Hello for sale I have a LMT MRGG MWS in limited edition OD green. This is a 14.5” 6.5 creedmore with a pin and welded surefire socom break. Rifle is brand new unfired. Asking $4200 OBO. Please no trade offers thanks

Grab these before the huge price increase!

VECTRONIX SHOOTING SOLUTIONS VECTOR 12x42 Rangefinding Binocular w/MSR-DMR Reticle 917238 $2,899.00 https://cstactical.com/vectronix-vector-x-rangefinding-binocular/

All the specs here: https://www.vectronix-shooting-solutions.com/products/vector-x/

Hi friends,
Selling upper receiver build shot it with 120 round like new, barrel shot good 168/175 smk bullet 1-1.5 MOA, better Shooter
Cosmetis scratch, spray paint the barrel matte black
whats on it:
Aero M5 upper receiver
13" centurion CMR arms mlock rail
16" wilson combat barrel 1-11.25 twist
Wilson combat 308 low mass complete bolt carrier group nickel boron
Wilson combat muzzle brake, gas block and gas tube
No charging handle included
selling for $800 ship
Payment accept,
Venmo,zelle,palpay
any question 310-357-6026

HI friend
selling my brand new scope everything inside the box and scope mount.
SCOPE $1500
SCOPE Amount $200
Accept payment:
Venmo,zelle,paypal
any question 310-357-6026
thanks

Hello all,
Wanting to sell my Trijicon ACOG TA02 with Red Crosshair Reticle With Top Mounted Trijicon RMR, Larue Mount and Tennebrex Killflash. Asking $1450 shipped and insured!

Thanks for checking it out feel free to reach out with any questions

Hey guys,
Selling a mounted but UNFIRED Bartlein carbon fiber barrel with surefire 3 prong. Pulled this off a brand new action that I’m repurposing. Asking 900 with the SF. Ready to be mounted and timed to a new action, should be a fantastic shooter.

Hide special, order a new one from our site and request the Tenebraex caps in the notes and we send them you a set for free!

Vortex Razor HD Gen III 6-36x56 MRAD with Free Tenebraex caps https://cstactical.com/vortex-razor-gen-iii-6-36x56-ffp-ebr7-d-mrad/

Vortex RAZOR® HD GEN III 6-36X56 RIFLESCOPE​

Built around the perfect balance of magnification and field of view, the Razor® Gen III 6-36x56 FFP delivers the resolution and contrast you need for long-range, tactical shooting. To get the absolute most out of the first focal plane reticle, the EBR-7D presents a clean sight picture while still providing ample wind holds and ranging information. Round it out with a rugged build and you have the long-range, tactical solution you’ve been waiting for.

Leupold Mark 4HD 6-24x52 PR2-MIL - 183823 $1,499.99



Call 916-670-1103 for package deals

Is diopter focus required for parallax correction? I have apparently reached the age in which the proper diopter setting is just beyond the available diopter adjustment range. Can one still adjust out all parallax error without a proper diopter setting?

Benelli M2 Tactocal LE 12 gauge shotgun. 18.5” barrel that will accommodate up to 3” shells. 5+1 semiautomatic with pistol grip stock on rear.

$1,100 Shipped OBO

PayPal Accepted

New KRG bravo for Tikka T3X actions. Takes AICS mags, Sako green color. Comes with the but hook cover as well. All factory accessories included. Bought about a month ago direct from KRG. $325 shipped.

Payment via PayPal F&F, Venmo, Zelle, USPS MO.

Long post if you care to read

Summary = This thing is freaking rocks

I had the privilege of testing the new March 5-42 Gen 2 PRS edition over the weekend, and I wanted to share my experience with you. Upon arrival at TX Precision for a train-up day, I was immediately handed the March PRS Gen II for evaluation. My initial impressions were overwhelmingly positive.

I decided I would mount this scope in a spare mount I had with me. After ensuring my zero with my existing optic was accurate, I encountered significant mirage issues due to the conditions of the day. This is where the March PRS Gen 2 truly stood out. Upon comparing it side by side with my current setup, the difference was night and day. The March scope cut through the mirage effortlessly, even at full power, which was a game-changer for me. In a move I would normally consider too risky, especially before a match, I decided to switch my perfectly zeroed optic for the March.

Remarkably, it only took two shots to re-zero. The real test came when I aimed at a target approximately 775 yards away. Despite the challenging conditions and my initial apprehension, the clarity and performance of the March PRS Gen 2 were undeniable. NO WAY would I have been able to see exactly where I was hitting with my previous optic in that mirage without freshly painted targets. The March made this as if you were shooting in perfect conditions on a partially cloudy day. To say I am impressed is an understatement.

