PM whatcha got. Preferably a 60 “L”.

Surefire Wrist Light 2211

300 lumens of hands free light

Li-Ion battery

3 brightness levels

300, 60, 15 lumens

300- 1 hour
60- 4 hours
15- 13 hours

Used little, good condition

$140 shipped

I recently bought a Seekins SP10 in 6mm Creedmoor that I plan to use in PRS gas gun and other competitions. Naturally I'd like to use as aerodynamic of bullet as possible and I have an assortment to try and see what the gun likes. The good news is that so far it shoots everything pretty well. The bad is that it won't feed Berger 109s. The ogive is long enough that the meplat hits below the bottom of the chamber before the feed ramps kick the bullet up enough for it to run into the chamber like it normally would. The gun feeds 108 ELDMs with no issue but the ogive profile on those is quite different from the 109s. I presume I will have the same feeding issue with 110 SMKs and most of the 115 class bullets as well.

I have been using PMAGs. Would a different mag make a difference or is this a case of AR10s aren't designed to shoot super sleek 6mm bullets? Is there anything else that I can try within reason? The gun shoots the 108s just fine and they will work for what I need so I'm not up a creek but I would like to at least have the option to use some of these other bullets.

Pure SKLTN stainless model 20MOA pinned rail. 24” proof carbon barrel in 6.5 Creedmoor muzzle threaded 5/8x24 barrel has 300 rounds on it. Shoots in the .3-.4 with 147 eldm sometimes smaller.
Looking for $2200 obo shipped to your ffl.

Trigger not included

Stock is new, unused, has not been installed.

$200 now $190 shipped.

Hi all, I’m selling a savage B22 model 70248 that is new in the box.

$500 plus shipping to your FFL.

Folks,

I have BNIB
1 ZC 527 5-27×56 (MPCT-3X) 10 Mil NLE
1 56mm sunshade

SKU 400-0474

Price incl shipping and insurance … PayPal/venmo/check

Asking

$3900 scope + sunshade

I have never touched or handled the scope and has been in the box since purchased.

I am not interested in any trades at the moment.




Thanks for looking
Landon

How fast time flies !

Doesn’t seem possible that 50 yrs ago today the Vietnam War was finally over. There are a few of us on this forum that were old enough to have been directly or indirectly involved. I’m thankful that my time over there was relatively safe compared to the forces on the ground 24/7.
I had an aircraft carrier to protect me , no bugs , no leeches , no VC shooting at me.
I lost a few friends over there , some friends that are still there mentally. I made some life long friends I still see and keep up with today.
For all of you who were there , glad you made it home too.

MDT XRS with upgraded enclosed ARCA forend and internal full length forend weight.
Rem 700 SA footprint.
Well cared for, used on my RimX 22lr.

I've got about $900 in this.
I'll take $600 shipped for it all.

Or I can sell you the original configuration without the extras for $450 Shipped & Insured
tyd.

Catch and release.
Picked this up three days ago and put two mags through it. In the meantime, I got called up for a backorder on another rifle I’ve been waiting on.

Price: $2,500 shipped

Note: Ships with factory furniture and a standard 20-round PMAG. Muzzle brake, B5 furniture, and optic setup not included.

Is there a way to ID a M24 trigger? I have an old Remington 700 and wondering if it’s possible it came with a m24

Used in great condition Leupold Mark 5HD 5-25x56 PR2 Mil. Catch and release that I didn’t mount or use. I found a 7-35x that I would rather keep so I’m selling this. Has a competition elevation speed dial. No sunshade. $1400 Shipped

Leupold Mark5HD

• 5-25x56mm
• 35mm Tube
• PR2-Mil reticle
• Leupold Competition Dial and Factory Dial included
• Lens Caps
• Leupold Mark4 “High” Rings
• Vortex Bubble Level
• Sunshade

Excellent condition, only used at a few matches. Comes with box and manual

$1550 shipped

Seeing some chatter that Vudoo closed up shop

I have a 721 30-06 which I got from my father. Nothing fancy but it has a well adjusted trigger. I was hoping for the rifle to serve both as a range toy for local level 300 yd steel and egg matches, as well as a hunting rifle for whitetail in northern new england. The range use being the focus, and hunting as time allows at a friends property.

I recently spent some time at the range with it and it consistently has a POI shift as it warms up. Walks down the paper ~3" at 100 yards till hot, then holds steady. I knew it had a historic tendency for shifting POI so before I took it out I gave it pillars and bedded the action in addition to floating the barrel. I'm pretty sure the pencil barrel is the culprit and am considering re-barreling with something a bit heavier (M24/MTU) but am now thinking about caliber choice.

the basic perimeters are :
readily available match grade factory ammo because I have no time for reloading with a young family
cant be too small of a case cause it a long action and I would like to be able to use the blind mag

currently I'm thinking about 6.5x55 but am wondering what the recommendations might be.

I recognize that the recommendation will likely be origin action with 6BR prefit for the target work and leave the existing rifle alone for hunting but I like projects and making use of what I have.

Prime 6.5 Creedmoor LRP once fired brass.
I have 435 rounds .35 each.

I have a Tikka Tact A1 6.5 Creedmoor. I have been unable to find a replacement bolt. I have been in contact with the Beretta rep for the dealer where I purchased it, and he said Tikka is no longer manufacturing this rifle and he cannot even find a bolt himself. Does anyone have this bolt available or know where to get one? Thanks!

45ACP, Like new condition, not sure if it's even been fired outside of the factory.

Trijicon RMR, 6 factory mags, spare grips, original trigger, factory case, and all the goodies.

$3600 ftf in central MI or plus shipping & insurance via ship my gun.

ETA: I could make use of a decent spotter as partial trade. Maybe a ZCO 527 or a 7-35 ATACR, 10x NL Pures.

Clean Tangent Theta 5-25x56 for $3650.00 shipped and insured.

Purchased just over three years ago from hide member 1963Vette, has lived on sons 6.5 deer rifle ever since. Came with a scratch on the bell that is shown in the photos.

Happy to jump on a facetime call with any potential buyers.

Just saw he's calling for all out mass demonstrations against republicans nationwide. Well then, bring it! Texas is waiting.
Hey Sirh, this is your neck of the woods so are you in fear of your life? Oh wait, I forgot, don't you have a cannon

For sale Scalerworks LEAP/09 34” diameter, 1.57” height mount. Like new condition.

Part number SW0910

$SOLD shipped

This is the Moa version .
Mounted and shot once on a 22 rimfire. Box, paperwork , sunshade. $625. Shipped
Rings and level not included.
Check or money order .

Father was diagnosed with High grade large cell Neuro endocrine carcinoma metastasized to the liver. This seems to be a less common type and information is a bit more scarce. Any insight into treatments, outlook, and possible interaction from the vaccine that he took all 7 boosters () for? Thanks in advance.