Holosun HE510C Green for sale like new, only taken out of box.

Price: $old shipped

I accept PayPal Friends and Family, USPS Postal Money Orders and checks for this one. See my feedback many happy customers.

Like new Leupold Mark 5HD 3.6-18x44 scope. Model # 180726 Has PR1 mil reticle.

Asking $1700 shipped obo

So I went to check out the Gen3 Vortex 6-36 and buy it with a 30% off cert, but I wanted to check out the Leica PRS 5-30x and side by side them.
I expected to like them both about equally, and leave with the Vortex, which I did, but I really liked the Leica glass, more than I thought I would.

Everything I read comparing the two, gave the nod to the Razor as being better glass. The Leica was quite a bit brighter, and I liked the thickness of the Leica reticle a bit more. I think the Leica was useable down to 12x, whereas the Razor needed to be at about 25x to see the little sub tensions. I like the Razor turrets a bit more, though I love tool-less turrets.

I had a Gen 2 4.5-27 Razor, and my memory thinks that one was brighter than the Gen 3. I must be crazy lol.

The Leica reminded me a lot of my Kahles 6-24i, but maybe with a bit more resolution in the Leica. the Leica was very bright and crisp, whereas the Vortex was very good, but didn't exactly wow me.

What are your thoughts on these two? They are basically the same price. I have a TT 5-25, Schmidt Bender 5-25 with the DTII+ turrets, and I love them, but I wanted something less expensive for a 22LR build.

Looks like the Leica has quite a bit bigger FOV, being that it's 30x on the top end.

I need to get the Vortex to the range and check it out more thoroughly, but I'm feeling like I made a mistake.

Scott

Sadly my match days are slowing down due to new life commitments as a dad. Don’t need this scope sitting around collecting dust.

I’ll start with the bad, the object cap doesn’t spring open but once it’s flipped all the way open, it will stay open. How I got it from the previous owner. The windage knob has a little brass rash on it as well. Past that, it’s everything you’d expect a Tangent to be. Asking 3650 shipped, or trade for a kahles dlr 5-25 lsw with cash on top.

Mount is not for sale.

Any info on this: https://www.schmidtundbender.de/en/...cw-DT-II-MTC-LT-ST-II-ZC-LT/16A-911-422-M3-I6

Various items getting cleared out over the next few weeks.

Badger Ordnance Conditon One FDE 1.93 34mm - $225

ZCO Block Mount 6Mil w/o diving board - $225
ZCO Block Mount 6Mil w/ diving board - $275

Reptilia AUS 1.54 30 mm with T2 ring cap - $250 sold

Q Cherry Bomb 1/2x28 (2) - $50 each sold
Q SR-25 3 prong 3/4x24 - $60

Area 419 12” Universal Mlok Arca (2) - $65 each sold

HK 416 BCG - $700 sold

I’ll hear out reasonable offers and I’m open to some trades (mostly, but not exclusively ammo). I’ll have more stuff in the coming weeks.

Steve

My favorite LPVO. Took this to a couple courses and used it as my truck gun optic for several years. As such it’s got some exterior salt but the glass and function is 100% 1600$ to your door or 1700 with the mount. I know these are rare but I don’t need to gouge, just need to move it along without dealing with tire kickers and low ballers without the class to negotiate. No trades, Venmo, ppal, Zelle.

Cadex 50bmg with 29” barrel. Has an Accutac HD50 bipod and Spuhr scope mount for 35mm tube. Has fired 15 rounds, shot 1/2moa with Hornady ammo, crazy accurate for a 50. 8k

<added to say that I apologize in advance for this likely coming across as a George Carlin type of 'bit, it wasn't my original intention>

I want to talk about "problems" or at least the concept of "problems".

I've got my own "problems" (and I do), you've got your "problems" (and you do), our neighborhoods/county's/ states/ federal government have "problems" (and they do).

