Am I correct in thinking that SnB is all back in Germany now with no repairs/warranty work being done here in the states.

Thanks!

Looking to sell my Vortex Viper HD 5-25x50 with vmr-4 mrad reticle, it is brand new in box, never used. Looking for $650 shipped payment via paypal f&f
Sold!!!

Steiner T5XI 5-25x56 Riflescope illuminated SCR Reticle (mils). Also includes steiner t-series rings as well (with level bubble). Please see photos, it's in used good condition with a few scuffs but nothing outside of normal wear. Functions fine without issues. Only looking to upgrade to a higher power optic. Let me know if you have any questions. Includes everthing pictured Scope, rings, sunshade and caps. $1200 shipped. Paypal preferred, to protect buyer & seller.

I didn’t see a thread that seemed to capture all the data in one place. A buddy gives me all his once fired. My dies should be here tomorrow. I’m hoping to match or get close to my 223 bolt gun loads in a gasser.

What loads are working for you guys? Velocities? Barrel length? Gas or Bolt gun?

Thanks in advance.

Unused, no box. 6" blade, S35vn steel.

$500 $475 ftf, $525 $500 shipped CONUS.

ETA: I could use a decent spotting scope in trade.

I'd really like to keep this local due to weight, size, # of boxes, hazmat...

I've come to the conclusion that I'm just not into reloading, after collecting a bunch of stuff! Things listed as used have been used for about 400 rounds of 223, with the exception of the case gage, maybe a dozen or so. Priced to sell as a lot, a couple thousand below sale prices: $5500 $5000 OBRO ftf.

I'd consider a partial trade for a ZCO 527, maybe other high end scopes, or a decent spotting scope.



Mixed brass is mostly 223, 6.5C, and 308. Some is separated, some not.

Condition Tools Qty

Used L-N-L AP 1
New 45-70 dies 1
Used 223 dies 1
New 308 dies 1
New 30-30 dies 1
New 6.5C dies 1
Used 223 plate 1
New 308 plate 1
New 45-70 plate 1
New 30-30 plate 1
New 6.5C plate 1
New Cam-lock Case trimmer 1
New Power Case Prep Center 1
New Hornady A-Tip seating stem, .264 1
New Hornady Cam Lock bullet puller w/ collet 1
New Primer slides 3
New Primer slide springs 2
New Primer pickup tubes 2
New Primer seating plugs 2
Used Case Length gage, 223 1
New Case Length gage, 308, 1 Wilson & 1 Hornady 2
New Case Length gage, 6.5C, 1 Wilson & 1 Hornady 2
New Case Length gage, 45-70 1
New Case Length gage, 30-30 1
Misc.
Used Lyman digital scale 1
Used Cabela's dial caliper 1
Used Cabela's vibratory cleaner 1
Used Media separator 1
Brass polish/cleaner




Brass

New Starline 30-30 100
Used .223, sized/deprimed 2000
Lake City .308 primed 1000
Used Mixed brass a bunch




Powders

Accurate 2520 8 lbs.
Accurate 2200 4 lbs
Ramshot Tac 10 lbs.
Ramshot X-Terminator 11 lbs.
IMR 3031 1 lb.
Hodgdon Pyrodex RS (ffg) 2 lbs.
Winchester 748 1 lb.

Primers

Fiocchi L.R. 3000
CCI #34 L.R. 1000
Wolf S.R. 5000
Winchester S.R. 600



Bullets

Hornady Sub-X 45-70 150
Hornady Sub-X 30-30 100
Hornady Interlock 30-30 100
.224 FMJ 55 gr. About 3700
.308 SMK 168 gr. 550
.308 SMK 175 gr. 200
Hornady AMAX 168 gr. 500
Nosler Cust. Comp. 69 gr. 224 1000
.224 SMK 69 gr. 100
Hornady .224 ELD-M 88 gr. 100
Hornady .224 Match 68 gr. 100

45ACP, Like new condition, not sure if it's even been fired outside of the factory.

Trijicon RMR, 6 factory mags, spare grips, original trigger, factory case, and all the goodies.

$3600 $3500 $3400 ftf in central MI or plus shipping & insurance via ship my gun.

ETA: I could make use of a decent spotter as partial trade. Maybe a ZCO 527 or a 7-35 ATACR, 10x NL Pures. March FX 5-42x56 G2, prefer FML-3 or FML-WBR reticle..

