Leica Geovid Pro 10x42
Full AB
Laser Centered (I sent it in awhile back, it’s perfect now)
Only used for a couple matches where it was mounted to a tripod.
$2150

Ruag is touting this design as some new BC gain in bullet design over a traditional hollow tip!? Looks like a traditional FMJ and ball used to stop the lead plug from filling the tip.

Anyone not following the scene .375 Swiss P is meant as a service cartridge to be shoot from actions with .338LM bolt face and mags , with .350g bullet it offers higher BC bullets and more energy on target at extended ranges.


https://www.edrmagazine.eu/ruag-ammotec-375-swiss-p-improved-performance-made-easy

Kahles 5-25i, model 10671. Left side windage, SKMR4 reticle. Mounted in ARC MBrace. Original box included but it’s beat up. Received in trade. $2500 OBO. Will potentially consider partial trades with around $1000 to me. No firearms unless a OU 12/20g.

Payment via Zelle or f/f PayPal. No g/s payments.

Or a check is fine.

~8 years old, ~1000 rounds, very good to excellent condition
on F4 in Utah
You pay F4 (only one if you're in Utah)
DT/EI 375 Cheytac with DT brake M1.5x22 $799
338 ULTRA SOLD

In interested, DM me to work out details.

Later, Frank
Bartlein Barrels

Good afternoon everyone, I have a question. Does anyone make a light weight metal chassis with a folding stock and short LOP in LH? I'm looking for something with an LOP of 12 to 13 inches (30-33cm). I've been looking at KRG and MDT. Anyone else have any suggestion?

Thanks

Add 1.8 lbs. to your Foundation Genesis stock and 1.0 lb to the Exodus. Machined from solid brass bar. Won’t rust. Kit comes with 22 weights.
Price- Genesis $110 shipped in conus and Exodus $80 shipped in conus. Please specify which stock when ordering.
Weights drop in existing holes and must be secured in holes by method of your choice. 2 sided tape, silicone, or bedding material.
#6-32 thread added to one end for easy removal.
Fit may vary
paypal-
PM for any questions.

Sr 25 upper kit

Troy upper/ lmt dust cover

Kac urx4 13.50 rail

Pri gas buster charging handle

Lmt bcg and bolt
Only sold as kit, will not part out

$1400

Add a 18” sons of liberty gun works 6.5 creedmore heavy bbl for $275

Recently built a precision AR with 20in barrels and looking for a good optic mount for it. Scope will probably have a 34mm tube and 56mm objective.

I’m assuming I’ll need a good cantilever type one piece mount so what’s good out there now? Height recommendation?

For sale is a never worn Sitka Ambient Jacket in Sublapine (msrp: $299)

150gr
Subalpine
2XL
No smells (non smoker), tears, stains, etc...

Asking $170 net to me shipped OBO

Selling a used in good shape Nordic Components NC22 sliding stock:

A non-revealing small foot print, making your weapon super compact for storage and carry.
Developed for the NC22 upper.....we also made sure that it fits our stock kit for the10/22 as well as the Ruger SR22
Identical in weight to a collapsible M4 Stock.
Deploying the stock is easily accomplished by pulling out on the butt plate
This butt stock gives you six length of pull options between 8-7/8" and 13-7/8", plus a fully collapsed LOP of 5-7/8".

$125 shipped, PPFNF

Thanks for looking

Greyboe Phoenix, Remington 700 long action, m40 barrel contour, greyboe bottom metal. Has not been bedded. Action screws included. 400 shipped.

sold

I have a few things that I'm not using that arr just sitting in the gun room.

1. Warne Ramp Rings 34mm. $80

2. Era Tac 20moa 34mm rings. $200

3. Big Dog Steel AICS spigot. $80

4. Spartan ar550 plate. 8x10 and III+ $100

All prices are shipped prices and I accept check or ppff or discuss other.
Thanks

34mm geissele mount for sale

Price is $165 shipped

Small signs of use no box

I have a complete AMP Mate Revised, lightly used (~550 cases annealed using the Mate and case feeder), that is complete minus the allen key set. Along with both a Dillon casefeeder and the AMP Mate Casefeeder Stand Kit. A complete package to upgrade your AMP to an automated setup. Has worked flawlessly for me, I'm just no longer annealing large quantities of brass at once. Please feel free to reach out with any questions.

MSRP of ~$850
Selling for $675 shipped

Includes:

• Dillon casefeeder
  • w/ small rifle plate
• AMP Mate Revised
  • 3x shell guides (large, medium and small)
  • 2x feed tubes (large, medium)
  • Power supply
  • USB Cable
  • Associated manuals/documentation
• AMP Mate Casefeeder Stand Kit
  
  • https://shop.ampannealing.com/product/360/amp-mate-case-feeder-stand-kit/

WTS SAC Short Action Customs 6.5 Creedmoor Modular Sizing Die; full-length; bushing sizing. Includes 4 different bushing sizes, and 5 different expander mandrels. Also included is the default decapper included when you purchase the die from SAC. Has been used to resize ~1,200 pieces of Lapua brass. No longer shooting 6.5 Creed, and would like to pass along to another shooter who would use it. Tooling marks on locking ring (please see picture below). 5th expander mandrel is not included in photos as it is currently installed inside the die. Feel free to reach out with any questions. Thanks

MSRP of approx. $600
Price: $400 shipped

Included SAC bushing sizes:

• 0.287
• 0.288
• 0.290
• 0.291

Expander ball mandrel sizes included:

• 0.2615
• 0.2620
• 0.2625
• 0.2630
• 0.2635

Drinking season usually doesn't start for me until Thanksgiving, lasting through the holidays, but I will be be Early Drinking this year, starting Nov. 5.

I'll probably go with a bottle of Jim Beam Black.

I'll be taking Wed. off.

Only selling these two as a pair. One is a MDT 5rd mag with a primal rights BR kit and the other is AICS 5rd with a primal rights BR kit. I will include original follower for both. 308 of course. Take em both for $130 OBO shipped.

Next is a Hawkins hunter 3rd flush fit mag in 308/Creedmoor. $SOLD shipped.

Seeing if there is any interest in trading a Leupold MK5 5x25 PR2 MIL + DI Wind dial + Hawkins Rings for a NF ATACR 5-25, MIL-C (MRAD).

Willing to sale the Leupold as well. Could include a DI Wind turret and Hawkins rings for additional money.

Would sale scope for $1,700.00
Would sale scope and rings for $1,900.00
Would sale scope, rings, and wind dial for $2,000.00

It’s morning in America!

Let’s make American better than great!!!

Login to view embedded media
Deportation line forms on the left…. All those for deportation please queue on the left.

Sirhr

Brand new in box, never even opened Vortex Strike Eagle 5-25x56 MIL EBR-7C scope. $550.00 and that includes shipping

I have brand new Zev Tech OZ9 9mm that was ordered in for someone and they didn’t want it. These seem to be selling for $1600-$1800. $1475 shipped. If paying by card add 3%. The part # is OZ9-STD-B-BRZ if you want to google the exact one.

I have a brand new Leupold VX6HD 4-24x52 CDS-TZL3 with the
Impact 23 MOA reticle. Part Number179293. This is brand new, it was ordered in for someone and they never picked it up
$1650 Shipped. New these are over $2000 everywhere i can see.
Credit cards accepted.

Right hand
Short action
Midnight bronze
Non-folder

Includes all hardware, MPA bipod pic rail, (1) AICS 5-round magazine, and box.

Excellent shape. Extremely minor cosmetic wear from installing the barreled action. Awesome chassis, just doing some down sizing. $550 shipped.