Brand New Never Fired P320AXG PRO. Lightened Pro-Cut Nitron slide with black anodized metal AXG Grip module. Has Hogue G10 grip panels/rear insert and a detachable Magwell. Flat X trigger breaks at 90 degrees. Slide is optic-ready with XRay3 day/night sights. Comes standard with (2) 17rd steel mags fitted with Henning Group alloy basepads. The original case and paperwork included.

I thought I would use this, but I carry my 365 Macro everyday and haven't gotten around to it.

$975 Shipped. Will ship from my local FFL (I’m in Arizona) to your FFL (please provide that FFL name and address). Know you're state laws. My FFL will not ship to questionable states. Will accept USPS money orders or discreet electronic forms of payment.

Pulled off a 300 PRC. It in mint condition. Never been in the woods and has less than 50 firings on it. Bottom metal and action screws included. $350 shipped obo

I think there was a group of us that was super stoked that the 7 PRC would be a adaptation of the 6.5 PRC, at least, I was.

Now that we know that it's not, we can start making one ourselves. I've talked to PVA and they have a reamer ready to go. Brass is easy to find and good quality. F-class guys are pushing 180 hybrids 2900-2925. I'd imagine that's using a long action though. Based on looks alone I don't think it'd be giving much if anything up to the 7 RSAUM or sherman's (SS & SST).

It seems that using a short action will always be compromising when looking at a magnum. I'm hoping this fits my needs until I build a dedicated ELR rig. I've been bouncing a lot of ideas around but I think this is where I'm landing.

What do you guys think?

Has anyone here been running one?

224 Valkyrie / 6.5 Creedmoor / 7-6.5 PRC

7-6.5/w 180 hybrid, 162 eldx, 151 cayuga, 180 hybrid. All set at mag length.

Nightforce ATACR C579 5-25x56 Mil-C . 2 blemishes on eyepiece, blemish on Tenebrex objectice piece. Surprisingly minimal scope ring markings. Glass clean, no blemishes. Lived in MPA mount entire life and ScopeCoat neoprene cover during storage/transport. $2400 shipped

PayPal , Venmo

Selling my used but in great condition swaro slc 15x binos. These come with the outdoors tripod arca mount. Used this in a couple PRS matches
Comes with the box and all the accessories with it
$1450 shipped to your door

Mount has a low round count thru a 338U

Not looking to sell

Ive got a super nice, practically new, 6-dasher with kelbly atlas tactical action, 19" 4 groove bartlien fitted by southern precision, aero precision chassis, teiggertech diamond. This rifle is an absolute hammer, itll consistently shoot in the low .1s at 100 and sub 1/4moa at 200. I have confirmed dope out to 1500yd also. Runs 108 berger at 2760. Barrel has right at 400rd and action less than 100. Includes load data, dope data and 100pcs of 4x fired alpha brass. Dies available if needed. Below is a fresh 5shot group at 100yd with 108berger and varget.


Will take 2700.00 for rifle minus scope or 3300 with 6-24 zeiss. Please check my feedback on accurate shooter under oneraggedhole

Brand new, never used .382 bolt head for Aero Solus actions (.223 / 5.56)

$100 tyd *sold

Used FDE accuracy international AX chassis for a Remington 700 SA rifle. Hasn’t been bedded and all screws are included.

This is used and has some marks here and there but overall great shape.

$1400 shipped

Paypal Zelle or money order

The creedmoor prefers the yellow box, so selling what I have left of these, there will be around 85 left.

$30 shipped

Impact 737R with Kreiger 1.250" barrel chamber by EI (alpha 104 chamber), triggertech diamond trigger (flat shoe), 300x pieces of alpha dasher brass, and Redding type S full length dasher die. Barrel and action has about 1400 rounds on it so its still got some life on it. Barrel has been run with 105s at 2820 and still hammers, just need to downsize how many rifles I have. Brass has 7x firings on it always annealed before sizing. $1500 to FFL

I found what I was looking for - thanks everyone.

Brand new, never used AI AW .308 magazine.

$old

Hey fellas, I have up for sale a new takeoff Krg bxw forend on fde Rem 700 SA. Will include pair of longer m5 bolts if converting from the original bravo type forend.

$50 shipped.



Thx
Dave.
Text 8157627003

Match master powder trickler. Like new. $650 shipped. PayPal or Venmo.