Just starting to look around for a 300 Norma barreled action. I have a couple great smiths that spin up my 6's and such for PRS. My question is, are there folks that specialize or would recommend more for the larger stuff? Such as 300NM or 375CT? tia

Tikka T3 Information

This is a like new C570 ATACR 7-35 MIL-R F1. It has the box, sunshade and all the box bling. Asking $2500 (edited and changed here) shipped insured to your door.

Send it with Brandt built $175

For your consideration, catch and release- M16A4 clone - semi auto
Add a rear sight and ACOG to complete - for easy hits to 600 meters and beyond
Pleasure to shoot - round count is 75 rounds, all match 69 grain. Hitting 12” steel at 600 was cake

Anderson lower:
- mil spec trigger
- A2 grip
- A2 buffer and stock with trap door storage and mil cleaning kit

PSA factory upper:
- correct handguard
- PSA 1:7 20” 5.56 barrel with A2 flash hider

BCG included
Butt stock mag holder vertical grip are included
Sling not included

$1050 entire rifle
$700 URG only
Prices are shipped, insured

Venmo, Zelle, money order
No trades funding another project

Thanks for looking

Thunder Beast TBAC Bipod Kit #1 (including rubber feet) BIPOD-K1​

NIB $445 Zelle

No Trades

This June we are taking a family roadtrip from Georgia to Wyoming. We are stopping along the way of course to stay in different states and enjoy different places.

I have in my mind what to take for emergencies etc. My wife also has a packing list started so the family can add ideas.

What would you pack? If you have done such a trip before please share your wisdom.

Also, while in Yellowstone my daughter wants to do some hiking. Any awareness tips for general safety? Also, hiking shoe recommendations? Or will basic athletic shoes do the trick?

This trip is for my daughter's high school graduation and I want my family to have a wonderful time, but my job is safety first.
Thanks

Hey all, I’d like to pass along my Daniel defense DD5V3 16in 308 Ar 10.

I bought this gun brand new from EuroOptic a year ago, it has a SureFire SOCOM muzzle break on it and a trigger tech diamond AR trigger. (Approximately 150 rounds on gun)

Must ship to FFL possibly open to trades.

Asking $2200 for Daniel defense

I also have a Christensen arms ridge line in 6.5 creed with a Luepold VX-5 3x18 (approximately 200 rounds on gun) I’d like to sell

Asking $2200

Can get more pics of you’d like.

Also can FT or call, Pay pal F&F only pls.

I'm just getting into rimfire shooting. I'm looking for some feedback on Vudoo Barreled actions. I see that eurooptics have barreled actions in stock. Are these any good, or should one be ordered through Vudoo and what are the differences? Also I see
MPA is selling chassies with the Vudoo actions. Thoughts on that?

Basically new Nocpix / Iray Lumi L35 thermal monocular / Scanner. Excellent little unit about the size of a range finder. Never taken to the field only used around the house a few times. Comes with everything a new one would… 2 batteries, charger, carrying case, box, manual, warranty info ect. $1200.00 shipped


PayPal Venmo USPS MO

I have a very lightly used Aeroprecision Solus 17" chassis in FDE with aftermarket mirage shield, wings, thumb rest, grip and bag rider. Also includes the factory thumb rest, grip and bag rider...asking $525.00 shipped for everything with payment via PayPal FF. Please PM with any questions.

Just as the title states, brand new in the box Two Vets 44mm Dual Tension Arca lock head. From TV it retails for 170, I’ll ship it to you for 120.

Payment through Zelle.

(Photo is stock photo from TV.)

If anyone would know, it would be you guys.

I'll be honest, I've been doing the green Loctite in the past and even lapped all of my uppers I built. Have I been doing it wrong?

Login to view embedded media

1650 4.5-18x56 MRAD EBR-7C in Spuhr-4602
1550 4.5-18x56 MRAD Not sure about the brand

Brand new in box Bushnell Match Pro scope 5-30x56 sold shipped

Selling a brand new in the pelican case Barrett M107 50 cal 29”. This is the pre A1 with the shark style brake and my understanding is that there’s not very many of them out there.

Comes with 2 mags, Barrett rings and all the original paperwork and whatnot.

$9000 FIRM. NO TRADES.

FTF with a FL resident in the Tampa area. I will not ship this.