Has 40 rounds through it. Originally was going to SBR it and just never got around. Have to move some stuff for something else. Octagon barrel. $950 shipped

Prestacycle T-Handle (non ratcheting) wallet w/Fix it sticks T-Handle

New condition

Sold shipped

Triad Tactical Comb Strips

5 packs of 6 pieces each + extras

Works great for building up cheek height when using stock packs

$20 for all shipped

Selling my MDT GRND-POD bipod mlok. Used but in great shape.

Asking $100

PM if interested

​

Have a like-new Leica Geovid Pro AB+ https://leica-camera.com/en-US/product/leica-geovid-pro-10x42-ab

I don't need all the AB+ stuff, so I'm looking at trading for a Swarovski EL Range 12x42, or selling for $2500 shipped.

- SOLD - AI AX chassis for Rem 700 SA and clones. Like new condition, only 20rds have been through it. 15” handguard. Comes with the full length area 419 arca rail and anarchy outdoors thumb rest.

- SOLD - Ace stainless 6.5mm 5/8x24

- SOLD - Gen 3 APA fat bastard .22cal 5/8x24


- Brownells 18” 6.5 Grendel AR15 barrel, 1/8 twist, 5R rifling, mid length gas, threaded 5/8x24. Has a few hundred rounds through it. $100 shipped

- 300 BLK complete SBR upper. Aero M4E1 receiver, 10” BA barrel, 9” American Defense (ADM) rail, SOLGW gas block, standard BCG / CH. Excellent condition, only 40 rds through it. $400 shipped


Prices are shipped to the lower 48. PayPal FF, Venmo or Zelle for payment.

Looking to try out a Scalarworks mount with some of my SB scopes. Looking for the offset/cantilever type that will move my scope forward some with the short pic rail on my receivers. Prefer 0 MOA, but will consider others.

These don't come up for sale often and here is your chance to own a oil-filled quartz and all the charm that comes with a watch with these tidy dimensions (41mm case, 20mm lugs, 47.5mm lug to lug and just 11.8mm thick) and still being rated to 5000 meters of water resistance. This watch is so ridiculously legible from every angle, as the oil makes the hands appear to float against the crystal, and you can see it from the sharpest of angles, even in the water. There is also the fact that the case is made from hardened German submarine steel...it doesn't get more impervious to sea water than that...

I just bought this watch brand new in May of 2024, so still a long time left on the factory warranty. Watch is nearly perfect as you can see. The case shows no signs of wear whatsoever from any angle (which is typical for the Tegimented versions of the U-series watches) Only light swirling is on the caseback itself, which I don't believe is tegimented on these watches. The factory strap has never been worn either. I will also include the blood red rubber strap...because I just think it looks fantastic on this watch.

I paid $3167.20 to the door including tax/shipping on this watch when new, and it is still near LNIB.
Looking for $2650 shipped anywhere in CONUS.

Redding 6mm Creedmoore competition die set. Redding 58443. In great condition.
$250 includes shipping. PayPal f&f.

Esee Izula w/black oxide finish

Like new condition

Sold shipped

Does anyone have experience with the German Precision Optics GPOTAC 45? It reminds me of the Hensoldt Spotter 45. Its a good price point and has a reticle as well.

Selling my large frame Armaspec victory charging handle. Used but in good shape and will be cleaned when shipped.

Asking $35

PM if interested

Selling 2 large magpul mags, both are 20rd mags. One is slightly used but cleaned, other brand new in its package.

Asking $25 for both

PM if interested

ADVANCED PRECISION RIFLE COURSE
Hat Creek Training | Riggins, Idaho
Bryan Morgan | Lead Instructor
May 16-20, 2020

Over the last several years, we've had a tremendous amount requests for an open enrollment course. Our training schedule made it difficult, and we appreciate the patience everyone has given us. We're now offering a 4-day, open enrollment, Advanced Precision Rifle Course. We will cover a variety of topics from high-angle shooting to canyon wind reading and ELR. You'll get to work with our Hat Creek instructor team, 10-12 hours a day, in a physically demanding environment, and at one of the most purpose built training facilities in the world. We're only going to offer 1, possibly 2 courses a year for open enrollment, and we're looking forward to seeing some of you soon.


For more info and/or to register contact Misty at [email protected].

Hand loads 22 ARC



62 Eld VT, has anyone had issues getting this bullet to produce good groups?

AR platform 16”

Faxon 6.5 Grendel BCG

Quality barrel

The rifle in question will shoot the following sub Moa.

