I am looking to order a new stock from McMillan and was set on the A5. I'm currently using an A3-5 but I didn't order it with some options I'd like now so I'm going for a new model. I have a bit of a love hate relationship with the butthook but figured it wasn't a huge deal either way so I settled on the A5. I like the wider forend on the A5. Somehow I missed that McMillan now has the A5-7 which is basically just the A5 without the butthook. Does anyone have a good argument for or against the butthook? I do like it sometimes to help pull the stock into my shoulder but it also interferes with certain rear bags. Anyone have pictures of theirs? I'm also looking at the A6/A6-7. Anyone have experience with those?

Scope sold, rings & level available.

As the title says, I have a lightly used Viper gen II for sale. Overall in great shape, however there is a small mark on the very top/center of the glass, only visible on 3x. Once you begin increasing mag, it’s no longer visible before it’s even at 4x magnification. Might just need cleaned really well, I couldn’t even get the camera to focus and show the mark.

Illumination works, everything seems to function great for the little time I used it. Vortex defender caps included, I’ve never had them off the scope. Vortex Pro rings and level can be included.
No box or docs.
$sold shipped as pictured.
$sold without rings & level.
Only trade would be for a Defiance LA.

Title says it. Wrong size for me.

$75 shipped

Looking for the 16" forend for an accuracy international aics ax chassis. Preferably in peanut butter but not picky.

Used S&B PMII 4-16x42mm, Gen2XR crosshair

Definetly some signs of wear but glass is in great shape.

13MIL turret, illumination works fine

Asking $2275 shipped

I have a slightly used MK 5 I'm looking to move in a Area 419 tactical one piece mount. All info on the mount and scope are in the pictures. Scope will come with original packaging and I will include the hard case the mount came in.

Asking $2300 shipped for the whole setup
Asking $1900 shipped for the MK 5 alone ( no mount )

Not looking for any trades.

AR15 Super safety package drop in ready. Was installed in lower but never fired.

$175 shipped

Build breakdown:
Seekins billet receivers
Seekins lpk
Jp low mass bcg
Bcm charging handle
Triggertech diamond flat shoe
Magpul fixed stock
Seekins handgaurd (this is the style that mounts off the integral upper handgaurd mount. It's not mounted off the barrel nut)
22" 6arc bartlein spiral fluted 7.25 twist +2 rifle length gas setup from craddock precision with matched headspaced bolt head
Superlative arms restrictive/bleed off style adjustable gas block
Area 419 hellfire 6mm
Vortex cantilever mount
5 - 6arc ASC steel mags

This rifle shoots lights out with the 2 loads ive worked up for it. Shoots just over 1moa out to 1000y (confirmed with shotmarker target at 1000) with the 90gr scenar load. Barrel has around 600rd down the barrel. Hate to sell it but could use the funds elsewhere. Price is shipped to your FFL unless you're a missouri local and we meet in person. Will provide load data after purchase for 90gr scenar and 95gr vld
$2200 shipped and insured

NO TRADES.

Going to hit a 22 match for fun this weekend and to stress myself out it's with zero prep. Anyone have a BC for SK Rifle Match or Wolf Match Target? I can confirm velocity when I zero in the morning but before then I'll have zero chance to check anything. I've seen for the most part 0.132 is the best average but saw people using as high as 0.170.

Past velocity:
SK RM: 1003, 74.1es, 18.1sd (20 round string)
Wolf MT: 1083, 28.9es, 8.5sd (20 round string)

My preference is the Wolf MT, been most consistent/accurate but my next best that I have enough of is SK RM.

Looking for a short action savage chassis that will take aics mags

I really like the Dry earth color from eberlestock and looks like they make a scope/muzzle cover. anybody try it ?

http://www.eberlestock.com/Backpack%20Accessories.htm#ARSC-CP

I volunteered to RO the 2025 Nightforce Steel Challenge Match so I don't need the match registration that I paid for. It's yours for what I paid for it, $310

*SOLD*

Stoopid bitch leaves her gun in the restroom of an arena. The chief says that she's a good girl and will be punished. Punishment entails of being promoted to overseeing the training of other officers.

Up for sale is my Spuhr SICS chassis for Rem700SA/clone. Includes adjustable bag rider, 6x external weights, and bubble level. Will ship in factory box. Used in a few matches, has a few scratches. By far my favorite chassis I have owned, moving to an AI AT-X so no need for this anymore.

$1450 Shipped
Paypal F&F, Venmo F&F

Dreamed of chasing elk with muzzle loader but never got around to it and don’t see that as a possibility moving forward.

Shot this a handful of times probably 10-15 years ago then it’s just been collecting dust.