There's all kinds of "problems" out there in the world- in no particular order, there's financial/emotional/governmental/mental/sexual/work/familial/etc type of "problems". We've made great big strides in identifying all the sorts of "problems" we all exist amongst over the years. I really doubt that anything in that particular comment is all that controversial or something worth squabbling about. I'd even 'double down' and say that over the past few decades we've become a nation that's hyper aware of our "problems".

But, and this is a 'Sir Mix-a-Lot' emphasis on butts level, I'd humbly suggest that we've become a nation that has chosen (or was engineered) to accept these "problems". We not only accept them as being "problems" but we have entire groups that use these as their personal identities. And we stand in a circle holding our proverbial dicks in our hands because we're only talking about "problems" and somewhere down the line seemed to gave up on talking about solutions and continue to make our "problems" an identity/ a protected "class" (and honestly there's more 'value' in aligning with that mentality than has ever been in existence before in our country). Everybody is "special" & everyone has "problems" but over the past 20 years we stopped asking "why" and instead categorized everyone into these social buckets and accepted that as our reality.


Stepping off of my soap box- I just want to leave you with this... I'd argue we need to collectively reevaluate our perceptions (and be open to our reality being a social construct designed by 'somebody' else). Why is it contrary to point out problems while using them as an identity? Why are independent thoughts questioning this societal construct silenced and why does the conversation never switch to how the perceived "problems" could ultimately be addressed?

It's fucking wild right? We're all experiencing problems, likely the same type of problems, being 'adminstered' by elected official with far greater "problems" than we have in our inner circles (and I'd also argue that exists by design because it makes "us" feel "better" because while our personal life may be a daily battle , at least our perceived household is still "better off" than our elected officials/ local/state/federal government.

And we beat our chest saying that everything is fucked, meanwhile everything in our lives (family & career) is fucked but "we" seem to feel better because by everything else being fucked it gives us some sort of weird Stockholm Syndrome.

-LD

For sale. Hawk Hill heavy varmint 6mm barrel blank. 28" blank, 1:7.5" twist.
$400 obo shipped in conus. Paypal preferred, gift only.
Thanks for looking, MBanning

Impact 747R take off, 6.5 Creedmoor, 24 in.

This is a take off from a complete rifle I purchased locally. The barrel, action, and stock were immaculate, leading to the conclusion this barrel has seen very few rounds, but I have no way to know. The family member who sold this rifle (the owner died) said the was a Bartlein barrel but no marks to indicate manufacturer.

Only trade would be for an Impact Precision 737R action with .223 bolt face, with extra cash on my end.

Zelle or Venmo preferred payment.

$700 includes shipping. Full insurance extra if you choose to purchase that.

Thanks

Salmon River Solutions full length arca rail.

$85 shipped

6 creed alpha brass srp
2 firings on brass
288 total
$170View attachment IMG_2122.jpeg

**Sold****

FS/FT Vortex fury HD 5000 AB range finder binoculars 10x42.
Everything works as it should. Comes with lens caps, cleaning cloth, directions, original box and I’ll include the vortex post and tri pod mount.
$950 shipped. If you want insurance, that will additional.
I’m interested in trading for scopes or Vectronix 12x42 binos. I’ll add cash where needed.

I got into hand loading loading .45acp, 9x19 and 5.56x45. Just making decent but plinking ammo, long story short I went for mostly LEE products and grabbed one of their Challenger presses which was a new thing at the time I believe that had the locking bushing to quick swap dies so I didn’t have to redo setup every time I changed a die….

Was still annoying and I hate single stage for doing a lot of ammo, BUT that press was good enough to get me going, learn and make some ammo.

Now I have shifted focus less on volume (thank goodness as that was the wrong tool for that job) and more on precision.

I have my doubts with the bushing system of that press…. And so I’m wondering where to start looking to make match quality top shelf ammunition. I have a set of Lyman .308 dies i inherited, I recently bought a .308 bolt action that’s heavily focused on long range accuracy.

