50 round magnum bullet box.

Inflection foam and top plate in a Pelican iM2050 case.

The case will fit standard 308 cartridges up to 338 lapua. Their website states "the case will take a round up to 3.7 inches (recommended closer to 3.3 inches)". I used it for my 7 saum with 190 a-tips. No fitment issues.

$100 shipped

Like the title says, looking for an 18” Proof steel 223 wylde barrel, for AR platform and rifle length gas. Preferably new or low round count. Would also consider other premium barrel manufacturers (Bartlein, Kreiger, etc.)

Let me know what you have, thanks!

Selling a 23” PVA ATX 22 GT Barrel.
I have not shot this barrel, I received it in a trade but Barrel has 150 rounds on it per the Hide member I got it from. There are a few scuffs here and there shown in pictures.

Will come with thread protector and 3D printed tenon protector.

$500 shipped.

We have another comp rifle built out and ready to ship within 7 business days. Built off the KRG Bravo with a Tikka T3X action and a 25" M24 stainless barrel with a 1:7.5 twist. Click here to check out the Tikka Comp Rifle. If you have any questions feel free to call the office at 435-462-1607.

I have a GEN 1 MDT Send It level for sale. I have the Spuhr mount, picatinny horizontal, and picatinny vertical mount that I would include. Will include all original packaging.
Looking to get $185 shipped.

looking to buy a CHAD 6.5mm anyone have one they want to sell? also I would ask, I have seen some for sale. why are people selling them? Seem like that are great.

If you've been wanting to build a new custom hunting rifle as a DIY project but still want a high quality pre-fit capable action. We have Kelbly's Atlas Lite actions in short standard and long magnum. We also have a couple of long magnum Nanooks in stock as well. We can even get a barrel spun up for your build and we can install it or send them apart for you to assemble yourself. Here's a link to the Atlas Lite and Nanook actions, if you have any questions or need help ordering feel free to call in at 435-462-1607.

This rifle is built off a Kelbly's Atlas Lite action with a 20" 1:7.5 barrel chambered in 6 Creedmoor. It's resting in an MDT HNT26 folder chassis with the enclosed for end and ARCA rail. We are happy to help with financing if you need to make payments without interest and the rifle will be shipped when fully paid. Check out the 6 Creed Katana here. Call 435-462-1607 with any questions or help.

Using the Tikka T3X action. We added a 26" Bartlein #13 carbon barrel chambered in 7 PRC. Set it in a Stocky's carbon fiber Ultra lite stocks. This rifle has an Orange and Gray Cerakote job on the stock. You can take a look at this rifle at Tikka Custom Hunting Rifle. You can call 435-462-1607 if you would like to learn more.

Great shape

Includes decent shape griffin rings pic rail screws have seen slightly better days, but still usable.

$425 TYD Price Drop $350

300 Norma mag barrel for AXSR. Factory barrel 27", 3/4 x 24 threads, 1:8 Twist. Round count 186. Break not included. Price $750. Switching calibers don't want it sitting around.

USCG Vet . , X-Professional Photog., retired Texas State employee TDCJ. Been reloading for decades. Central Texas

So I finally got one, mounted it and got to mess with with first hand. It’s super nice but I think I like my chassis better, so I’m seeing what’s out there for trade.

Manners LRH NV with EFR for Rem 700 SA and Clones with micro chassis and Hawkins M5 bottom metal.

Not looking to separate,

Looking for mid range Mil optics, Leupold mk 5 3.6-18 T3 illuminated, maybe other optics, maybe other chassis, or a Dillon press. Who knows, just pm me with what you have

Pm vs posting in the thread to avoid scammers.

I built a 737R 6 Dasher a few months ago and got everything pretty close to where I want it. I took it out to a prairie dog shoot over the last week and experienced my rounds sticking into the rifling after about 100 rounds. A cartridge closed into battery slightly hard which prompted me to eject it, when I did it ejected hard and pulled the case out without the bullet.

