Very nice FDE gov contract Leupold mark 4 3.5-10x40 illuminated scope. Everything works perfect.

Exact scope used on the m110 & mk12’s

Perfect for those GWOT clones

May consider trades


$1650

Paypal friends and family or zelle

This started as an idea and is now a reality! I started a thread on AccurateShooter Forum to gauge interest in gathering a group together to purchase custom cut case foam for the SEB Neo-X. Needless to say, there is massive interest and I put together a list of 30 people interested in getting in on something. I met with the designer today and approved the prototype the order is officially placed.

This post is for custom cut, heavy duty, closed-cell case foam designed to perfectly fit the SEB Neo-X. This stuff is firm, holds upto 50lbs, is self healing and resistant to oil. I had this designed to be a direct replacement to the bottom half of an Apache Model #4800 found at your local Harbor Freight.

This post is for the remaining 30 units that will be available to ship in 3-4 weeks when production is finished.

Price is $130.00 Shipped & Insured

Who wants one? Reply to this thread and send me a PM

(Fyi... Thread is cross posted on AccurateShooter, LongRangeHunting and Rokslide Forums as well.)

Tricer-RP bipod $300 shipped
Includes:
long and short legs
Arca and Picatinny clamps
Sling swivel mount

Details from Tricers website
View attachment IMG_6703.jpeg

Good condition, does show some wear from normal use. These are $270 new

$165 shipped to lower 48

Prices include shipping.

SP-4001 - 0 Left - $295 Each (SOLD)
• Tube Diameter: 34mm
• Height: 30mm (1.18”)
• Length: 151 mm/5.94
• Cant: 0 MIL/0 MOA
• Mounting System: Picatinny




SP-4006 - 1 - $295 Each
• Tube Diameter: 34mm
• Height: 34mm (1.35”)
• Length: 121 mm/4.76
• Cant: 0 MIL/0 MOA
• Mounting System: Picatinny





SP-4616 - 0 - $295 Each (SOLD)
• Tube Diameter: 34mm
• Height: 38mm (1.5”)
• Length: 150 mm/5.91”
• Cant: 6 MIL/20.6 MOA
• Mounting System: Picatinny




QDP-4046 - 0 - $350 Each (SOLD)
• Tube Diameter: 34mm
• Height: 34mm (1.35”)
• Length: 151 mm/5.94
• Cant: 0 MIL/0 MOA
• Mounting System: Cantilever Picatinny Throw Lever




These have been through a gun room move, so some of the product boxes might be a little scratch and dent, as shown in the pictures but not the mounts themselves of course.

Feel free to message me with any questions you may have. PayPal FF, Venmo, CashApp, or Zelle.

Going to update this thread with random odds and ends for sale. Can accept Zelle / Apple Pay / Cashapp. ALL PRICES INCLUDE FREE SHIP.

Knights Armament USMC 600 meter micro rear iron sight s- $85 shipped


Wilcox RulR mounts. These replace the top cap on any 30mm Night Force ultralite ring. They can be used to mount range finders, red dots, etc. Often seen on Devgru guns. Have three variants of them. Big logo / small logo / no logo - You pick - $225 shipped


Knights Armament low pro gas blocks - These are surplus recce gas blocks. They are older stock and have different finishing than the more recent gas blocks that Knights produced until a few years ago. If doing a NSW Recce rifle this is the gas block you want. $175 shipped.

Brand new in box. Decided on something else. Currently has 209 ignition but I have conversions for musket caps or variflame LRP. Will include 1 conversion of your choice. Looking to get $550 TYD or FTF near Boise

Would trade for a Mcmillian Game warden r700 SA m5

I went to adjustable legs and don’t picture needing these. Rubber end caps missing. Minor scratching. I have 2 different lengths. $45TYD per set.

Mounted this on my Henry lever gun and its spend most of its life in the safe. Want to do something different so letting this go. $400tyd will include the Ranger precision Henry mount if you want it.

Posting this cause there isn’t too much info out on the interwebz of the CAT JL on a bolt gun. Needed to start a barrel break in after a local 600 yard competition today, so I shot a quick video my CAT JL Titanium compared to my Magnus. Rounds were FGMM 140 Grain Bergers, 6.5CM, 26” barrel.

We also shot it on a friends rifle, chambered in 6.5PRC; and without ear pro they both sounded very similar in overall sound. It did appear the Magnus peaks quicker compared to the CAT. Recoil impulse was good with both. The JL does save you a little weight and overall length. If anyone wants comparative pictures of the overall size let me know and I can add.

CAT JL

TBAC Magnus

SOLD 5/6

Have a like new Badger C1 black 30mm 1.54" 0 MOA mount for sale. Recently changed from a 30mm 1-6 to a 34mm 1-10 on my 18" AR and have this left over.