In summary, the March PRS Gen 2 exceeded my expectations in every aspect. Its ability to perform under challenging conditions has made a significant impression on me. The field of view and real usable magnification range is second to none. It's everything you want in a scope and nothing you don't need. From the reticle (FML-WBR) to the markable turrets (no more stickers that dont line up), this thing is a home run! I watched more bullets hit targets than ever before, especially given the conditions we were faced with over the weekend.

If you don't know who March is... You will! I expect this scope will take over a huge portion of the PRS market. You don't have to take my word for it. Next stop is the OKIE SHOWDOWN. Find me and get behind it... Seeing is believing!!!

This is going to be a game changer for you rimfire guys too… The clarity of this scope is unmatched!

Assorted optics mounts are getting cleared out of my box o' extra stuff. (It's a big box with more treasures to come later.)

Badger C1 Max 36mm 1.54 20 MOA Blk - $250 (I can't remember if this has even been mounted)
Badger C1 30mm 1.7 Blk - $225 (used)
Badger C1 34mm 1.7 Blk - $225 (used)
Badger C1 34mm 1.93 Tan -$225 (in box, new)
Badger C1 34mm 1.93 Tan - $175 (potentially used but maybe not, no box)
Reptilia ROF 10mm RMR Riser FDE - $40 (NIB)
Reptilia ROF 34mm 90º T2 pattern Blk - $100 (new but open in box)
Reptilia ROF 30mm 12 o'clock RMR Blk - $100
Arisaka 1.7 T2 Mount FDE - $70
Unity Fast Riser Blk - $80 (sealed in box)
Unity Fast Riser Blk - $75 (sealed in bag)
Unity Fast Micro FDE - $160 (seal broken)
Zero Compromise 36mm 1.5 6Mil - $275 (comes with short diving board)

New opened HFB x Shaw Shiv $450 (unused)
MKC Stoned Goat Ultra $550 (sealed)

Prices are shipped, will package for less.

It was on my 6.5cm hunting rifle, but I want something lighter. Scope is in good condition and functions great. I've shot it out to 900 yards, and it tracts like it should. It has some light scratches on the objective lens that can be seen at the right angle, but they don't effect the clarity.

Locking windage and zero stop can be set under zero on this model.

$950 Shipped Insured

Just PM me, don't make it easy for scammers by posting "PM sent".

CZ 457 MTR like new. 20 inch factory barrel. 150 rounds fired. I've got too many 22s and need to sell one.

• DIP Inc 30 MOA scope rail
• Area 419 Bolt knob
• YoDave Trigger Spring
• Factory 5 round mag & 2 (10) round CZ mags

Comes with original box. Bipod not included.

Would prefer to sell locally in Fort Worth, TX area but will ship on buyers dime. $875 local sale. Add actual shipping costs for out of area.

Manners NIGHT STALKER
Rem 700 & Clones SHORT Action Inlet
Proof Sendero Barrel Channel Inlet
Micro Chassis (for M5 bottom metal)
2 Flush Cups Left Side

I did not place my order with the EFR as the majority of people I know use a thermal scope and not a clip-on. This can be purchased from Manners for $150 if you want to run a clip-on

$1600 shipped

1 - ELITE BLACK & BLUE
2 - ELITE DISCO TOMMY BAHAMA
3 - SOLD

Manners LRH
Rem 700 & Clones Long Action Inlet
Proof Sendero Barrel Channel Inlet
MCS Micro Chassis
2 Flush Cups Left Side
1" Pads
13.5" LOP

$1230

1 - SOLD
2 - ELITE BLUE ON BLACK
3 - ELITE METALLIC GAP

Manners LRH
Rem 700 & Clones Short Action Inlet
Proof Sendero Barrel Channel Inlet
MCS Micro Chassis
2 Flush Cups Left Side
1" Pads
13.5" LOP

$1230 SHIPPED FIRM

1 - SOLD
2 - SOLD
3 - CUSTOM ELITE ORANGE & DARK GREY
4 - SOLD

Manners LRH-TK
Proof Sendero Barrel Inlet
Micro Mini Chassis for Factory Bottom Metal Inlet
2 Flush Cups Left Side
1 Front Sling Stud
1" PAD
$1200 Shipped

1 - ELITE WASTELAND
2 - SOLD
3 - SOLD
4 - SOLD
5 - SOLD
6 - SOLD

Manners CS1
Rem 700 & Clones Short Action Inlet
Proof Sendero Barrel Channel Inlet
MCS Micro Chassis for M5 Bottom Metal
2 Flush Cups Left Side

$1300 SHIPPED FIRM

1 - ELITE BLUE ON BLACK
2 - ELITE BACK N BLACK
3 - SOLD
4 - ELITE CUSTOM RED & GREY
5 - ELITE SWAMP

It finally happened. I've tried to do this for months, and the fourth or fifth time was the charm between weather, work conflicts and methodology problems.

First, huge thanks to Ben of Roaming Shot in Slaughter, LA. Ben runs the best 1,000 yard range in the region that I'm aware of - air conditioned with an expert and a work bench close at hand.