• 53 Gr Vmax 2900-3400 fps all good
• 73 Gr Berger BT Target 2750-2900 fps
• 75 Gr Eld M. 2800-2900 fps

The rifle will not shoot the 62 Gr Eld VT

I have attempted 3 primer types. Cases are a mix of Hornady 22 arc. Hornady 6.5 grendel converted.



Powders used in various charge weights

• CFE223 - worst groups
• Varget
• N135
• H135

Going through the gun room, I've got lots of extra stuff to get rid of...

Triggers:

1) Geissele SSA (Super Semi-Automatic) Trigger, SOLD

Comes with a Larue Trigger Action Chassis (mock trigger housing) a magpul grip and standard safety

(https://geissele.com/super-semi-automatic-ssar-trigger.html)

2) Geissele Super V Trigger, $135 (Basically the predecessor to the Super 3 Gun Trigger), SOLD

Comes with a Larue Trigger Action Chassis (mock trigger housing) and a generic grip

3) LMT (or LMT clone - not sure), 2 stage curved, (See pictures), $85.00

(Looks exactly like this: https://www.primaryarms.com/lmt-axle-s-a-euro-two-stage-ar-trigger-group)

Larue Trigger Action Chassis (mock trigger housing), and a Timney Ambi safety.

Triggers 1 & 2 are SOLD.

3 Unknown trigger (LMT (or LMT clone - not sure)), 2 stage, curved, probably 2lbs and 4.5lbs

Chambered for the .327 Federal magnum which was meant to push some .357 mag level numbers but adding a 6th round in a j-frame.
Also shoots 32 H&R magnum as well as 32 S&W long and short ammo.
3" + the "power port" comp to help with the full-blooded .327 loads. Discontinued and rare.

This particular specimen has had some work done by Dave Lauck of D&L Sport

barrel trued to frame
black nitride refinish
Orange tritium HD front and square notch rear sights (installed 2024)
Carry trigger job with full-power spring


Comes with Lok grip G10 grips. and Dark Star Gear holster.
160 rounds of Fed .327 mag HydraShok
20 rounds of Fed 32H&R mag hollow point


Asking $1990 shipped for the pistol, ammo, holster as shown
Pistol must go to FFL via UPS air
Discreet paypal, Zelle, or cashier's check (no interest in trades at this time)

I have a few mostly new MPX parts here since I sent mine to be SD converted.

Lancer 14” carbon handguard like new - $225

OEM 16” handguard - $180

Not pictured - 16” factory barrel with TTI brake, shoots very well. Just the barrel no gas block assembly -$300

the short barrel and 8" midwest handguard are gone

Aftermarket M-LOK siderails for Gen 1 and 2 JAEs. These allow for the use of M-LOK attachments as opposed to the original rails that only allow use of the proprietary attachments.

$sold shipped.

I have a set of chargemasters I'd like to move on. $350 shipped for the pair. Has the insert on the powder dispenser nozzle.

Brand new. I bid on 2 on eBay and end up winning both and I don’t need 2.

$600 shipped to your door in the USA.

Pm call or text me. 815-878-8255

PP F&F. Will UPS it out the same business day.

Got an older T3 lite 6.5x55 I gifted to my Dad 15+ years ago. Dad has bought a bunch of rifles since, he used it for 5 years or so, probably has 1000 rounds through it. He bought all the grandkids t3x 6.5 Creeds, but decided to give this one to one of my kids.
Problem is my son relates sound to recoil. He'll shoot my suppressed 6.5 Creed all day, but his brothers unsuppressed 6.5 he says kicks horribly.

Was going to have it threaded 5/8-24 for a can. Started thinking about it, wondering if anyone here has had any experience. Worried the hammer forged barrel might go to hell accuracy wise.

So would you roll the dice and thread it? Or should I just suck it up and pay the $800 for a re-barrel. I think there was a guy in Bozeman area doing pre-fits but I can't remember who it was.

I joined a few months ago. Lifelong Hunter and gun enthusiast. I am new to the suppressor and Thermal / night vision game and am hooked on both now. Mainly here to read, learn and research. I love the site. RTR

Payment via discreet Paypal FnF or Venmo. Shipped via USPS priority.

Surefire MB68AR Muzzle Brake. Overall in decent shape but does have some dings from use. Threaded in 5/8x24. $200 shipped.