Maurygold said:

So you have the IP trickler?

I've seen a few v2/v3 hit the PX the last few months. I think there was a v2 thst sat for a few weeks.

Click to expand...

No, I have V4.

I had a V2, and it sucks. It is nothing like the V3

And last I heard Paul quit selling the electronics and the trickier by themselves

JRBullock1987 said:

11 firings.
Alpha munitions 6.5cm OCD LRP brass
Ive Annealed every firing. Now theres these wonky ridges on the insides of the necks and can feel them slightly on the outside but theyre not as pronounced as the insides are. When I resize I always full length size using the sac die with the expander mandrel inside so its all in one step. Does anyone know what causes this? And how to avoid this in the future? My other lots of brass dont have them at 5 and 4 firings.

Click to expand...

I've seen the same kind of thing on the inside of my brass necks, but not near as pronounced. I've never seen or felt anything on the outside of the neck and none of mine have looked like that right after firing. After firing, it just looks completely coated with burnt powder residue.

I do anneal after every firing and clean the necks outside with some steel wool, then lube and size just the outside of the case without cleaning the inside of the neck. After dry tumbling, to remove lube, I then use an expander mandrel to expand the necks and I always get some of that. Since I don't clean the inside of the neck, other than what the dry tumbling does, I figure what I see is just from the residual powder residue that the expander mandrel is rubbing on. What I see appears to be so thin, like in microns, that with the residual lube from tumbling it just doesn't seem to have any affect.

theLBC said:

Click to expand...

Block Indian student and work visas. Needs to be done anyway.

fdkay said:

Well, you don't say what length, but this is a very decent handguard. I have one and am very pleased with it.

Guntec USA Ultra-Lightweight Thin M-LOK AR-15 Handguard - Black - 15"

The Guntec USA 15" Ultra-lightweight Thin Handguard tightly fits against your MIL-SPEC upper receiver providing a monolithic top rail for your rifle.

www.primaryarms.com

Click to expand...

Thanks I have a 24in barrel with a +1 gas tube. The longer the better

akmike47 said:

Someone doesn’t understand you can know how boomers work and not be part of their bs.
View attachment 8740760

Click to expand...

Yawn…

Snuby642 said:

That sounds good.
Could you expand on the preparation of the cucumber salad any?
A friend gave me this and think it will work?

View attachment 8740684

Click to expand...

Asked my wife and she says it’s basically the Ikea recipe she saw online, but instead of just one type vinegar she uses a mix of 2 parts rice wine vinegar and 1 part white wine vinegar, and then adds a tiny little bit of filtered water from our sink tap To “mellow it out” a bit.

She does add a pinch or two of both sugar and salt, and we just use regular dried dill out of the spice drawer unless we happen to have some fresh from the herb garden.

It balances right by the barricade stop

Maggot said:

Note the stamp.$00.06.

Click to expand...

yes, 1968 when you could get a full size candy bar for a nickel and you could pull a bottle of soda out of a vending machine for a dime.

Guys while interesting how you make due lets try to keep on topic. Just the mere fact you’re discussing what you are makes you old fucks as young fucks don’t think in the same terms as “we” hence in 10-20 years this ponzi schemes will all collapse now alternative for which politicians are fighting is that young fucks disappear first through war.

supercorndogs said:

That begs the question, did you find a Cronus for a great deal, or an Ares ETR that's not.

Click to expand...

We're talking the ETR G2 here so maybe it's up there with the, now older (totally antiquated-just kidding), Cronus G2.

If that G2 ETR is anything like my Ares BTR G3 2.5-15x50 is then it is likely very impressive in this space of rifle scopes.

I'd like to compare myself to see the differences which I suspect have become very close.

Ttt

theLBC said:

if somebody has time to watch this, please tell us what he is saying...

Login to view embedded media

Click to expand...

I don't have time but know a little bit of what he found. That golfcourse assassin was cia and should be the missing link between the feds trying to kill Trump.

Yes sir

I'd buy both and another gun to put the extra on

CCi is not know for being the most consistent, That said every rimfire is unique in it's preferences. If it works for you then shoot it. Only other suggestion is to try the SK and Wolf brands, their match stuff is pretty good

culater said:

For you guys using the ar15 platform. I looking to upgrade my hand guard to a free float one. Any suggestion without braking the bank. I don’t mind if I had to but like to keep that cost down.

Click to expand...

Well, you don't say what length, but this is a very decent handguard. I have one and am very pleased with it.

mikeinfwa said:

View attachment 8740696

Click to expand...

Wonder where @Slash0311 ranks on that one. I'll venture a guess, right in the middle.