I want something better for my 10.3
These are my top 3

Up for sale are a pair of Bushnell Fusion 1600 ARC 10x42 laser rangefinding binoculars. I’ve had these for about 15 years and they have worked well for everything I have put them through. They still work exactly as they should. Comes with box, manual and Butler Creek front caps. I upgraded to ones with ballistics built-in or I would keep using them. Never had any problems with them. $350 shipped.View attachment IMG_2405.jpegView attachment IMG_2399.jpeg

I am on the hunt for a few parts to update my Remington Defense ACR, please see below:

-Nickel Boron Coated 5.56 Bolt (I have a DLC coated bolt I can put forward

-Lightened 2 piece internal carrier rails

-Remington Defense IC Handguard (I have an early remdef handguard I can put forward as a trade)

-Remington Defense Handstop

-Remington Defense ACR Gas block

-Remington Defense ACR Barrel Nut

-Trunnion Roll Pins (top and bottom)

-Coyote Magpul Miad Grip

If you have any other Remdef Acr parts let me know, I may be interested! Picture for your time, thanks!

Less than 200 rounds through this action. Just buying a left hand version.
Comes with both bolts.
17wsm and 17hmr
20 moa rail
No trigger or trigger pins included

1200 shipped
To your ffl from me, an 07 ffl holder

As title states defiance tenacity short action mag bolt face.
Less than 300 rounds through it (7sst)
Triggertech diamond flat shoe included

1300 shipped

To your ffl from me, an 07 ffl holder

All Items are used and in great condition.

MDT SRS Aluminum buttpad base for ACC Gen 1 $25 shipped

MDT Data Card Holder 2 (Used) $25 Shipped


****BELOW HERE IS SOLD***

MDT Forend QD Weights $40 shipped
MDT Internal Forend Weights (Partial Set - Total of 2) $45 shipped
MDT Data Card Holder 1 (New) $35 shipped
MDT Low-Profile Cheek Piece $22 Shipped

Have 150 rounds on this action. Fireforming 6prcSI
Converting all my rifles to left hand actions is only reason for selling

Comes with triggertech diamond flat shoe
1500 shipped

To your ffl from me, an 07 ffl holder

More Than a Marksman - How and Why Commanders Misuse Snipers​

By Cadet Knox Watson (Spring 2024)
In his third year at the U.S. Military Academy at West Point, NY, Cadet Knox Watson is a specialty staff sergeant major with the U.S. Corps of Cadets’ 2nd Regiment.

Source:
Source pdf:

Have two actions for sale. Finally converting over to left hand rifles.
Both of these come with a triggertech trigger. One has a special the other has a diamond.
Also have the 6.5 max bedded into a manners lrh stock by Kinport Peak Rifles and its for sale

Tt special action is 1150

Tt diamond action is 1250(2200 with manners lrh stock and Hawkins bottom metal)

Prices are shipped to your ffl
From me, also holding an 07 ffl

Got sick of the magazine shelf being an absolute disaster and did something about it. Absolutely love how these Magbins turned out. Lets see your setup.

Ruger Precision
300 Norma Mag
Long Rifles inc did install ( never fired)
K&P barrel, 28 inch straight taper, muzzle is 3/4 x24, 8.5 twist
$2000 shipped to your ffl
No trades

Hey folks. Shot my first PRS a couple weeks ago and i'm looking forward to doing some more. Just started reloading. Was shooting 6.5 creedmoor but i'm transitioning to 6 GT. Looks kind of like i'll be going against the grain by loading 6 GT with H4350, but I have 8.5 lbs of it, so varget will have to take a back seat until i burn through most of this powder.

If anyone else is in the Northern Virginia area or shoots at peacemaker or quantico, or XCAL, HMU.

Let me know if that interest you at all.

