeeze. 50 - 200 consistently print sub MOA.

I have tried multiple brands and lots of ammo to include CCI green tag wich had the lowest ES of all but prefomed terribly at 100yds. Best prefomer has been center X and MV's show ~1080.

The end goal is to have a rifle that can shoot a wide birth of ammo well. Im tired of chasing lots and buying bricks that ultimaly will never get used not to mention the availbliliy of Lupua seems to be increasingly elusive.

Open to any suggestions to include re-chambering my exisiting barrel.

-Jay

CHINA ON FIRE! Trade War is killing them. Employees have set numerous factories on fire in protests, shipping docks are empty! Tons of inventory sitting in containers…no cars or people anywhere. Deafening silence…Chinese people expecting martial law in wake of rebellion.

Login to view embedded media
Login to view embedded media

Only 3 months old. Glass is mint and scope has minor scratch from being run in a couple of matches. I have kept the lenses covers on, its a FFP Mil-XT. Asking $1850 shipped.

The owner of the rifle felt it wasn’t shooting good enough. He thinks the steel isn’t good. So, he decided to make his own bushing and put it on a cleaning rod and push it down the bore to check the barrel. He feels there are tight spots in it. I’ll guarantee you that he scored the tops of the lands. Barrel is guaranteed junk now.
Any lint, dirt, carbon particles etc.... will get forced between the slug and the bore and your going to do damage. Worse yet.... a steel bushing was made and to what spec it was made to and your pushing it down the bore. Nothing but a disaster here.

Nothing in his email about how he’s cleaning it, how many rounds on it… how it’s shooting etc… not to mention what the diameter/spec he made his custom steel bushing to in order to check the bore.

Yes.... No warranty being given.

I'm refraining from using very choice words right now!

Located in Cheyenne. Can meet up to the Loveland, CO area for powder/primers.

Powder
Varget 4 - 1# and 1 - 10ish oz $50/lb $220 for all of it
H4350 4 - 1# $50/lb
H1000 4 - 1# $50/lb
Retumbo - 1/2# $20
Hybrid 100V 2 - 1# $40/lb
Staball Match 1 - 1# $50/lb
Ramshot Hunter 3 - 1# $30/lb
Norma MRP 1 - 1# $40/lb
RL19 2 - 1# $60/lb
RL17 1 - 5# $260
RL25 1 - 1# $60/lb
RL10x 1 - 1/2# $25
H4895 8lb jug weighs 6 lbs $250
CFE BLK 1 - 1# and 1 - 14ish oz $80 for all of it
CFE 223 1 - 1# $40/lb
H110 1 - 1# $40/lb
Accurate #9 - 1# $40

Primers
GM210M 2500 - $260
CCI 41 2500 - $250
CCI 450 2900 - $250
Winchester LRP 300 - $15
Winchester WLR 400 - $25

Bullets
.264 143 eldx 300 - $120
.284 139 LRX 50 - $40
.284 145 LRX 50 - $40
.308 165 Trophy Bonded Tip -
.308 175 LRX 100 - $80
.308 130 TTSX 200 - $140
.308 150 TTSX 50 - $35
.308 165 accubond pulled 320 - $150 SPF

Single stage TT diamond curved $225 shipped

manners T4a team elite shell bedded for terminus Zeus with m24/proof sendero barrel channel with m5 bottom metal $950 obro shipped. My terminus fed 308 from aw mags without a hitch with this setup.

Bix'N Andy Tac Sport single stage right handed Remington 700 trigger with flat shoe. VERY little use (kept as a backup and used for single range session to ensure function). I believe specs are adjustable from 4.5lbs down to 10oz. $250 shipped to lower 48, happy to quote shipping to other states/territories.

My other listings:

500 115gr DTAC Blems

Hawkins Tank 6mm Brake

Manners TCS Rem 700 SA RH

Minox MD 80 ZR with Reticle

Saw this in the sky tonight over far Northern Komifornia....not my video but apparently it's Starlink. Hell of attention getter when you don't know wtf!!

I'm shooting the 108gr ELDM from a 6mmGT in a Brux barrel. I tested loads with one particular box to check if my barrel liked the bullet - shot 3x 10rd groups around 0.5-.0.6 MOA group size (0.05 - .06MRAD mean radius). Seemed all good, so I purchased 1000 bullets of a different production lot, and now I'm getting 10rd group sizes around 0.9-1+ MOA (mean radius 0.07+ MRAD) with that lot.

This is pretty frustrating, all I can pin it on is lot-to-lot variation in the bullets - the 1K I bought coming from a lot where, for whatever reason, the quality of the bullets is lower.

Anyone else seen a degree of lot-to-lot variation like this?

If that's the problem, what can be done about it? Really hard to test a production lot before buying the same lot in bulk with the market conditions these days

***SOLD***Area 419 Tactical One-Piece Mount 34mm 1.54” (39mm) height with the small and low diving board w/box. I bought 2 but the cantilever version will be preferable for my SP10. $410 new. Asking $310 shipped.

Does anyone have any experience working with Zero Dark Precision? Im looking for a gunsmith to chamber and install a barrel as well as do some machining on my Remington 700 to turn it into a M40a3, just looking for a good gunsmith to do it and liked the fact that Zero Dark is local to me. Thanks in advance

Posting this for a friend.

Read the site rules. Selling for someone else is not allowed.

For those using Zoom for video conferencing, etc., Apparently there is some major outage going on right now. Perhaps DDOS, perhaps something else. I guess it will be a while before it comes back up.

I Have factroy sealed 8# H1000 and 8#Retumbo .They are dusty and have been on the shelf a long while On the scales it says RT weighs 6.1 pounds and H1000 is 6.3. I'm not sure if my scales are correct but I do know they are still factory sealed
asking $375 shipped each incase my scales are correct and I got shorted from the box store I bought from.

H1000 OS SOLD TO @Smack308

retumbo sold to @Smokenaces

Pic in the story...

https://www.fox4news.com/news/wilmer-hutchins-dallas-school-shooting-tracy-haynes

Login to view embedded media
Ummmm... interesting declassified documents!

Sirhr

I have two Hawk Hill 6mm barrel blanks (Marksman Contour - 29" - 1:8 twist) - $575 for both, shipped to your door.

Feel free to message me with any questions you may have. PayPal FF, Venmo, CashApp, or Zelle.

Login to view embedded media

I'm not wild about bribing criminals, thats like countries paying the Vikings or Mongols not to attack them, and a sign of weakness. I don't like it at all.

However, it might be cheaper and more realistic than having ICE round them up because at the current rate, they're not being captured and deported at near the rate they're reproducing and multiplying.

I'm just afraid it will be large amounts of money spent with half-ass results. How about arrest illegals and confiscate and sell everything they own as an incentive to leave on their own.

So currently have Leupold MK5 5-25, and an Arken 5-25.
I have $1500 available, I want something better than the Arken. Just don’t have quite enough for another MK5.

What’s the recommendations?