Not sure why I even bothered changing optics as I pretty much never shoot that rifle... sometimes the want to try something new overrides common sense, lol

Asking $225 shipped and insured. Payment via Zelle, Paypal F&F, USPS MO, or check (will ship when payment clears.)

this is brand new and I sent out to Singuard solution to hand stipple which cost $120 and the forend was around $30. I have $150 in it…

$85 shipped to lower 48

Brand new ambi lower, it was part of a complete rifle I purchased.

$1100 shipped
Zelle for payment

Price: $1000 $975
Shipping: CONUS
Payment: USPS Money Order is preferred, but I'll do PayPal F&F.
For your safety do NOT reply to this post. Scammers use your "I'll take it." post to try and get you.

Scope only, mount not included.
Glass is a little dusty but will clean it when I go to work before shipping it. I work for one of Trijicons competitors, better equipped to clean glass there than at home. All paperwork included, even the microfiber towel it comes with.

Price: $675 $650
Shipping: CONUS
Payment: USPS Money Order is preferred, but I'll do PayPal F&F.
For your safety do NOT reply to this post. Scammers use your "I'll take it." post to try and get you.

Setup includes.
MDT LSS Gen2
MDT SCS Lite Stock with four spacers. (I'll update when I find a fourth spacer. I have a ton of them.)
MDT 7" Arca Rail (Needed slight modification to fit. The screw is going through the factory sling stud hole. Rail needed a M-LOK stud removed.)
MKM Adaptive Precision Grip (Also comes with MDT Vertical Grip Premier.)

Everything is in great condition. Some slight wear around the QD sling mount on the buttstock. Then slight surface rust on some of the screws, but that is to be expected with what they use. I did source some stainless brass tipped set screws for the cheek rest.
Was a great little chassis for my 12.5" 6.5CM.

I originally bought a 3-15 Viper Gen 2 for this 6.5CM Varmint. After sending 2 back and getting a 3rd that the Brass windage post mauled by heavy handed assemblers I asked to swap it out for this 5-25 Viper HD to get a different windage zero reset system. Vortex was very accommodating.

I'm not very scope savy so my opinion may mean nothing. First I wasn't impressed with the glass on any of the three 3-15x PSTs. I'd quickly get eye fatigue with them. I have two 6-24 and one 4-16 HSTs and their glass is easier on my eyes than the PSTs. That's just me. The image quality degraded at on both the 6-24 HSTs and the PSTs towards maximum magnification. The HSTs never come off of 18x where the reticle is trued. 18x is enough for my shooting. The degraded image on the PST at 15 was kind of a bummer. Especially at 500yards.

I only just bore sighted HD today so I can only give my first impressions. The glass is clearer and easier on my eyes at 500 yard plate than any of the other scopes mentioned. I'm impressed because that's on 25X. I can clearly see small paint chip details on the 500 plate. The Elevation turret clicks very nicely. I haven't used the windage turret yet because it bore sighted very close. I'm not excited that the windage turret is capped but the step up in image makes up for it.

The scope is surprisingly light for a scope this size. I'm not sure if that's good or bad yet.
II'll add to this as needed.

I just figured I'd throw this out there for anyone shopping scopes.

I have been looking for Looking for Badger Ordnance rail 306-06 and 34mm medium rings for about 1 month now, please help me find it!

Thank you so much for your guys help!!!

Its a little tight, I can get card stock between the barrel and the top of the bridge but I dont know if its enough. I'm thinking of getting some gasket material from Napa in the morning to make shims. Eventually the rifle will be rebarreled when I kill the current barrel. Gasket material shims be good enough to get me some clearance and keep the bridge steady enough when I use a friends gear?

Leupold MK6 1-6 LPVO in excellent shape. Painted and wrapped as shown in pics. Glass is perfect. Includes flip caps, does not include mount or RMR.

$1580 shipped
**SOLD to zekers7**

Bought new 3 months ago. Awesome LPVO. Mil reticle. $500 shipped in box. Mount and red dot not included.

MDT oryx (grey) rem 700 long action with the oryx Arca rail . 450$

Gray ops Garmin mount $50

in as new condition. Garmin mount was used to mount C1 on my diving board. Worked perfectly.

PP F&F

Burris dropping a new optic, XTR PS. Pretty much an XTR3/PRO with the capabilities of the Veractiy PH. Detent-less elevation turret that has a HUD inside that shows elevation, windage, temp, has a level and a timer.

It could either be really good, or really bad.

Burris XTR PS Video

Burris XTR PS Official Page

Currently making some Remington RACS M40A6 with 2 piece top rail. Hope you guys like it.

WTS: Elite iron bipod Sako / KRG spigot mount

$100.00

PayPal FF or Zelle

This screws on to the base bipod to enable you to use the spigot mount from a Sako TRG 22/42 or KRG clone.



It’s got basically no wear on it whatsoever, except for where the spigot plug plugs into the rifle.

The flash sort of highlights areas on the finish, but there’s really no visible metal anywhere except on the tongue.