Like New Manners TCS Gap camo
Sold!

Gets good about 0.56
Queen thought she was gonna establish dominance


Login to view embedded media

Anyone know where to buy a sunshade for aGen2 razor 56mm/ been looking and all i find are diamond back and viper ones.thanks Stan

I’ve got more of these coming but my latest shipment just had 1

Manners LRH
Long Action Remington 700 & Clones
Hawkins M5 DBM Inlet
Proof Sendero Inlet
1” Pad
1 rear stud 1 front stud

Elite Swamp

$950 Shipped

SAI Optics SAI 6 1-6x24mm .1 MRAD FFP Rapid Aiming Feature Riflescope RNG16-T170-C10​

ATI is the parent company and also makes Tangent Theta and Elcan. This scope has sat on a safe queen and I've sold the rifle and decided I do not have another use for the scope at this time so looking for a good home. This is a superb optic that has an outstanding eyebox and excellent optics for both near and far. Comes with original box, paperwork, Tenebraex caps and ARD device. One of the best 1-6 LPVO's on the market. Scope is in excellent condition, I cannot find a mark on it, not even from the scope rings.

More details here: https://www.eurooptic.com/SAI-Optics-SAI-6-1-6x24mm-Rifle-Telescope-RNG16-T170-C10.aspx

Sold $975 shipped via USPS Priority - PP FF

Brand New- Defiance Deviant .308 SA R/H
Black Nitride-
AW Cut
Faceted Bolt Shroud
Will post pics tomorrow.
1475$ Shipped.
Any questions let me know.
Thanks.

I just recently purchased a RPR 338LM. I am looking to a scope for long range target. My LGS suggested Trijicon Tenmile 5-50x56mm Extreme Long-Range Riflescope, SFP, 34mm. Do you have any recommendations $2,000. Thank you in advance.

So the next project was a dp-28. Fairly cut and dry once you can source the semi auto conversion parts. This ended up EXACTLY how the Russians fielded it.

I hadn’t shot the handguns for awhile and all the Eli Dicken talk got me to wondering, how well can I shoot my three primary 9mms?

So I set up a little test, 10 shots from concealment, back to the target, draw and no more than 3 seconds to shoot the first shot, no more than 10 seconds for the next 9 shots. 15 yards, 20 yards, and 25 yards. 115 grain FMJ but different manufacturers.

G19, 15 yards



10/10 hits, one in the guts, 7 in the chest, two in the throat. Not easy.

20 yards. Two misses left, one in the shoulder at 2 o’clock, 7 pretty good.






25 yards. A gut shot, 5 good ones, and 2 wounds.

Next up, Glock 34.



P

I spoke to a couple of European Optics companies and I don't fully understand the profit model, but their minimums aren't very big 5-10 pieces.

Probably get to the point where we have the products that interest us from 2-3 optics companies.

Probably just a trial balloon… then again, Orange Man never did that.

Campaign will be based on “Break the Bureaucracy” — a purge of agency and administrative personnel at an epic level.

They are the swamp. Fire 5 million of them… and purge the real problem.

Remember Patco? It’s been done..

Sirhr

Anyone notice this?

I just saw on OANN that Bannon was found guilty of both counts of "Contempt of Congress"....seriously??

I mean how fucking stupid, in many counties you need to show citizenship to own land, heck in many places with faaaaar less to offer than the US opening a bank account or even registering a car without being a citizen has tons of hoops to jump through.

What are y’all seeing ?

Seems like razor core has high ES and hit and Miss accuracy.

Any good mk262 clones

Feminist Christina Ellingsen faces a 3-year-sentence in prison for saying men cannot be women, girls, nor mothers.

Login to view embedded media

Back Just before Thanksgiving I had a L4 L5 bilateral laminectomy / micro discectomy due to a herniation and spinal stenosis / bone spurs. It took almost 2 years of dealing with pain during covid getting injections, ablations etc. and fighting with insurance. After surgery and recovery I had about 3 months of pain relief until dropping to a low position at a 22 match. Felt a sharp stabbing pain / pop in my lower back. Returned to the surgeon, had to do steroids, PT etc. for 6 weeks before insurance would allow and mri. Had my MRI on Monday and reviewed with the DR yesterday. The disk at the same level has fully ruptured and is pushing into the nerves agin, worse this time despite the extra room made by the laminectomy. I am now being told the only option I have is to live with the pain / pain management or to have a complete fusion at that level.