Excellent condition BR-30 with Lilja barrel, tuner and two factory 2013 barrels. Gun is in great shape except for normal handling marks and one spot where the guy I bought it from left an empty 22 case in the box when he shipped it and it marked the stock. Gun can also be bought with a S&B 12-50x56 scope for another $2500. I bought two Annies in hopes I would have time to get back into shooting, but both have sat in the safe too long… PM any questions or trade offers. If you’re local, I have lots of ammo also… $2500

Up for sale is a NIB pair of sig kilo 6k range finding binoculars. Never opened $800 shipped.

Cleaning out my closet and I have a spare firing pin for a Defiant Deviant SA action. $20 shipped.

Like new TBAC Bipod (ARMS pic clamp) with box $SOLD shipped. PPFF no notes.

When I ordered this, I was not sure how much I'd use it, so I left it in its box for a very long time, unopened. Eventually, I decided to open it and go ahead and "mount" it (more on that later) to a new rolling 84" toolbox I kept in my finished/HVAC-controlled walk-out basement. I only used it to mount two muzzle devices (one on an AXSA barrel and one on a PredatOBR barrel). I only ever used the "V" inserts. I never used the "gold" ARCA or Picatinny jaws, and I never used the aluminum soft jaws. Again, the only thing I used were the V-inserts. I kept a microfiber towel between the two gold jaws to make sure they ever touched each other.

To double underscore how little it was used, I never actually mounted it to the toolbox. I have some fancy black MDF that I cut into three sections so that there would be modularity, but those there MDF sections never got mounted to the toolbox, so it was only ever mounted to pieces of black MDF that were not even attached to the top of the rolling tool box. . . . all of that is to say that If I were doing any "real" work with this, I would have had to actually mount it to something that wouldn't move.

Because of the very, very little use and my anticipated future needs for it (which are basically none) what I ended up doing was decided to put this up for sale and ordered a Short Action Customs Barrel Vise for when I need to do barrel work.

This vise is SMOOTH (and it should be for what they cost).

The vise will come with a second mounting base (which cost $150). As you can see in the second-to last picture, there is a corner of the first base that must have been dropped at the Orange factory - it does not affect the use at all, and if you orient it to the rear, you never even see it. When I asked Area 419 about it, they sent me a second base for the trouble. The second base was never used.

The Orange Vises are now $2,000 by themselves WITHOUT Area419 kit and the extra base.

So, my asking price is going to be $2050 shipped fully insured CONUS. I know that's steep, but Orange is located in California, so they're dealing with not just inflation, but also the cost of doing business under that regime.

Lightly used Magpul PRS ar15 buttstock in fde or whatever magpul calls their dark earth color. Made for Ar15s , stock only no buffer tube or spring.
No Trades Needed
$180 shipped , payment via zelle or Discreete PPFF.

6.5CM PRS Build:

- Foundation Genesis 2
- Impact 737R
- Stuteville Precision 24” M24 barrel
- KMW Mk-1 bottom metal
- Triggertech trigger
- Area 419 Hellfire Match Brake/collar
- NF ATACR 7-35 T3 FDE (C662)
- NF Xtreme Duty 1.54” 0 MOA Ultramount FDE (A696)
- Atlas BT47-LW17 Bipod (standard height)
- 2x AICS 308 10rd magazines.

Round count for entire build is 260 rounds, all factory Hornady 140G ELD-M's. NF scope is flawless & comes with original factory box (scope/mount purchased from Horta).

I am willing to part out the rifle and scope separately.

$6,500 OBO. I’m selling due to getting out of the PRS game. Thank you!

Selling my lightly used Vortex Venom 5-25x56 FFP EBR-7C MRAD Riflescope
works great just went in a different direction as far as optics for the rifle I built.
Asking $400 shipped. I do still have the box I just didn't take any photos of it.

Thanks

I have a Used Leupold Mark 4 12-40x60 TMR Reticle plus Badger Ordnance Lightweight frame installed on it. Included also is the Tripod mount. I have the original Scope cover however it will not fit with he Combat Kit installed. I also have a small tripod which i will include but it fits loose onto thsi tripod. The end plate needs to be changed. I sold my night vision so i do not need this spotting scope i have a larger one. Has been sitting in safe for about 5 years, it is used ,I have owned scope at least 10 years. Price $1,300.00. The tripod has one of the clamps broken but still usable. ( this is just a bonus)

18” PVA, 6.5 Creedmoor, 8 Twist, Marksman contour, Nucleus Prefit with shouldered Barloc cut - $325 Shipped conus

Less than 200 rounds on it per the orignal owner. I bought this and never even torqued it down to use it on my action.

Comes with a spacer that should allow it to shoulder to arc actions without the Barloc. (Say should as I never ended up using it)

5/8x24 muzzle threads.

Pm me with any questions, trade offers etc