6.5 Cal Strike Without Warning Muzzle Brake. I have 2 of them and swapped tuners. If you want an all black TMB setup just ask and I can swap. But I like the look and it blends in well with a stainless barrel. Comes with wrench. Asking $175 shipped.

Remington 700 pattern, SA. Taken out to the range 2 times. In brand new condition and will come in its original box. Had a grand plan to use this in nrl hunter but am building in a different direction. Great chassis but have no use for it.

Seems the price on these has gone up, but will sell based on what I got it for. Asking $500 shipped to you.

Like new stone glacier de haviland pants for sale.
Medium is too big for me.
$130 shipped

ZCO 5-27 with MPCT3X reticule

Area 419 20MOA mount

Flip-up covers

Sunshade with ARD

Original box

Minor nic in the objective bell (see picture, 100% cosmetic)

$3550 TYD lower 48

PayPal preferred will accept G/S buyer pays the fees



ZCO 8-40 with MPCT3X reticule

ZCO 20 moa mount

ZCO diving board

Flip-up covers

Sunshade with ARD

Original box

$3650 TYD lower 48

PayPal preferred will accept G/S buyer pays the fees



ZCO 5-27 with MPCT2 reticule. SOLD

20MOA SPUHR mount

Flip-up covers

ZCO Sunshade

Original box

Aadmount

$3550 TYD lower 48

PayPal preferred will accept G/S buyer pays the fees







Let me know what questions or offers you may have. No trades at this time.

Thank you for looking

Pics should be in this order
Group, 8-40, MPCT2, MPCT3x

Used rmr for sale. Pulled it off my staccato c2.
Rmr 07 6.5 moa dot. Functions as should.
$375 tyd.
PayPal f&f

Hi all,

After my first and mostly successful foray into custom bolt actions with my 338 Lapua Improved build, it's time to start the next one. I have decided to build a 510 Whisper bolt action. I was wondering if anybody could help with some questions regarding parts selection for this build. So far, I have purchased the action, which is a Remington 700 footprint Long Action that supports 4.050" magazines.

• Will 510 Whisper cartridges fit in a 338 Lapua Magnum AICS magazine? For my 338 Lapua Improved build, Fritz at Black Canyon Customs machined out the shoulder guides of my MDT 3.850" AICS magazines and I am curious if I would have to have something similar done for these to fit, if at all.
  • Is there any point to using 4.050" magazines that have a max COAL of 3.970"? I see that the 750 AMAX load on SSK's load data has a COAL of 3.620" and a standard CIP AICS magazine allows 3.740". It's always nice to have some extra room to work with, but if it is going to make everything else a pain, I won't bother.
• Are there any chassis-style stocks (like the MDT ACC Elite or MPA BA etc) that accept 4.050" AICS magazines? I have not been able to find any.
  • If no chassis style stocks would work, what stock would you recommend? I would prefer to keep it at or less than $700 if at all possible.
• What length barrel would you recommend? I am happy to SBR the action and go with a short barrel. I was looking at the SSK load data and they are using an 18" barrel. I think this is a bit long for my needs, as I was planning on developing my loads with Vihtavuori N110 and it is a very fast burning powder.
• What twist rate would you recommend for a 510 Whisper? I see that Maker Bullets offers a 1000gr 50 BMG Subsonic REX and a 900gr 510 Whisper Subsonic REX that both have a recommended twist rate of 1 in 10.

Thank you in advance!

Custom Foam Case Insert for the following equipment:
- Garmin Xero C1 Pro Chronograph
- Athlon Rangecraft Velocity PRO Radar Chronograph
- Kestrel 5700 Ballistics Weather Meter
- Calypso Ultrasonic Portable Mini AB


Please select a chronograph and accessories for the case insert:

Garmin Xero
- Kestrel 5700 + Tripod
- Tripod + Charging Cord
- Kestrel 5700 + Calypso
- Gray Ops Bumper Case + Kestrel 5700 + Tripod
- Kestrel 2700/2500NV/3500NV + Tripod

Athlon Rangecraft
- Kestrel 5700 + Tripod
- Tripod + Charging Cord
- Kestrel 5700 + Calypso


Case Choices:
1) Apache 550
2) Area 419 Clear Case
3) Seahorse 56
4) Evergreen 56
5) Pelican M60
6) Pelican 1170



$22 Shipped PayPal F&F USPS CONUS
Send me a private message with insert and case option, shipping address, and I will provide PayPal email.

Package will be shipped day after order was receive.
-Orders received on weekends will ship Monday.

Let me know if you want a custom insert designed.

*Does not include Chronograph, Kestrel, Case, or Accessories. Only Foam Insert for Case.

So I look for this topic in Hunting and Fishing and did not see anything. I have four 223 candidates for this to load. 64gr soft point, 62gr TBBC, 55 and 60gr orange tip. Longest possible shot is 200 yds and likely closer to 100-125 yds. An AR-15 is what I will be using. I have to admit that even though I read about those plastic tip wonders I am concerned about tips breaking off and causing problems.

Well it looks like winner winner chicken dinner.

I’m going to pick up a new dishwasher before tariffs hit.

Also got a lot of emails about cheap ammo. I’m gonna blow my load with @RavenRocksPrecision I have no doubt this is the time to stack deep while cheap


Oh Sage of the bear pit, what moves are you making. Stonks are up!