Scope is in excellent condition, no marks. Comes with box ,papers and ill throw in a set of 34mm warne rings. G4p mil reticle.
Asking $1050 shipped pp ff, venmo,zelle
Trades
Henderson gen 3
Hornady power trimmer
Fx120i
V3 or v4
Swarovski 10x42 slc

x

Fatboy traverse 3 section, invert 60 - 750
Two Vets Recon v2 (inverted) rrs anvil 30 - 850
Atlas psr, RRS Arca/pic mount - 400
MDT 35 mm x high rings - 100
Warne 30mm meds - 75
Cole tac bino harness and pouches - 100

Hi everyone,


I’m new to the forum and wanted to take a moment to introduce myself. I’ve recently gotten interested in precision shooting and I'm looking forward to learning from the community here. My primary interests are precision rifle shooting and improving both my marksmanship out to 600 yards and gear knowledge.


In the process of building a .308 and working to be as proficient at possible out to 600 yards. I've hunted my whole life, but most of the shooting I've done is 250 yards or less, never needed to shoot further outside of the range. For shits and giggles I've shot out to 800, not very successfully. I was more trying to see what the rifle is capable of. I'm also learning to reload from my neighbor but I don't have anything for myself in that regard.


I’ve already picked up a lot of useful info just browsing through the threads and I’m excited to be a part of the discussions going forward.

What equipment would be best for me to dial in on precision shooting? I'm looking for recs on anything regarding data collection.

Selling this 5.56 Lantac Dragon. It has been used but is in excellent condition. $75 shipped.

Venmo is preferred. Will FaceTime for verification.

Hello from North Georgia (more Atlanta metro area).

I finally have the time (and lets face it, money) to experiment with some longer range shooting I have been wanting to do for ages. It also helps a new range opened up near me that has steel out to 900 yards. I am currently building up an AR-10 in .308 to this end, and already have a bolt gun in the same caliber.

Been lurking while waiting on my account to be approved, but there is a lot of knowledge and information available here for someone new. I look forward to expanding my shooting skills into this new envelope.

I have a Winchester model 70 with CRF that bug holes installed a bartlien 3b barrel on.

I just got through fire forming all the lapua brass I had on hand and I went through and measured each case. This was brand new brass. I loaded the rounds where the bullet was touching the lands using close to max loads for 243 Winchester.

My case length are from 2.010 - 2.030. Some brass has 2 firings on it.

The saami trim length is 2.035. Is it a mistake to trim everything to 2.010 or just keep shooting the brass until it grows more.

Thanks

Reticle is HSR-4. 1 inch tube. Scope is in great shape other than a scuff on the front bell.the rings are medium height Warne mountain tech rings. Asking $335 or trade for these knives:
Spydeco, Blinks Blades Sphinx, Vosteed Ankylo, Vosteed Corgi V, MKM Isonzo hawkbill, CJRB Mini Pyrite

Money +- me/you

I've been reading here for years, but never registered.

I am about as far north in GA as you can get.... a few hours north of Atlanta. Recently, I have retired ( well partially retired ) and have a little more time, but no more money, to enjoy my rifles.

Bought this as a barreled action but don’t need this barrel. ~50 round count. 20” fluted, weight 3lb 3oz. Should fit solus and Zermatt origin. $225tyd

WTS L3 Unfilmed White Phosphor Duals – First Time Seller

Asking $6999 cash shipped and insured via UPS Or if you have trades plus cash I’d like $5k cash and rest in trade.

This is my first time selling tubes. My earlier posts were a little messy—thanks to those who were patient. Just trying to do it right. Specs are in the timestamp.

Built by See The Night. Clean tubes, no issues, in an Act in Black case. Solid setup.

Interested in trades like: • Nightforce LPVO FFP MOA (newer reticle) • Radian ADAC Lower • LMT MRP Upper in .300 BLK • EXPS NV

Please be clear about what you’re offering and how much cash is on top. Not interested in full trades.
Will Facetime and send additional pics and vids.

Please text or call 415-400-nine 8 nine 1