As is known, I'm a fan of the 6.5 Grendel, and I own a few examples of it - over the years, between builds and group buys and so forth, I apparently made enough of an impression on Mr. Craddock that he named a run of barrels after my likeness. I have no interest or commission from these, and it may have been a shrewd business decision on Craddock's part to get me and my friends to buy even more. It worked - then Murphy's law kicked in. The initial barrels that shipped had a problem from the factory. When they realized the issue, Paul proactively contacted customers, got them back, and replaced them.

So, getting mine built took a minute longer than I'd hoped, but the wait was more than worth it. Between me, my sons and our hunting buddies we ended up with three sets of twins - (2) 13.9" with a .625 thickness Pangris Mod 1's built on Thunder Ranch edition Aero matched sets, (2) 18" .750 fluted RTR's that are rebarreled SOLGW rifles, and (2) 14.5" .750 fluted Pangris Mod 2's, one built on a Battle Arms Ultralight matched set, one built on an Aero green anodized matched set, both with Smoke Composites furniture.

To make a long story short, my first couple trips to my home range were unsatisfying. I have an SWFA SS 20x I use as a reference scope, and I couldn't get the type of group I expected based on my prior experience with Craddock. I'd have a three shot clover and then I'd throw one or things would open up. One method problem was rushing - with one scope, once I dialed in "ish" at 50 and moved to 100, the barrels - particularly the skinny ones - were just not producing the results I hoped for.

So today, we used multiple reference scopes and shot others in between, i.e. they cooled down for at least 20 min between strings. The result, praise Thor, was excellent. Ben proved all 6 barrels were shooters. We started with Hornady 123 ELD and it provided 1" or less in the first 4 rifles. My BAD 14.5" eats ELD-V 100 gr and that also went MOA or better for 5 shots. I was very happy in general.

Naturally, number 6, one of the 13.9" .625s did not cooperate. As a matter of fact, with Ben behind the trigger, he was vocally surprised at the size of the groups, so we let it cool down again and shot some other stuff - and then printed about 10 shots that were the worst of the day, probably a 2.5" vertical string, and over an inch wide. We decided to let it cool again and then try another type of ammo. In the most significant display of ammo preference I've ever seen, 30 minutes later it put 5 rounds of Nosler 120 gr into about half an inch. Pictures labeled "Ammo matters" are the same gun back to back. I would not have taken that bet, but I watched Ben put Noslers through the same hole twice. I had been ready to throw that rifle in the river on previous trips. It further reinforced to me that it takes not only skill but time, equipment, various ammo and the physical resources to really determine what a rifle can do.

I'm happy to say we also ran my sons' Craddock bult AR-10s which I had about given up on - to the point I offered them for sale because we couldn't get them to run reliably with a can - but dual ejector bolts have turned them into boringly reliable hammers. To be clear, he built the uppers on my parts to my spec previously so I got what I asked for. The Shilen barrels he turned for those have always been laser beams.

Last but not least, we played with the Athlon Cronus CL35 640 and it continues to impress. This unit has a built in laser range finder, ballistic calculator, 10 profiles etc etc - but what had me baffled is it has yet to require zero'ing across multiple rifles to be minute of pigyote from the word go. I need to work up a precision protocol and determine reliability and so forth - but - in short, I'm sold. I put it in front of my 20" Noveske with a VX6 HD 3x18 50mm and a 12.5" Noveske with a VX6 HD 1-6 with a 30mm tube and it shot dead center with the 1-6, about 2" high with the 3-18, and then did it again cycling on and off. Very, very impressed.

Solid day at the range - thanks to Paul Craddock for building me some of my favorite guns, thanks to Ben of Roaming Shot for building a 1000 yard range and being so generous with his skill set, and thanks to my sons and hunting buddies for the loaners so we could put lead through paper. Oh, and to Athon for the T&E unit, although I don't think they are getting it back at this point.

Due to the nature of the range, target photos are with a cell phone through a spotting scope, apologies for the quality there - but - I'm satisfied that with a little more effort re: ammo selection and break in, they should all hang with the best of them.

I have a Sage Green GTAC Grip Module, slightly used in excellent shape. Comes with the modified factory skins to make it look factory.

Sold the AI this was on.

SOLD Shipped/Insured CONUs

PP F&F or Zelle

Accuracy International AXMC New complete bolt with large firing pin.
Ready to ship
*Do not post in the thread , if you have a question or want to buy it just message me to avoid being scammed . I will not reach out to you first .
No Trades Needed
$800 shipped ,Zelle or Discreete PPFF

I have (2 sold 2 left) 50% off certs. Date of match was end of April. Once sale is complete, you will receive the original picture. Attach the picture in your email along with product name to redeem.

$75 each

I can do Venmo, Paypal F&F, Zelle.