My daughter is about to start her freshman year of high school and her #1 goal is to go to the USAFA. We spent nearly two hours with her guidance councilor today and she was very helpful and very eager to help my daughter along her way. One thing that caught my attention is that this councilor has never had a student apply to the AFA. To West Point, but not to the AFA. She also divulged that Air Force recruiters in our area are few and far between and often difficult to get a hold of. I am the type of guy that when there is something VERY important that is outside of my knowledge base, I will kick every bush and pull out all the stops to find the information I'm looking for.

My daughter is also very active in our local Civil Air Patrol squadron and just loves it. While CAP has a lot of great resources, I thought it would really awesome to find someone who had acutally been there and graduated from the AFA. We know we are off to a great start but having a bit of guidance as to where to focus, what may give her a leg up and just general questions would be a huge help.

Thanks in advance,
CM

WTS Razor Gen 3 - EBR-7D - MRAD - used but like new condition (see photos)

$2,200 shipped; accept PayPal, Venmo, and Zelle
- any G&S charges or insurance to be paid by buyer

Add ARC M-Mount - 34mm - 1.250" - 0 MOA, as shown, for an additional $175!

When proper Headspace gauges are not available, this is a pretty widely used method of spitballing a sorta-close headspace. It has been used for a long time and is considered a rough cheat code to make sure the HS is in the right zip code.

My concern recently is that we have been seeing ammo quality (consistency specifically ) being all over the place. Seemingly in the last 20yrs it has gotten worse instead of better. Maybe because of 2 or 3 back to back ME wars and the producers not taking time to PM their machines and double check QC processes as much. (?)

Anyway . . . . . . . my point is that I have a literal pile of factory ammo that won't go into correctly headspaced factory chambers.

The worst offender is Hornady but I have a few Federal, Win and even Sig.
These rounds look perfect visually but are too long on the shoulder datum -> headstamp dimension. We have also seen a few that are too short on the opposite of that dimensional spectrum to the point they are inducing ignition problems.

I don't think using such a round with tape on the rear to "set" or check headspace would be "dangerous" but if the sample cartridge was out of spec, it could cause excessive brass stretch.
It could even cause the phone to ring at shops like Wade's to bitch about an out of spec chamber that is actually in spec.

@spife7980 I'm not arguing or trying to bust your chops. Just sharing my personal thoughts based on personal concerns and experience, neither of which proves I'm right. So this post is simply meant as food for thought and a "rumble strip" warning to proceed cautiously for the novices.

One pair of L3I M-Lok Brass Weight Set 4 Slot (13.2 oz).

Spray painted sides and front black, not the best job. More of a function over looks kind of guy.

Asking $75 Shipped

Put together a Aero Solus with a criterion 223 1:7 twist match chamber for a plinker.

Thought I had procured a 223 aics mag during MDT Black Friday sale but can’t find it anywhere.

Which AICS mag is reliable and accommodates long bullets?

Will be used in a KRG Bravo to start with.

I’ve got over 1000 pieces of alpha OCD 1xf 6GT brass looking to offload.

Some loose, some in mgm cases.

.90c each, if you buy in bulk we can chat discounts.

PM for any questions

Ive got over 1000 pieces im looking to get rid of- hornady 6GT GAP headstamp 1xf brass.

.50c each

Shipping price based on quantity.

PM with any questions!

new to the forum, eastern ky and into long range shooting

Lots of weirdness in the world right now, so when you need a break pop in for a daily distraction ‘s

Bergara wilderness pro take off stock.

Rem 700 LA/clone foot print.

Adjustable cheek take off from a wilderness PRO. 300 PRC. Brand new never fired.
Has factory detachable bottom metal and bolts. Fits 3.850 CIP length mag.

accurate 300 RUM 3.850 mag included

300 shipped *. Offers welcome.



Trijicon RMR SPF


Athlon Argos BTR 2. 6-24 Scope. Mil. Illuminated. Like new in box.
Includes warne ultralight rings.
SPF.

X300 SPF


Magpul lightweight bipod. 50* shipped.

Grip pod 75* shipped

Various milspec triggers. (5)

40 each shipped.


1 unknown brand (higher quality) AR trigger 50 shipped.

Mil spec charging handles (2). 25 shipped.

Unknown aftermarket CH 40 shipped.

$699 shipped . In excellent condition.

PayPal FF, Zelle or Venmo

Doing multiple surgeries this year and have got behind on bills. It's time to unload some of my gems.

Brand new in original packaging SBA4 pistol Stabilizing Brace.

$90 OBO shipped to your door continental USA

Whidden FL Bushing Die
Whidden micrometer Seating Die

$175 $150 Shipped

Doing multiple surgeries this year and have got behind on bills. It's time to unload some of my gems.

Very light use near perfect condition. Comes with everything you see in the photos, original Box and scope flip covers. Let me know if you have any questions.

$1450 OBO Shipped TYD in the C/USA.

Doing multiple surgeries this year and have got behind on bills. It's time to unload some of my gems.

Vortex Razor Gen3 6-36x56 EBR-7D Mil. Super light use, near perfect condition. Original Box and all the things you see in the photos.

Let me know if you have any questions.

$2350 OBO Shipped C/USA.

.578X28 IS NEW
M16X1 LH HAS MAYBE 500 ROUNDS ON IT.


BOTH FOR 65 SHIPPED, USPS MONEY ORDER, CHECK WITH HOLD OR ZELLE

If you want just the .578x28, 35 shipped, the M16x1 LH is 60 by itself.