Yoteski said:

No shame in bowing out for injuries. If my feet got destroyed, I’d have done the same thing. The conditions were just perfect for blistered feet; wet, hot, humid. I tried my best to air my feet out while sitting around waiting to shoot, but with the humidity I don’t know they ever became dry.
I walked away with one very small blister. Lots of prep and a little bit of luck.

Click to expand...

How long were humps on this competition?

The IPRF factory class is an interesting solution. If the rifles available are turn key competitive with custom 700 patterns, that’s hard to beat, assuming similar cost. My angle is looking for the same performance without the months of tinkering to get it to run smoothly and reliably. Other than looking forward to being in senior’s class, choosing a rifle based on class it fits in is not high on my list.

Hotcoffee4all said:

PM'd you

Click to expand...

At the moment I’m trying to sell the entire lot
Thank you

Bump

1911Shootist said:

38.1 oz with the mini arca plate, 36.4 oz w/o

Both weights include action screws.

Click to expand...

The ones I've weighted with micro chassis have been around 33oz
The ones I've weighted without micro chassis have been around 29-32oz

Interesting...

Run the tall test like mentioned and you will understand why its important.

TTT - Price drop on Leupold

Kickin45 said:

I would go 26” barrel. I did 3 builds in a row when I was sure 24” was enough. I regret not going 26”. You can always cut, can’t add!

Click to expand...

I tell people that all the time but some need to learn lessons themselves. What do I know. Only been shooting the 6.5 Creed in matches since 2008. lol

Seriously, @TahoeDust if you go Proof then you will be at 26” anyways as that is all they make for steel prefits and only comp contour.

Blue Sky Country said:

Let them build it. Our terms though: The moment one of them attempts an "honor killing" on a female relative because her love happened to be non-Muslim, we go in, take EVERY single male above the age of 12 and execute them all.

Click to expand...

More delicious irony.

If your "us," "our," and "we" forces ever tried to bring that fantasy to life, American Men wouldn't touch your kids, wouldn't burn your homes, no fake Ghenghis Khan story would be told... but would serve it back COLD on on those responsible, quickly, and in ways that would give you one final lesson in Liberty before you go on to meet your maker.

...and why would they pursue this angle rather than via the authorities? To restore the honor of "honor" of American Men.

Never stop being so GOD DAMNED DELISH, you guys...

Longshot231 said:

I would rather have them move completely out of our country. If they think Islam and Sharia Law is so great then they should move to another country where that is the law of the land.

Click to expand...

Don't take the Boom Bait- the "Sharia Law" angle on the story is perfectly fraudulent... extrapolated from a statement that Community Capital Partners made about Islamic banking.

"Islamic banking principles" are something that I happen to follow myself... though I don't call it that.

I ecourage all others to avoid the riba (usury), punish gharar (financial scamming), avoid risk, never purchase an asset that is fake or made up, etc... etc...

OREGUN said:

Your better half may be trying to blow your face off. Clean the rifle well and then measure the headspace and the “distance to the lands” and the base to ogive length of the loaded ammo you are trying to use. If you don’t know how or have the tools to do that, go to a gunsmith and tell them the story. The fact that you didn’t pierce primers or have hard bolt open is good. The “hard to close” is the camming force of the bolt jamming the bullet into the rifling. That’s not normal in most cases. The fact that it’s happening with factory, ammo means that either something is not right or the gun was designed for hand loads that don’t meet standard dimensions.

Click to expand...

Gotcha, thanks

PM'd you

JerkyFreak said:

Definitely jammed the bullet into the lands. What chamber was cut in the barrel; SAAMI spec or custom chamber?

Click to expand...

It came precut from Proof, so your guess is as good as mine.

Yes. Shoot me a pm if interested.

It’s an upgrade you’d do because you want to, not because you need to.

PRS-JohnB said:

Hey guys. I have an Sig Cross and waiting for a new comp profile 308 barrel from Straight Jacket Armory. I am building a steady hunting rifle. I say that because length plays into the equation but weight does not. So the barrel will be 18” long. I have a young son who shot that rifle last deer season in Federal 6.5 creed amd he did well with it. I was wondering, how slow can I safely shoot 308 ammo. I know he won’t shoot over 250 yards and would like to find something lower recoil for him. Looking at MV only, 2,300fps works all the way out to 400 yards.

Click to expand...

A reduced load for H4895 or IMR 4895 under a Hornady 125 SST is your huckleberry for this. Shoot for a starting velocity of 2500-2600 fps, and a minimum impact velocity of 1900 fps at your maximum range.

They shoot soft and despite the reduced loads are often very accurate.

In that specific situation, you need to remove one set screw and loosen the second one installed. Then, tighten the shroud on the pin completely and back it off three quarters to one full turn. Secure it in place with one set screw then reinstall the second with a small amount of blue Loctite.

If you run into any issues, email me directly and I'll get you what you need: [email protected]

Reduced $1800

918v said:

We’re talking optics. Consumers aren’t going to tolerate a 30% price increase.

Click to expand...

Because we didn't tolerate Vortex's MSRP and consequent street prices increases last year, or ZCO's increases, or 30% chassis price increases since 2021, Powder prices jumping 25%, etc.?

If everyone has to raise prices, there's nowhere else to take your business. You will tolerate it, because you'll have no choice.

I have the 6 ARC but also have a 6BR barrel on my AI. Just a little more speed (2890) with the 105 hunter vlds.

hafejd30 said:

No idea as it has the thermal on it currently so that ups the weight.

The B14R stock is decent from factory

Click to expand...

That another thing I like about having a bravo, i could put a bridge, and get a clip on thermal, for another small game night rig, or if my wife wanted to go.

Dead said:

Anyone planning on a race this season? I'm taking my twin daughters to Vegas in Nov. for the 21th birthday they Love the F1 too..
Just waiting on the tickets.

Click to expand...

Considering Miami but probably won't happen.