3D printed single shot adapter for the Vudoo V-22. Works with all generation actions. Some minor fitting, sanding or shimming, may be required due to chassis variances. $23 shipped.


AICS pattern 22LR safety blocks. $20 shipped
AR-10 and AR-15 safety blocks $20 shipped
AICS SA safety blocks $20 shipped.

New, never fielded, EOTech Vudu Precision 1-10x28, 34mm, FFP SR-4 MOA sitting in a Nightforce Extreme 34mm FDE zero MOA mount. Built it up to sit on a future DMR project that never took off. As new and will ship as it did from the factory with all boxes, packaging, manuals and swag.

$1,250 shipped for the optic

$250 shipped for the mount

$1,500 shipped for the combo

USPS money orders or discreet electronic forms of payment accepted. IM/email for any questions.

I have a lightly used Leica 2400-R rangefinder with carry pouch, factory box with all paperwork and aluminum factory tripod mount....asking $300.00 shipped.

Is anyone running the S3 6x36 on their hunting or crossover rifle ? I've never used a tree type reticle before so was wondering if it covers up to much detail for hunting purposes. Also how does the S3 compare to the S&B 6x36 if anyone has used both

President elect Donald Trump!

Displayed on a table at event. Brand new just fondled a bit.

Looking for a Surgeon CSR or other 16" setup with an AI chassis.
Not looking to pickup something with glass, at this time.
Also open to options of barreled actions and/or just a chassis.

Like new condition. 6 rounds of 140 grain Hornady Match fired. $2,000 OBO. Feel free to make a reasonable offer. Will ship from my FFL to your FFL. Located in the Houston area if anyone happens to be local. All gunsmithing and assembly completed by Short Action Customs. I can provide any all documentation of build.

- Right hand, Zermatt TL3, standard bolt face, 0 MOA rail
- 16 inch Bartlein, FDE cerakote, M24 contour, 7.5 twist, chambered in 6.5 CM, threaded 5/8x24 with Q taper
- TriggerTech Diamond (single stage), set @ 1.5 pounds
- Q Cherry Bomb

Under 100rds, has Bergara 20 moa rail, Area 419 bolt handle. 2 mags

$900 shipped to ffl

PT Honcho Open Race Gun 38SC

Click to expand...

Round Count around 7K

Tevo Thumb Rest, PT Optic Mount

Click to expand...

1X Extra Locking Blocks

Click to expand...

Ill include a Sig Romeo 3 Max 6 MOA dot with it upon sale

Click to expand...

Asking
$4800

Brand new Tikka T3x Roughtech ranch in 223. Sweet little gun, hasn’t been fired. Just dropped into a KRG Echo chassis. Comes with KRG and original Roughtech stock, 1 mag.
$1150 shipped as pictured, PayPal F&F, Venmo, Zelle, USPS MO.

SOLD

Misc clean out to fund other projects. Will send pics upon request.

Oh, and I'd really prefer no trades. Trying to fund some other stuff.

Everything includes shipping
Everything is BNIB unless otherwise stated
Prefer PP friends (or +4% for goods), venmo
Included parts numbers to hopefully avoid any ambiguity


Precision Reflex Inc Accessory Rails:
1X Rem 700 SA BAR Straight Railed night vision mount 02-216-11
$200

1X Rem 700 Short Action BAR Straight Railed night vision mount
02-216-11 with missing hardware. Not in Bag. But it is new, just missing the hardware
$150

2X Rem 700 Short Action Bar Night Vision Rail Step Down
02-216-08
$200

1X Rem 700 Short Action Bar Night Vision Rail Step Down
02-216-08-648
$200

1X Remington 700 Bar Long Action Night Vision Rail
02-217-08
$200

1X Remington 700 Bar Long Action Night Vision Rail
02-217-08-648
$200

Ripcord LDP.R 15.15” Black
Ripcord Gas Block .750

PayPal FF or Zelle

Thanks,

Selling this barreled action I have no plans/use for. It's a Proof 16.5" 1:7.5 twist in 6x47 Lapua, . Threaded 5/8x24" on muzzle. Comes w/ Thunderbeast CB brake. Barrel has less than 100rds through it. Action is an original T3, bolt fluted and bolt/action and cerakoted by LRI. Sterk swept bolt handle and I believe a Sterk shroud but definitely a nice aftermarked metal shroud. Has the lighter Tikka trigger spring mod in it.