For those whom have been here before, I am looking for some 1st hand accounts on fusion. I have read plenty and lots of articles are stating that there is a very limited chance of returning to work if you do heavy labor. I am a diesel mechanic working mainly on medium duty trucks and busses, as well as a small scale gunsmith / machinist on my own time. If I go through with a fusion will I be able to continue working or will I be forced into a new line of work? Starting over at nearly 50yo dosent seem like the best option to me...

What do ya'll have for me???

Not really a "ghost gun" and not really a 3D printer thread, but a little bit of both.

I live in the greater KC area, and just this week we had some shit bag kill a North Kansas City officer, and he actually did use a "ghost gun". This 30+ year old shit stain shot the cop because he did not want to be stopped for a minor traffic offense. The LEO community (that I am a member of) is currently in morning for a fallen brother.

This man child still lived at home with his mother, and had an pretty good 3D printer setup, the lower was 3D printed, so the news got this one correct. Even if they are asking how did he print an entire gun? A few months ago some kid in high school came in shot the SRO (school resource officer) a few others before he was stopped, the news reported him using a "ghost gun" but sorry news you got this wrong, it was a "normal" firearm with the SN# ground off, so just defaced.

At least they are batting 500 in the past few months.

Now we are seeing people raising questions of 3D printers, and wanting to restrict them. I hate to tell you idiots that people have been making guns out of what ever from the day after gun power was discovered, this is nothing new.

Personally I own a 3D printer and I have made some "gun" related thigs for it. A couple boxes to hold long cartridges for working up loads, signs for the range that gives the yardage....stuff along those lines.

I am really looking to flush out my ideas and views on this "ghost gun" thing. On one hand we have the right to keep and bear arms, and I read that just as the words are written, in that context I am very much in the camp that means KEEP AND BEAR ARMS....so there should be no issue with so called "ghost guns", or for that matter a gun with the SN# removed. On the other hand working where I work I know the law just a tad, and think well we do need some restrictions, felons should not have the ability to own arms, I think we can all agree on that, but it does not line up with the letter of the 2A, it says nothing about you being the next Charles Whitman.

So while I think the people looking to "outlaw" 3D printers has a snowballs chance, and I also think that having the "plans" that you can feed into your printer and make your "gun" is not quite right.......just starting to babble.

What are your thoughts and views, part of this is my thinking part of this is the devil's advocate.

It is so tough anymore, people wonder how someone can print a "gun". Well they are not really printing a gun, they are printing a lower.....what is that.....the bottom part of the rifle, so that was it, yup......what about the rest of it, well all the little parts inside and the barrel itself are all made from metal, that is not the gun, nope. Well that is stupid, yea it is thank your .gov for that one. I have another good one for you....see this credit card with little stamps on it.....yea, that is a machine gun.....what, that is just stupid.....I don't disagree, and see this trigger, yea....machine gun as well.....but that is not a gun.....welcome to the club.

I am so glad I am close to retirement, only a few years left. I hope I can make it that long, I really worry for our young guys.

I cant see any reason for this one.

Login to view embedded media

I will preface this thread by saying these AREN’T for sale , just researching what I found in my stash. Found 500 rounds , no clue when or where I acquired them.
Know they were manufactured by Fabrique National , thinking they are 30.06 ? Have no idea if they are corrosive or non corrosive ? Only 30.06 I own is a Garand in great condition, not going to shoot them through it regardless.
Anyone familiar with these ?

Gen 4 Novekse 10.5 5.56 in Tiger Eye Brown. No accessories included. 2800 shipped for the bare rifle. Will trade for a KAC upper plus cash or a complete rifle with cash on my end. DM for any additional pictures or details. Thanks.

Note: Those aren't scratches by the bolt catch. Just your typical KY jelly.

Selling the rings from my NF. Med height, 34mm. In like new condition, just selling because I’m upgrading to ZCO so I have no need for them. 125$ TYD

Got out of 6.5 last year, since i havent shot a match in a while and just narrowed it down to 223 & 308... Got a 223 tikka, 22 tikka, and a 308 tikka.... but I also have an aero precision 16" ar10 in 308........

Picked up a tikka tac a1 in 6.5 today for a deal I couldn't say no to.... Since im invested in AICS mags, I thought about selling my 308, but putting the 308 into the tac chassis and the 6.5 into the krg bravo and keep it for down the road if I want to shoot matches again. But the more I look at it, the more I want to keep them both!! But then I need another scope............. damnit, decisions.