I am regrettably selling my nearly new lefty PPR in 6GT. Turns out renovating a farmhouse takes time and energy away from competing.

GAP bedded the action and installed the long ARCA rail. I took delivery of it 2/24 and shot less than 150 rds thru it (I only have 104 logged but know there were a few undocumented). It also comes with a SAP Match Saver, & about 100 pieces of once fired Hornady brass. $2400 $2500 (bipod and brake not included)

The Leupold MK5HD scope (CCH reticle) is in excellent condition and tracks perfectly. It comes with ARC M10 rings, caps, and the level. $1700 shipped.

220 rds factory Hornady 109 ELDM in boxes. $330 ($1.50/rd) buyer pays for the ride.

I have a Brand New Aero Solus Action 308bf with their Obsidian Finish and a 24" 6.5mm Brux barrel straight 1.25 contour. The barrel was chambered for an ARC Nucleus Gen2 in 6.5 Creedmoor so it will have to be chambered for the Solus. The barrel has had 2k rounds through it the action has been played with but hasn't seen a single piece of brass.

I am selling these as a combo for $1000 plus shipping to your local FFL or will trade plus cash for either a Terminus or a Area 419 Hellfire Action. Otherwise I'll end up keeping it.

PM me if you are interested or have questions, I am not going to DM you first.

This grip module is incredible! It’s is meant for your hand. Only selling as I no longer have the FCU. Icarus makes a fantastic grip. I also have the offset extended mag release. I used this pistol for dry fire with one day at range to sight in my optic. It has been well taken care of. $SOLD shipped

Brand new Eberlestock Hi Speed II in Military Green with tags. Never opened or used.
Everything as is from the manufacturer.


Paypal F&F preferred/Check/M.O./Zelle

Hi all, i’m a rifle builder from the UK and i’ve been tasked with adding the clip/lug slot features and thumb slot on some E serial number actions. I’m not sure how accurate the builds will be but i’d like to get my part as accurate as possible.

I’ve been reading a lot of great information on SH but i can’t quite find what i need. As i understand it the original M40A1’s were retrofits from M40’s, and these actions had the true clip slot and double radius thumb slot of the 40X and machined by Remington. I have a technical drawing for this and it has enough details to get fairly close.

Then it appears any later supplied actions were machined in-house by the USMC. And these were machined with a simpler “lug slot” and single radius thumb slot. I can’t seem to find any drawings or technical specs for these features. If you look at the attached images i found on google it appears official drawings do exist and i wondered if anybody had a copy they would share? Or at least share specifications so i can get it close. Unfortunately in the UK there is little information.

Any help or input is greatly appreciated.

I have a couple dies I bought and am not currently using. Both sizing dies come with SAC decapping mandrels.

All three are in new condition.

SAC Dasher Sizing Die $265 shipped
SAC 223 Rem Sizing Die SOLDDD
SAC T.H.E. Seating Die Type 4 SOLDDD

Selling 1325 Berger Hybrids 6.5mm. All same lot 2863. tyd.

A mint condition SA VZ 58 Sporter Compact 7.5" in 7.62x39

Installed: Tactical Ambidextrous Mag release, tactical bolt release, back plate with the special bolt to install the folding stock.

Will include everything in the box, cleaning kit, 2 mags, and the owner's manual.

The folding stock can be shipped separately

Shipped to FFL $1600.00

Looking to possibly purchase a Smith and Wesson night guard 310 in 10mm/40
PM me if you have something.

She is one nasty hag!


She described the ammunition control as one that “[refines] how credit card companies track purchases at gun dealerships.”

Hochul noted, “This gives law enforcement the opportunity to find out exactly who may be stockpiling ammunition. And this is an indicator that something untoward could be happening, so it’s an important data point for us to have.”

North Country Now pointed out the credit card tracking will occur via the use of a new merchant code, and that code will allow the tracking of not only ammo purchases but firearms as well.

I once read an article, and in that article is had a phrase for when a scope is sighting thru the "st1" target hole and is focused or targeting a 2nd target for the same projectile to penetrative, what is the phrase or term called??

Thanks

I’m sure it’s all just a coincidence

Barrel Bag .. ( lengths ) are made to each individual members needs for Barrel length.
.. And it is the Same price for Barrel Bags Length .. be it 16" barrel bag, or a 36" length Barrel .

Bolt Pouches .. are either a ( Standard rifle Bolt ) or a ( bullpup, DT Bolt )
with also: DT, HTI (hard target intervention) Bolt pouch, and single Mag. pouch .