I'm about .010" off the lands according to the old school method of finding the lands via the feel of an ejector-less bolt. I started with .015" and experienced more consistent muzzle velocities at .010" and stopped there. Before my trip I shot pretty extensively without seeing any issues. I'm loading off a Dillon XL750 and the dies are on a dedicated tool head. I use the same shell holder slot to seat all my rounds. I'm using Redding type S with a micrometer seating die.

Before my trip I went out and shot 50 rounds at the range and did not clean it. About a week later was day 1 of my shoot and I shot about 50 rounds and experienced my first stuck round. I unstuck the round (very easily) with my cleaning rod and cleaned the rifle. Cartridges were entering into battery and ejected without a problem. The next day I shot about 100 without a single issue and then it popped up again. This time I unstuck the round and cleaned the powder out and put another round in with the same result. I cleared the bullet and have not cleaned it in case the community here suggests I take a look at something.

Is this carbon ring buildup or something else? Should I back off and increase my land jump?

Alright - don't throw stuff at me, but... I searched to find the "stupid marksmanship" forum without success.

My gut is saying yes to my question, but I'm defering to the experts here on the Hide.

So here goes:

Will recoil be equal in 2 different cartridges/calibers if:

1. The rifle is exactly the same - stock, weight, etc.
2. The same powder and charge is used: example H4350 44.2 grains
3. The same bullet weight is used with roughly the same desgin - i.e. eld vs eld or Nosler BT etc.

Example:

6.5 creed shooting 130 vs 270 shooting 130 - using H4350 at 42 grains - won't they both have equal recoil energy?

6.5 creed shooting 100gr vs 6 creed shooting 100gr - using H4350 42 grains - same recoil?

So, what I'm getting at - within reason - bore diameter aside recoil will be equal as long as bullet weight and charge are the same.

Thanks

For sale is a BAE Oasys UTM-X thermal, with full kit from the factory. This was used by a private security company and then sold back. It is NOT stolen government property. No dead pixels, no issues. 2014 DOM with 5.2 software, including the Trace-IR feature. Has built-in full power IR and Vis lasers. Very multi-functional and handy unit.

Includes:

Thermal
Wilcox FTS Mount
Bag
Unit to USB Cable
Unit to Recorder Cable
Manual, CD, and Quick Reference Card
Lanyard & Tie Down
Ocular cover and Eye cup


Looking for $6400 shipped. Happy to answer any questions or provide more photos.

aero comp 6.5 creedmoor 22”, includes a pmag. Rifle only 1400 shipped and insured. Approx 600 rounds on it

800pcs 123 Nosler Custom Comp $200 shipped SOLD

7 boxes of Hornady 130 Eldm SOLD

250pcs Hornady 123 BTHP SOLD

Paypal f/f or venmo preferred.

Lefties, it's your time. The LSS GEN3 is now available for the Remington 700 SA Left handed rifles

Absolutely like new Z8i, I don't see a mark on it anywhere. It's been mounted but hasn't seen a round yet. BRXi reticle.

Bought it as an A Demo from EO over the winter, and it's just not what I need.








My loss is your gain! $2900 shipped/insured, or $2850 ftf.

Trade interests: Something along the lines of a S&B Klassic 2.5-10x56 or 3-12x50 illuminated, Zeiss V4 3-12x56 or V6 2-12x50 with $60 reticle, maybe a Leica Amplus6 2.5-15x56, + $$. Another possibility would be a 10x NL Pure, + some $$ for a 42, straight across for a 52.

Im currently assembling my first rifle based on the Origin action. Planning on using a trigger tech trigger. Just to confirm, the origin has the bolt release built in so I can use a TT trigger without a bolt release. Is this correct?

The good harris with the good adapter, ready for whatever clamp/adapter you want

$100 shipped

Good Morning,

Picked up a rifle over the weekend with the intention of it being a light weight hunting rifle for the deer woods. I'd envision sitting on stand in the morning, still hunting throughout the midday, and sitting again in the evening.

It's a Bergara Carbon Ridge, and I'd like to swap the stock to something a bit more rigid. I'd like to keep the traditional design, and have been looking at the AG Composites Sportsman and Carbon All Terrain.......but, figured this group would likely know of more options, thus the question.

Thoughts on other stock makers I should check out?

Thanks!