Would I be wasting my time with that press? And if so, what’s an upper end of the bell curve value press that’s not going to break my wallet but I can rely on? I don’t have Dillon compound press money….and since this will be low volume, I’m absolutely more focused on accuracy and repeatability, so single stage is what I’m after here.

Hey guys,
milling a slide is just a pita over here, so I´m looking for a good alternative.

Are there bulletproofed solutions to mount a red dot on a Glock without a slide cut?

I want to add a Steiner MPS on a Glock 31.

I´ve found this on youtube, beginning at 2:55 min.:
Login to view embedded media
But no Steiner MPS (Aimpoint Acro footprint) there.

Read a rumor a while back i believe on here about how the mdt XTN folding stock works with the solus chassis.

Anyone tested this? Ill die of old age before Aero comes out with the folding stock. Love the solus pistol chassis with my impact action but dont want to go the folding 1913 route.

Appreciate any help gents.

Hello for sale I have a brand new unfired MK13 Mod 5 that was built exactly to spec, the rifle was built by Red Bull armory. Correct G prefix action, navy seal surplus return stock and NV rail, seal return pelican case with 7 mags, night force nxs 22x mor c reticle with the era correct slow speed turrets. No short cuts were taken in this build this is a turn key rifle you just need to sight it in. Please don’t ask for trades, I’m selling to fund a motor build for my truck. Thanks!

$8000

BLUF: Lots of parts and backstory, $5100 shipped

I’ve had this for about 2 years and I initially got it as a Gen 1 Titan chambered in .40 without an optic cut. I sent it out to DSC gunworks to get the following done:

-Recoat entire gun
-Bronze 9mm barrel
-Cut for Atlas optic plates
-Trigger job
-Cut for flashlight rail (if you have a good eye you’ll notice that the recoil lug slot isn’t as far back as it should be and you’d be right, the manufacturer info is on the bottom and he cut it as far back as possible without disrupting that. You can still run a X300-B if you remove the lug and just clamp it on the sides super tight. Lame, I know imagine my discontent when it was done without knowing that upfront)

Since then it’s got at least 4,000 rounds on it if I had to guess. None of the wear you see is from being negligent, I just used this gun a lot in dry fire and to be a USPSA gamer.


Includes:
-Gun
-Holosun 507Comp
-5x 23rd (as configured) 9mm mags 140mm
-3x 140mm MBX mags for .40cal
-3x various holsters, 2 have QLS forks
-Atlas Iron sight plate
-Dawson Ice magwell with 1 used and 1 brand new insert
-3x different extra triggers, one red dirt, one infinity, one that I cant remember
-KKM .40 cal barrel with appropriate spring
-Atlas recoil spring tuning pack
-Wilson shock buffs
-6x Staccato basepads and springs to return the modded tubes to factory
-4x Grams spring/follower with TTI basepads for Staccato tubes
-Atlas thumb ledge
-Standard slide stop
-MPA shielded safety
-EGW mag release paddle
-Case
-Additional small parts not pictured


Gun and case ships to your FFL, all else will go to you direct. Insurance not included.
View attachment IMG_3782.jpegView attachment IMG_3783.jpeg

WTF???

Linked on Citizen Free Press

Login to view embedded media

Title says it all, looking to buy one for around the 2k range, which a few have sold in for in the last year.

No 1 Redding Competiton Shellholder Kit - $40 tyd


No 6 Redding Competition Shellholder Kit - $old


Hornady Comparator Kit - $40


Defensive Edge 260 Terminator Dies - $100


Mighty Armory 6BR Sizing Die (needs decaping pin) - $50

Curious if anyone makes a retrofit kit to get rid of the stock skins for accuracy international rifles for a modern aluminum sides and aluminum front rail system?

PRSTF MDT SendiT + CrushiT Dual Mount.
SendiT and CrushiT devices not included, mount only.

$old.
Discreet PayPal Friends and Family or Venmo gift.

Looks interesting. For a CMMG conversion kit.