Elcan Specter 1-4
Purchased used from local shop, didn’t do the build I wanted.

Has 556 reticle

$1400 shipped

Not looking for trades at this time, thanks

Do rim x mags fit in a vudoo without mods?

I have two

One is missing a flood cover

$1100 shipped each OBO

Thanks

Hi folks. Wanted to share a product I started selling a couple months ago called the Light it Up:



The kit is $45 TYD and includes the parts needed to build out 2 of the systems as shown above.

If you’d like to order one, visit Lightituplevel.com

If you have any questions about the kit, feel free to drop them in the comments or PM me.

I’ve gotten quite a bit of feedback over the past couple months and folks seem to really be liking these kits.

-Kyle

McMillan Game Warden 2.0 Defiance short action inlet and ejection port/ Rem700 SA. 450$. Have a Hawkins hunter m5 dbm with Hawkins hunter .308 mag I can add to it for an extra 250$

Zero Compromise Optic 4-20 Tremor 3 10Mil in FDE SP-6002 with matched cerakoted dive board. Original box shown will throw in mkm killflash and scope covers.

Asking $4500 but open to reasonable offers.

Will trade for ZCO 5-27 FDE any reticle no mount.

Shipping included to lower 48. PayPal friends and family.

So I am a brand new AI owner. Just recently purchased a AT-XC and am waiting on the arrival of it to Mile High. Every rifle I own has a flat trigger shoe, and was hoping to swap the original curved AI show for the flat shoe. I was informed that the XC is leaving dealers with the comp trigger, is this true? Also will there be any issue with putting this shoe on the trigger if its not a comp model?
Just a reminder I am new to the AI world, and currently picking up barrels as I go.

Custom Remington 700 M40a3-ish for sale - $2000

I'm selling off a few things that have literally just collected dust in the safe for years.

Remington 700 action blueprinted by Krieger Barrels
25" 308 M24 contour barrel 11.25 twist with badger lug installed by Krieger Barrels
AAC 51t flash hider
Bolt knob and bolt flutes done by LRI
Cerakoted Black
Pillar bedded
Badger 20moa rail with 8-40 screws (not the m40 clip slotted base)
Badger m5 bottom metal
Timney trigger (cant remember which one)
McMillan A-4 stock finish: molded in marble olive, med tan, black

It has exactly 20 rounds through it
You never get back what you put into these custom builds but im looking to get $2000
I didnt plan on selling the rings with it but they are badger .885 rings if you wanted to add them on
I may be willing to part the gun out with a little bit of interest

I have owned my heavy-barreled B14R for a little over a month now and have mainly shot SK Rifle Match. I probably have 500-600 rounds through it so I feel that the barrel is "seasoned" enough so to speak that I can start playing around with ammo to dial it in. Rifle Match shoots pretty dang good but it will occasionally throw a couple.

I wanted to know what ammo my fellow B14R heavy owners have found that produces the most consistent groups. I know it can vary from barrel to barrel but I just wanted to get a good baseline of ammos to try instead of ordering one of everything.

I have also shot Eley contact and Lapua long range and both of them left a lot to be desired. That was also early in the barrel life so I may need to try them again at some point.

Hello, looking for a good bolt action 6.5 Creedmoor to ping steel at 1000-1200 yards. May try PRS in the future, not sure.

Currently looking at the MPA BA PMR PRO II but before I click buy now what else should I consider? I think I heard something about a certain magazine not working on the new ARC action? Is that an issue? Double stack magazines would be preferable.

Is the Delta 5 Pro a contender? Maybe some good barreled action in a MDT chassis? There's so many options out there now I want to make sure I'm not missing anything that I'll figure out after I already have something.

Thanks for any and all opinions. I'll probably go for a Vortex Razor Gen 3 6-36x56, ATACR 7-35x36, Zeiss S3 LRP 6-36x56 or something similar to put on it. Maybe a Kahles K540i if I can find a crazy deal LOL, doubtful.

I just switched over to the Spuhr SP-4007 Mount as the Offset version will not work for my application.

