I've started to shoot some NRL22 with my Bergara B-14r. I have it in a KRG Bravo chassis. I'm currently running an 8" Area419 ARCALOK rail with a bipod mounted to the Front Stud. I'm looking to go to the 12" ARCALOK Rail ( https://www.area419.com/product/alk-mlok12/ ). Does anyone have this combination to confirm it works before I make the purchase?

My concern is the M-Lok on the bottom not working with the Bravo and/or the extension past the forearm not being strong enough since this version is more skeletonized.

Thanks for your time.

Like new Hawkins 34mm 1.25” Lightweight Tactical Rings with center bubble level. Mounted one time and ended up swapping tube sizes and don’t need these anymore. They look like they’ve never been used. $130 shipped to your front door.

SOLD

For sale is a lightly used Nighthawk Custom 9mm Vice President. 4.25" bushing barrel, IOS optic system, two NH mags.

I had the factory install ambi safeties and a .19 gold bead front sight, but the original parts are included. Also included is an SRO IOS plate.

The gun is great, but I'm realizing I'm not into metal grips, and this gun is too nice to be a safe queen.

Asking $4000 shipped. (Insurance extra) Open to reasonable cash offers, but no trades please.

For sale only where unambiguously legal. I can take cashier's check, regular check (clears before shipping), or money order. Unfortunately I can't do electronic payments for this.

Cross-posted.

This was used on a kahles 6mm for about 20 rounds. It was too high for me. It’s the 1.34” tall mount for 36mm main tube 0 cant
Also comes with standard tactical diving board.
New from area 419 was $460
Will sell for $400 shipped and insured
Zelle cash app usps mo or cert check
I do have the little pelican case the mount came in that it will ship in

Sold thank you!!$1100.00 obo Shipped to your FFL.
Used with @2500 rounds cycled through it.

M7 Mausingfield action, short action right handed
.473 Bolt face, 308
20 MOA rail
Included Extra firing pin and retention pin
Included Action wrench

I have for sale or trade a brand new Browning BAR Mark 3 in 300wm. I picked this up at a charity event and don’t plan on using it. I would trade for a lot of different rifles of similar value. 22CM or similar. Then anything bigger than the 300wm.

$1,200 shipped to your FFL.

I bought this Remington 581 a little over 2 years ago. At the time, the trigger was frozen. It was also missing the magazine and rear sight. Annnnd....the buttplate was missing a chunk.

Loooooong soaks in acetone, followed by liberal spraying with WD40, followed by applications of RemOil freed the trigger. An aftermarket mag was found, as was a reproduction buttplate. I just installed a Bushnell Rimfire 3-9x scope, instead of an ungainly 4-12x I originally had for it.

Need a trimmer for about 4000 pieces of 5.56 brass. Also have the oddball lots of a 100 cases for various calibers - .243, 6.5 CM, 300 win, etc.

I definitely want something that trims, chamfers and deburrs all in one operation for the 4000 pieces of 5.56, as it will save me a lot of time. The two options I've come across are the Trim-It II and the Giraurd Triway. The Trim-It can be modified to trim multiple calibers and the Triway is specific to one caliber.

Curious how hard it is to setup the Trim-It. Is is worth fussing with for 100 pieces of brass once every 5 years? I'll probably mess up 5 cases before I get things set right.

It might be worth it to buy a dedicated trimmer for the 5.56 and then just get something else to trim the random calibers and chamfer and deburr them by hand.

Thoughts?

Thanks!

Hi,

It has been a long time since posting here. Retirement has given me more time to enjoy my hobbies, and hopefully shoot more. It's nice to be back and continue to learn. Thanks.

I have 3D-printed magazine accessories available for the curved 10-shot magazines (factory part number 1420-U13) for Anschutz rifles. This includes models 54, 64, 1710, 1712, 1416, 1417. These are things that I made for myself and use them with my Anschutz 1710 competition rifle, but then other Anschutz shooters at local matches wanted some too, and I'm also now making them available here. I already have a listing here of items for the Vudoo V22.

Most items are made to order, so you can pick your colors and/or options. If you're like me and color doesn't really matter (or you don't specify as a comment with your order), I'll just pick it out for you based on what I have already made or the filament I've got loaded in the 3D printer. On the shelf I usually have them pre-made in red or yellow (easy to find in your range bag), but they can also be made in white, black, gray, or blue. Check with me on other colors if you need something else, like to coordinate with your custom stock.

I combine shipping... add $4 shipping on your first item and then there is no additional shipping cost for more items.

If you see "ANSCHUTZ" or "ANSCHÜTZ"on an item, it is merely to identify what gun it goes with... this is not in any way trying to infringe on Anschütz's excellent rifles and their trademarks.

NOTE THAT THE PHOTOS MAY SHOW A COMBINATION OF ITEMS AND HOW THEY'RE USED TOGETHER. EACH SELECTION IS FOR A SINGLE TYPE ITEM ONLY.