Here's the only "kicker". I purchased the action with the first half thread bunged up. I dialed the action in on the late and faced it off past the issue with the threads. Most of the Tikka "radius" at the front of the action is removed. I know alot of people do this so standard 1.2" diameter barrel blanks will look better and can be used. This doesn't change anything with the action other than standard Tikka pre-fits can't be used and your smith will just have to custom chamber a barrel like any Rem 700, etc action.

SOLD

Leica Geovid Pro 10x42
Full AB
Laser Centered (I sent it in awhile back, it’s perfect now)
Only used for a couple matches where it was mounted to a tripod.
$2150

Ruag is touting this design as some new BC gain in bullet design over a traditional hollow tip!? Looks like a traditional FMJ and ball used to stop the lead plug from filling the tip.

Anyone not following the scene .375 Swiss P is meant as a service cartridge to be shoot from actions with .338LM bolt face and mags , with .350g bullet it offers higher BC bullets and more energy on target at extended ranges.


https://www.edrmagazine.eu/ruag-ammotec-375-swiss-p-improved-performance-made-easy

Kahles 5-25i, model 10671. Left side windage, SKMR4 reticle. Mounted in ARC MBrace. Original box included but it’s beat up. Received in trade. $2500 OBO. Will potentially consider partial trades with around $1000 to me. No firearms unless a OU 12/20g.

Payment via Zelle or f/f PayPal. No g/s payments.

Or a check is fine.

~8 years old, ~1000 rounds, very good to excellent condition
on F4 in Utah
You pay F4 (only one if you're in Utah)
DT/EI 375 Cheytac with DT brake M1.5x22 $799
338 ULTRA SOLD

In interested, DM me to work out details.

Later, Frank
Bartlein Barrels

Good afternoon everyone, I have a question. Does anyone make a light weight metal chassis with a folding stock and short LOP in LH? I'm looking for something with an LOP of 12 to 13 inches (30-33cm). I've been looking at KRG and MDT. Anyone else have any suggestion?

Thanks

Add 1.8 lbs. to your Foundation Genesis stock and 1.0 lb to the Exodus. Machined from solid brass bar. Won’t rust. Kit comes with 22 weights.
Price- Genesis $110 shipped in conus and Exodus $80 shipped in conus. Please specify which stock when ordering.
Weights drop in existing holes and must be secured in holes by method of your choice. 2 sided tape, silicone, or bedding material.
#6-32 thread added to one end for easy removal.
Fit may vary
paypal-
PM for any questions.

Sr 25 upper kit

Troy upper/ lmt dust cover

Kac urx4 13.50 rail

Pri gas buster charging handle

Lmt bcg and bolt
Only sold as kit, will not part out

$1400

Add a 18” sons of liberty gun works 6.5 creedmore heavy bbl for $275

Recently built a precision AR with 20in barrels and looking for a good optic mount for it. Scope will probably have a 34mm tube and 56mm objective.

I’m assuming I’ll need a good cantilever type one piece mount so what’s good out there now? Height recommendation?

For sale is a never worn Sitka Ambient Jacket in Sublapine (msrp: $299)

150gr
Subalpine
2XL
No smells (non smoker), tears, stains, etc...

Asking $170 net to me shipped OBO

Selling a used in good shape Nordic Components NC22 sliding stock:

A non-revealing small foot print, making your weapon super compact for storage and carry.
Developed for the NC22 upper.....we also made sure that it fits our stock kit for the10/22 as well as the Ruger SR22
Identical in weight to a collapsible M4 Stock.
Deploying the stock is easily accomplished by pulling out on the butt plate
This butt stock gives you six length of pull options between 8-7/8" and 13-7/8", plus a fully collapsed LOP of 5-7/8".

$125 shipped, PPFNF

Thanks for looking