Excellent Condition Spuhr SP-4016 CantiLever Scope Mount for 34mm tube. Zero Cant and 1.5” Height.

These are hard to get as they have been discontinued.

Only $350 shipped

Glock 19 Gen 3 compatible. Uses a chassis system so you can switch grips which are made by Magpul. Definitely going to pick one up. Especially at that price.

Ruger RXM

Magpul Grips

Login to view embedded media
I was waiting for Magpul to do something like this for Glocks.

I have a 21 1/2 inch 1.250 O.D. 12T 22RF Lothar Walther blank for sale. It was chambered and the guy changed his mind so it was cut off. The blank has never been fired $165 shipped

MPA Ultra Lite Remington 700 SA, like new, 9.5/10 for cosmetics.


$650 shipped

Zelle, Venmo or bank draft, no PayPal
No trades please.

New pair direct from Swaro. Comes with original box.
shipped.

Up for sale is a used SA Zeus QC.
Posted it a few months back, changed my mind about selling it but an axmc popped up and I couldn't resist. So it has to go.

Some brass wear marks, but overall in really good shape. About 600 or so rounds on it.

1250 shipped

Vortex impact 4000 laser range finder.


Might be interested in trades for high end optics.

Atlas BT-10 without clamp. Screws included. Lightly used a few times, I prefer the CAL.

SOLD$165 shipped ConUS.

Will post pics tonight

This new AI barrel was bought a few years ago, but it was never. Fits Accuracy International AI AX/AX308.

6 Creedmoor from OTM Tactical (Gradous) - $350 Each OBO

I also have another 6 Creedmoor that was broken in (180 rounds) and then pulled if anyone is interested.

Feel free to message me with any questions you may have. Shipping is UPS insured for $25. PayPal FF, Venmo, CashApp, or Zelle.

This new AI barrel was bought a few years ago, but it was never. Fits Accuracy International AI AX/AX308.

.308 Barrel from OTM Tactical (Gradous) - $350 Each OBO

Feel free to message me with any questions you may have. Shipping is UPS insured for $25. PayPal FF, Venmo, CashApp, or Zelle.

We now carry basically the entire ZCO catalog and have inventory coming in almost daily, but even for something that needs back ordering lead times are very short right now. Give me a call with any questions or if you'd like to place an order.

This new AI barrel was bought a few years ago, but it was never. Fits Accuracy International AI AX/AX308.

6 Creedmoor from OTM Tactical (Gradous) - $350 Each OBO

Feel free to message me with any questions you may have. Shipping is UPS insured for $25. PayPal FF, Venmo, CashApp, or Zelle.

Have an itch for a precision Gas Gun with a nice optic. Have access to range out to 1000 yards. Steel every 100 yards.

Wanting to go with Seekins for the reputation of accuracy, etc

Can’t decide between the 18” DMR in .223 wylde or the SP10 in 6.5cm 22”. I understand they have the 6ARC in the DMR but for what I already have I want to stay with the .223 or 6.5cm.

For those that have had gone down this road or are on it would you recommend the AR15 plateform or AR10? Both, from reviews, are going to give me sub MOA accuracy with match ammo.

DMR $1,800
SP10 $2,800 (worth that extra grand?)

Thoughts? Best bang for the buck?

Can you install a non-quick change barrel on a quick change (QC) action? Looking at the tenon drawings it looks like there are more threads on the barrel for the non-quick change barrel than the quick change barrel. Looks like about 0.25” of smooth barrel left as the bearing surface for the 2 hex screws for the QC option. I saw Gavin Toobe (Ultimate Reloader) build a rifle on a Zeus action where he torqued the barrel to (on a QC action) 90 ft-lbs in a barrel vise using the 3 lug action wrench. His Zeus action had the set screw holes on it. If a guy was going to build a rifle using the Zeus action, and you were not gonna change to a different caliber, is there any down side to getting the QC model? Is losing those extra barrel threads a compromise?

Inherited a classic stainless model 70 with the pos plastic stock.

Don’t need one bad enough to order a McMillan or HsP yet.

Anyone have a post-64 long action model 70 (2-piece floorplate) stock laying around? Open to whatever.