Scope is a Nikon omega 3-9 with BDC reticle.

Will not ship powder and primers. I am located in Houston, Tx and willing to meet within a reasonable driving distance.

Asking $850 for everything.

Hey all I’ve been shooting a Ruger 10/22 LVT for the last few years and shot very well with it winning/ placing in small local shoots but I’m debating upgrading and figure I should move to bolt gun instead of pouring money into the ruger. The few guys I know running kidds can’t run suppressors because of fouling and gumming up so that’s a deal breaker for me. Right now I’m considering the b14r barreled actions steel or ss heavy, T1x (my prs centerfire is a t3x ctr in a whiskey 3), or a cz457 mtr or varmint.

Reviews look like accuracy out of the new b14r heavy are picky and so so and rebarreling is expensive and a pain but uses 700 accessories so opens a lot of options

T1x is a semi light profile for the job and acceptable accuracy but same ecosystem as my centerfire. If the ace was closer to 1200 I’d probably just do that.

Cz457 is the mtr worth it over the varmint? Threaded mtr are like hens teeth so either have it threaded or buy a different barrel.

If my centerfire was a 700 platform the b14r would make a ton of sense but since im running a tikka that makes the 457 and T1x seem like a more worthwhile investment?

Getting out of predator hunting. Headlamp and rifle light. Have 4 batteries, ( 2 batteries are in the 2 lights) have home and car chargers.

Night eyes GL350 and HL08 are the models.

Asking $100 shipped CONUS. Also selling a foxpro shockwave electric call we could work a package deal on.

Open to trade ideas.

Bacically new. Played with it at the house and decided I’m too lazy to actually move it between my different rifles so it has just sat in the drawer.

$150 shipped CONUS.

PM if interested to avoid scammers.

SOLD-Sealed 500ct Berger 109s, $245 shipped to lower 48 SOLD.

Unopened case Alpha Munitions 6GT brass, $120 shipped to lower 48.

PayPal Friends and Family or you pick up fees.

Selling a few of my unneeded SPUHR mount accessories. The Pic Rail was bought new from Optics Planet. The spacers were bought from other Hide members last year. Both spacers are like new and unused in the field. They all didn't work for my rifle setup.

A) SPHUR A-0037 Picatinny Rail: 75mm(L) x 25mm (H) - SOLD
Will ship in OEM packaging

B) SPUHR A-0015 Spacer: 10mm - SOLD
Will not ship on OEM packaging

C) SPUHR A-0001 Spacer: 4mm - SOLD
Will ship in OEM packaging

Accepting Paypal FF and Zelle only. No notes.AVOID SCAMMERS! PM me first. No business in the thread please!

New to the world of NV. I grabbed a pvs-30 recently to start playing at night. I noticed when the moon was straight overhead the targets got almost shadowed in the optic and made it very hard to see good detail shooting. Without grabbing a Wilcox Raptar so I can leave my Vortex Impact, what IR illuminator do you recommend. Some hunting, a lot of LR shooting.

i am a bit confused. does this represent backing off from DHHS transparency goals and backing off of his attacks on vaccine scams? there were legit life saving vaccines before mRNA death shots. MMR,polio and small pox come to mind. that was before mRNA and evidence that pharma was adding things that were not admitted or shown,mostly to fulfill Gates's depop goals. now parents are between a rock and a hard place on protecting their children. am i getting concerned and more paranoid with this and the slow movement on Epstein files and gaming re Ukraine?

Going to be a lot of REEEE!! from this.

Selling a pair of excellent condition Leica Geovid Pro 10x32 binos. These have only been used once on a hunt and stayed in the pickup. The upgrade for full applied ballistics has been bought and does transfer to new owner. Comes with everything in the photos. Asking $2150 tyd

Question for AXMC shooters that have the new factory AI small firing pin bolts or have swapped their LFP bolts to SFP bolts:

I know the firing pin itself is obviously different, but is the firing pin shroud assembly (the part containing the safety lever that locks into the bolt body) the same between the LFP and SFP?

I'm hoping I can keep my existing serialized LFP bolt shroud and just buy a new small firing pin and swap the current large firing pin for small firing pin. It's an easy swap, 2 set screws, reset firing pin protrusion, done. I really don't want to spend $500+ on an complete SFP bolt shroud assembly if I don't have to if I can simply swap a $100ish small firing pin onto my existing bolt shroud.

Reason I'm asking if I'm wondering if AI did something silly like change the size or shape or spacing of the SFP bolt shroud bayonet lugs so you can't stick an SFP bolt shroud assembly into an LFP bolt body or vice versa. I don't have a factory AXMC SFP bolt or SFP bolt shroud assembly on hand to check.