1. A thumb-assist magazine loader for Anschutz 1420-series repeater magazines (used in models 54, 64, 1710, 1712, 1416, and 1417). I found that it was difficult to load the last several rounds into my 10-round magazines as they started to get fuller. This thumb-assist loader makes it A LOT easier! I specifically designed it to work well with the curvature of these magazines. Also, if you have trouble pushing the previous round "just right" to avoid rim-lock, then this tool helps with that too, giving you just the right depth before you push in the next cartridge. $15. Only ONE is included, though some of the photos show multiple ones together.

1A. A thumb-assist magazine loader that's just slightly different than #1 so that it works for the same Anschutz magazines *AND* Savage MKII magazines that have been modified to fit the Anschutz 54/64 guns. It fits perfectly on the modified Savage mags, but has a little slop when used on factory Anschutz mags... but you can use it on both if you prefer to purchase only one loader. $15.

2. Magazine Caps -- if you like to pre-load your 1420-series magazines before going to the range (like I do, especially on competition days), these slip-on/snap-in caps protect that exposed top cartridge from bullet damage. $7 for five, $12 for ten. This item is only the red cap (in your selected quantity and color) shown in the photo, not the magazines nor loaders also shown in some photos.

3. Biathlon style magazine base -- For you 5-round mag folks that want a better grip -- especially if you have a narrow magwell gun like the 54.18 MSR -- I made these biathlon-ish replacement bases in Nordic style. They slide-fit just like the factory mag bases, and have the same spring-nub notch. These take about an hour each to produce, so I'm not stocking them but will make them on request, in red, orange, black or gray. $12 each, or $10 each for 3 or more. This item is only the base piece... you'll need to use your own magazine and spring.

Years ago, from SIG, I purchased a slide with a Romeo 1 red dot on it for my non-optics P229 Legion (9mm). I've since decided I wanted a Legion frame/lower to put that nearly new original slide to good use. Should be no problem, right? Wrong. I can't find a frame-only, Legion or otherwise, anywhere. An inquiry to SIG told me to go to GunBroker (none there), or to a local dealer (none of whom have nor can get one).

Looking for advice from the "collective" here on where I can locate a P229 Legion (or non-Legion) frame/lower to give my lonely slide a fulfilling purpose in life.

Anybody got any ideas? What am I missing here? I'd hate to think this Legion slide is now just a door-stop.

SOLD

ARC Mbrace mount 35mm tube 20MOA cant, 32mm high. $225 shipped

Does anyone get this rough, rust-like finish and color inside their brass neck after firing/cleaning/resizing? I loaded up some 6.5cm rounds after one firing. Dry media cleaned. Resized with sac die (.003" neck tension). and they were extremely heavy seating force and inconsistent seating depths with my l.e. wilson so i looked inside the necks and saw this. Any way to avoid this? I ended up having to use some dry neck lube (graphite) to help with lowering the seating force to feel normal and get my seating depth consistent. Didn't have any issues with the new brass (alpha munitions ocd LRP). This was after one firing. Any one deal with this or have a solution to prevent this?
Thanks,

I would like to sell a Sphur SP-4001 (34mm tube / 1.18” height / 0MOA cant / PIC rail compatible)

This mount was replaced by the 4001c

PayPal $300.00

Thanks

View attachment 8602201View attachment 8602202View attachment 8602203View attachment 8602204

Has anyone ever tried rebarrelling a Barrett M95? For example if I wanted to spin up a 30in Bartlein for one is there anyone who can do that kind of work?

Has anyone heard of or done business with this company?

Bought an SR25 upper with urx4 rail but didn’t come with the wrench and they’re out of stock everywhere. I’m open to buying a used one as well. Please let me know what you have.

Manners TCS
High gloss blue only custom color
Full weight kit and sikes clutch

Looking to trade for:
Long action LRH-plus cash on your end
Short action LRH l-plus cash on your end
MDT HNT26 short action with full arca

Stock is in mint condition.

Will sell for 1550 buyer pays the shipping.

For sale Seekins Havak Hit in .308 with
one magazine
Dead Air Muzzle Brake
419 arca rail.

The scope is an Eotech Vudu 5-25 H59 Reticle on Seekins rings with Vortex Scope Caps. Both are in just like new condition. The rifle has less than 100 rounds through it. Very accurate rifle, but haven’t had time to shoot. The bipod is not part of this sale. The scope comes with the original packaging and the rifle comes with the case that it came from the dealer with.

***Arca Rail on rifle is not included***

Vudu w/ Rings - moved.
Rifle w/ extras - $sold
Package - $sold

PM for payment details.

Looking for a 24-26in heavy contour 6 arc barrel for an origin action. Let me know what ya got.

For sale is an Eberlestock Lodrag back pack. Ive used it at 5 matches. Dry earth color. $220. Free shipping. Located in East Idaho.

Venmo.

I am looking to see if there is any rounds out there for a 300 grain bullet shot out of 44 spcl or magnum brass. I am trying to get into the 700-800fps range.

Essentially I have a 25 yard shot at a feeder for deer. I am trying to keep this as quite as possiable. Anyone out there accomplished this. Will be shooting it out of new 77/44

6.5 Creedmoor Hornady LRP Brass, 466 ct total: 242ct 3x fired, cleaned, annealed and sized. 244ct 4x fired, deprimed. Annealed after every firing. $100 total CONUS

For those looking, I got two of these in today-