Magazine Pouches available - ( Desert Tech. and SAC .223 ) -- ( Barrett MRAD ) -- ( SAKO M10 .338LM, 5-Round )
( AXMC .338 LM, 5-round -&- 300 WM, 5-Round ) -- ( AIAW short action ) -- ( AICS short action ) -- ( AR-15/16, BCG )
.. Barrel Bags and Bolt Pouches come in ( 3 ) colors . . Black - Coyote - Multicam
.. 1000 denier nylon inside and outside and padded .
.. All Barrel Bags have PAL's webbing on front-side, to attach a Bolt Pouch with malice clip .
All Bolt Pouches have PAL's webbing on backside for attachment to Barrel Bag .
.. PAL's webbing and Malice Clips added ( on 'back-side' of Barrel Bags ) ' is extra ' .. ( 10-$ , Single-barrel bag ) -- ( 20-$ , Double-barrel bag ) .
Single-Barrel Bags are , ( 42-$ )
Double-Barrel Bags are , ( 70-$ )
Bolt Pouches, both Standard and DT, are , ( 35-$ each ) - comes with Malice clips .
Magazine Pouches ( 35-$ ) - comes with Malice clips .
Shipping is , usps flat-rate .
Just hit me with a PM here and will be given info if wanting the items .
-
Payment Type Accepted .. P.O. Money Order . or . personal check . or . PayPal payment .
. also note --> If you do chose to use my PayPal Addy., Send the PayPal as ( friend family ) . ....thanks
THIS ---> Paypal payment , please.. Do Not add ammo/firearms Info message along with your PP. payment . give me info here in PM , or hit me at my hm. mail .

-



-

( BigBore ) . DT - HTI . Barrel Bag . with connecting, Magazine Pouch . Bolt Pouch
-

---
ALSO ---> .. Have Magazine Pouches for :

Desert Tech. -- Barrett MRAD -- SAKO M10 .338LM, 5-Round -- AXMC .338 LM, 5-round

---

"you're wrong"

Ultralight Tactical Scope Rings, tube-diameter: 35mm, height: Low 0.885" With offset bubble.

Used but fairly good condition. The white paint are witness marks.

120 tyd Zelle/venmo

Only used for sizing a few (less than 10) pieces of brass. Never got my reloading bench set up and it’s not going to happen for awhile.

Winchester sizing die

.223 sizing die

For the details, see the order sheet. Looking at the website I believe these are considered the legacy mandrels.

$250 each shipped.

Russell Brand who has been decidedly un-woke... now has a line of MeToo types accusing him of shit...

This is the new lawfare. Speak out and they will get you.

On the same day as protesters were trying to blind Tesla employees with a laser.

Sure are nice folks, those mostly-peaceful left!

Sirhr

ZevOZ9 with Holosun 508T Green, Surefire x300 with box and docs for gun. Comes with 2 mags.

Trade Value-$1500

Looking for a full Kidd 10/22 build. Preferably in a Victor Titan or RPG Chassis.

Elcan Specter DR 1/4x FDE 762 - $1800
Great condition, it has a few marks down by the arms levers from my friend cutting zipties off with a knife and adjusting the elevation knob
My friend bought it new for his scar 17 then decided he needed the 1.5/6 version for it instead, so he sold this one to me
he never shot it and I only sighted it in on a 556 gun. its sat in the safe ever since.

Only trades I would consider +/- cash are
Leupold mk5hd 2-10/3.6-18 mil illuminated
Nightforce atacr 1-8/4-16/4-20 mil
nightforce nxs 3.5-15 ffp /2.5-10 mil
armasight sidekick 640
mcmillian xm3 stock
zermatt/bighorn origin/tl3 short action (action only)

34mm
1.44"
20 MOA

Was painted but I stripped 99% of it. No trades. Free shipping

Brand new unopened package.

SOLD

Save a few bucks plus tax and shipping from buying direct.




SOLD

Built this for a nephew and now he wants to just get a legend barrel for his LMT. Less that 150 rounds on it, never shot groups because we just zeroed it with the T1 and sent him in the woods due to limited ammo at the time. No optic or carrier, just upper with the bolt. Receiver is a new BCM and everything else is Wilson Combat. $675 shipped OBO

Everything works as it should. Not interested in parting it out but may be open to selling without the spigot extension. It's nice to have though.

$550 shipped (Paypal F&F)

Comes with
-bipod that has typical minor scuffs here and there from shooting matches
-rubber and spiked feet
-leg extensions
-AREA 419 spigot
-AREA 419 arca clamp

Looking to sell or trade my lightly used MCX 11.5 5.56 upper. Has seen 2 mags.
Comes with Dead Air flash hider and Midwest industries rail.
1300.

Currently setup for an AR with the AR cheek piece. But can easily be run on a chassis that accepts a buffer tube, such as the XLR and some MDT chassis. This will include the buffer tube and castle nut, everything you need to throw it on and go.

Asking $200 shipped to you. SOLD