As many of you know Geissele won a SOCOM contract and has been making deliveries of a small framed AR chambered in 6mm ARC. These comments are from my son who works with Naval Land Warfare.

The teams really like the rifle. Geissele won a pretty grueling competition and apparently they were very innovative. Some of the specific things that Geissele did include, a redesigned feed ramp for increased reliability with the 6mm. Steel inserts in the upper receiver to again help with reliability and durability with the higher pressure. A completely redesigned BCG made with a new steel that increased service life by 300%. A CHF chrome lined barrel that is getting close to the same accuracy as a stainless barrel with almost 200% more life between replacements. A ground up redesign of the magazines which apparently is a big deal. They are straight mags, not like 6.5 mags with the curve. It allows the use of current plate carriers without having to reconfigure them. The DMR guys like that they 6 ARC effectively has the same range as the .308 and similar wind fighting capability but they are able to carry 40% more ammo then a .308 loadout and still are lugging around less weight. For those of you that care, they are pairing them with some kind of 3x20 Schmidt and Bender short scope. The current accepted loadouts include a 14.5" variant and an 18" variant. They are currently evaluating a 12.5" variant and I think he said a 20".

I got both in a trade and never used either so I’m trying to get some funds for another project.

BCM Mcmr 9” m lok handguard. It was on an upper I traded for and I put a different rail on it. SOLD PENDING FUNDS

Surefire Scout light FDE with mlok mount. Works good. I never even mounted it or used it. $175 shipped obo

Will consider trades for ar uppers or upper parts. Would consider trading both for an Eotech exps or Trijicon mro. Would also trade for threaded savage short action barrel depending on the caliber. Also interested in red dots for pistols

Let me know anything else for trade. Never know what I might like or want.

WTS

ScalarWorks LEAP 1.57” 30mm w/ RMR kick mount

Like New

$400 Shipped

Hello all, just picked up my Bargara Ridgeback .300 PRC and while doing a functions check with a live round from the mag the rounds get stuck at the end of the bolt cycle and won’t eject. Haven’t shot the rifle yet just wanted to see how it feeds and ejects and just won’t eject. Be honest just upset just spend 2k on a rifle that’s doing this, this is my first Bergara wanted to try them after using Tikkas for some time. Any help would be appreciated.

Any suggestions?

Trying to keep it light, I wanted to put it in the KRG Bravo as it is the right price, weight, and has the features I wanted. But apparently it requires some modification and I don't trust Dremel skills.

Leupold VX-L 6.5-20X56. Target Turrets, Varmint Hunters reticle, 30mm, Side Focus, and the very hard to get Alumina covers. Rings included. $1000 shipped.

Reduced $900 shipped.

Reduced $800 shipped.

Tangent Theta TT315P 3-15x50 Gen 2 XR with Tangent Theta Throw Lever and Nightforce Ultralight Rings. Original docs and box and sunshade included. Excellent condition.

May consider partial trade on lightweight hunting glass.

$spf

Mil reticle
Has been on a .22 with maybe 3 range trips. $260 PayPal f/f

I'm only selling because I want to upgrade this summer. Price includes shipping to Lower 48, US Only. Prefer Venmo.

We got to start fighting fire with fire and play/expose the lefts games with them. These states like Commieforna that want to make requiring an ID to vote against the law ok let's organize bus loads, carloads, truckloads, motorcycle rides whatever it takes of people to show up and vote at these places to offset the known cheating. We need to encourage people in those states to vote often. If I lived in one of those states, I would take the whole week off and just drive from voting place to voting place and vote as many times as time would allow fuck it why not? They can't ask for ID why not. Before someone says well they could get you on camera at multiple voting places. My answer for that "I didn't actually cast the ballot I just wanted to make sure the ballots were correct" How can they prove otherwise. Could you imagine if a busload of obvious Trump voters showed up how quick they would reverse policy and ask for an ID.

Beretta 12ga a400 xcel sporting black edition with kick off. 30” barrel. IM, IC, C chokes. Excellent condition. 500 or so rounds through it, very smooth.
Pro lifter available for $50
$1450 obo shipped ffl>ffl

PayPal ff or add fee.

Another brand new full power PEQ 15, DOM is 2020.

$2250 shipped via USPS priority

Switching up my hunting rifle. Looking to sell as a package including the following. Not looking to split up at this time. Rifle shot great and killed a couple deer for me with the 110 accubonds. Overall it is in great shape, round count is around 100. Asking $400 tyd

Barrel- Wilson Combat Recon (fluted) 16” 1-11 twist 6.8 SPC II barrel with their black “Tuff Armor” coating. Also including the Aero mid length melonited gas tube that was used for it

Bolt- Wilson Combat NiB coated 6.8 bolt

Loaded ammo-
-42 rounds of 110 Accubond SSA ammo
same lot number
-41 rounds of Hornady custom 120 SST
-8 rounds of 115gr federal fusion

Bullets-
-100pcs 120gr SST unopened
-84pcs 85gr Makers Rex (similar to Barnes lrx)

Dies- Lee 3 die set w/ shell holder

Curious what the consensus is on this cartridge. Fad or just starting to break out of its shell. I don’t see wide spread adoption as many states have outlawed it for deer hunting and lack of weight may inhibit it for long range and wind. What do you all think?

I want either a 6 or 22 creed.

I thought I was going to get back to USPSA shooting, but I'm not. This is the pistol with everything that came with it originally, holster, 3 magazines, all the different sized backstraps, mag well funnel, plates for various dots. Two of the magazines have T/F magazine extensions making them 22 rd capacity, 3rd is std 18 rounder. Also Cmore dot with probably 300 rds on it. Asking $600, shipped and insured to your FFL.

Looking to purchase used or new, appreciate the help.

Bill

I am having a rifle made. I found a stock at a retired gunsmith who is selling off this stock. He claimed it was Carlos's and was wondering if I should refinish or keep original. I don't doubt the validity of the smith.. local pastor..photos of the two of them... eastern North Carolina..ect. Just want to do right by him..

MPA Competition Side Rails for BA / Hybrid. $99 PayPal F&F

I wanted to run Lapua or Alpha brass but I can’t seem to find it anywhere in 30-06. Hornady, starline and nosler are available are these good options?

Don’t mind shooting the cheaper brass in my .270 but wanted to shoot quality brass in my 30-06 as the plan is to stretch out to 1000 yards.

MDT - Control / NV Bridge - Black - ACC Elite

Please note, this is missing one fastener

Asking $SOLD plus your preferred shipping

Hey guys! Just thought I would share how I handload my 17HMR ammo (and other rimfires) for extreme consistency and ELR shooting. I also reload spent brass, but am not covering that in this video. Another video to come for reloading this winter. Just know, this is NOT cost effective at ALL. I do this because of the performance gains, not for saving money. It's a very time consuming and labor-intensive process, but well worth it!

Login to view embedded media

6 GT barrel cut for a Kelbly's Atlas Tactical, Benchmark med palma 7.5 twist, chamber done by Straight Jacket Armory -$700

100 piece of unfired GAP 6 GT-$75

RCBS Match master 6 GT die set-$125

$800 for all of it.

Would like to sell barrel before I split it all up.

I need to find somebody in or near glens ferry Idaho with a reloading press can make it worth your time took wrong ammo to finale and need to seat them to depth.

Hello!
I've purchased a like new second hand Trim Pro 2 with universal Shell holder.

However the trimmer have an issue, the pilot are not allineated with the mouth of the case, and when trim the mouth of the neck come out crooked.

I suppose that the shell holder are not paralel to the support.

As soon I post some photos...

Can someone tell me how I can operate for resolve the issue?

Thanks