Excellent condition Hensoldt Spotter 60. Hensoldt marked. Has kill flash, backlight tube (so that when you are larping at night you can look through your spotter without worrying about dangerous IR light cooking your eyeballs), 3x picatinny rails, multicam cover, manual, and soft case. Illumination works. Barely used.

L Reticle.

Working way more now a days and larping way less.

4K shipped next day air. - SOLD

Bank Wire or CC +3%.

Sold

I have an extra barrel that came with an Axiom I bought. Hawk Hill blank, Marksman contour, 1.254" and 0.873", threaded 5/8-24. I don't have a bore scope but knowing the previous owner, it hasn’t been abused. They have been used in PRS comps so may have some scuffs/scratches. The member who bought the top barrel was pleased on how well it shot once installed.

Top barrel; 26" 6.5x47 1/8 twist has 913 rounds on it, chambered by Pendergraft. $375 shipped

Bottom barrel; 26" .308 Win 1/10 twist has 513 rounds on it, chambered by Gradous, $300 shipped FIRM

PP f&f, check or m/o, shipped to the lower 48.

Thinning the herd to fund a new 6mm. Have my B14R done by Modacam. It has a 24” Kreiger barrel with a 1:16 twist with a 1.2” full barrel. The bolt has been polished, lift ramp contoured, and Crossroads Precision aftermarket parts. Will come with a Timney Hit currently set at 5.5oz but is adjustable obviously. None of the chassis are included but are shown as examples of how it fits in an ACC elite.

Will include 3 B14R mags. One standard, one with +2 L3I ext, and one with Hoz & Shield +5.

I actually got this rifle from Josh on Pursuit of Accuracy. It is a laser beam! The BA is the exact one shown in the video below;

Login to view embedded media
Price is $1500 shipped CONUS. Only trades would be a 6GT barreled action or similar

I went through a process of trying to find my lands, building some dummy cartridges the other night, by turning up the bullet seating die micrometer tool, and testing each one in the gun (locking down the bolt). I tested the overall length of the cartridge before and after inserting into the chamber and locking down the bolt. I did this until I reached the point at which a cartridge became shorter by locking down the bolt, signifying it had jammed into the lands and locking down the bolt forced the bullet deeper into the case. I created a model cartridge that I felt best represented the OAL that would insert into the barrel and just touch the lands.

There were a few cartridges that did not repeat the overall length, after seating the bullet into the case with the micrometer die, and the overall length was as much as .015" short, when measuring the OAL. I figured this method could not account for the variation in the tips of the bullets or something, and I wanted to do better, so I bought the Hornady OAL Gauge Tool and the Bullet Comparator with a modified case for my 6.5CM.

I set everything up and inserted the modified case/OAL tool into the barrel and locked it down, and then pulled the cartridge out and measure it (to the 0give this time) with the Bullet Comparator tool. I then compared that cartridge to my model cartridge, and the Hornady modified case cartridge was .053" shorter than my model case. Whether I measure the OAL of the cartridge (head to tip) or I use Bullet Comparator Tool in my calipers, I still end up .050" shorter with the Hornady tools than I do with my model cartridge I created to just touch the lands.

What could be happening here?

I have 12lbs of IMR 8133 for sale and will ship via my FFL.
Want to sell as one lot to save on fees.

Does anyone know where to buy a steel tennon thread protector for 1.0625 x 16 threads? The thicker, the better. I am trying to make a fixture to clean my barrels. I have 7 barrels for my Zeus and would like to be able to clean barrels without threading them in to one of my actions.

Has anybody tried this scope mounted LRF? Youtube videos are positive. Warranty is very limited (one year, and for manufacturing defects only).

Amazonia link:


Intended use is on a crossbow and a lightweight 30-06 hunting rifle with heavy recoil.

Main concerns:
Does it survive heavy recoil?
Does it last more than a year?
Does the warranty mean anything?

Feedback from anybody who has tried it would be greatly appreciated!

Namib Desert Hunter

Can anyone touch on the improvements between the VCOG 1-6x vs the VCOG 1-8x? My main point of contention is the brightness settings. The 1-8x has more settings but, is the highest setting on the 1-8 the same brightness level as the highest setting on the 1-6?

Anyone who has experience with one or both of the optics please guide me in the right direction. I'm looking to purchase one or the other for my 12.5" do it all, go to "pistol". I've decided on the VCOG because of the robustness of the scope and the AA battery life among other reasons. Also, I'd love to see some more pictures of the mil/mrad reticles for both if anyone has some handy.

Any help will be much appreciated.

WTB or trade single stage trigger for a 2 stage Tikka Tac A1 trigger. I know it’s a longshot, but somebody’s gotta have one or two sitting in their parts bin.

Selling this complete ZRN coated Noveske AR-10 BCG. Sold the rifle so don’t need this. 350 shipped. OBO

Everything has been very lightly used.

SOLD RCBS Rock Chucker Supreme with Inline Fabrication Mount and eject kit (this automatically kicks your brass into the bin once you pull the ram down) - $180
The Rock Chucker has the Hornadny LNL bushing in it, but will include the standard die thread also.

SOLD Matchmaster Powder Dispenser with box and a piece of granite to set it on. Granite helps reduce vibration/increase scale accuracy - $600 shipped

SOLD Auto Priming Tool with Inline Fabrication Mount and 3D printed grip - $100

Very interesting interview.

Login to view embedded media

Redding Powder micrometer measure with brand new Drax Worx Pyrex hopper.

$80 shipped

Brand new in box ACC Elite in Titanium Blue (see pictures). Offloading some gear from builds I’m not going to complete soon to have extra funds for Christmas. Sold.

Like new SIG Kilo 2200 BDX 7x25 Rangefinder.

$SOLD

PayPal Accepted

Leica Geovid Pro 10x42’s

Like new, no marks or scratches. Used a couple times hunting and always in a bino harness. Glass is perfect.
Comes with box, manual, lens caps, case etc.

$2300 OBO shipped

$1700.00

First unconditional "I'll take it" gets it.

Accuracy International AI AXSR AICS Short Action Chassis for Remington 700
$1,700(SPF. Back up offers only.)
- Includes Shipping via UPS Ground to CONUS

If you want more specs, I bought it from Mile High. Here's a link:
https://www.milehighshooting.com/accuracy-international-axsr-aics-chassis-rem-700-sa/

I can do Paypal or Venmo.

Seekins 35mm rings 1 inch high lightly used . $100 shipped

Both are 6.5. Each have been cleaned and new inserts installed.

Polished is SOLD shipped

Brushed with Cerakote Black tuner is 225 shipped

Like new used condition RCBS primer pocket swager for small or large primer pockets. Original hardware is included. SOLD (lower 48) PayPal f&f. No trades.

Your view if you're one of the agencies targeted for waste reduction...

New never mounted Hopco HS02 .
$60 shipped .

F1 Firearms stripped upper
Style 1 UDR-15-3G

New condition in the box.

$90 shipped to you

I just went through a process to find the lands in my barrel, by disassembling my Savage bolt, and removing the spring loaded ejector. During this process, I realized my resized cases would not allow the bolt to fall smoothly, without interference, when testing to see if the bullet was touching the lands.

I solved that issue with some new Lapua brass, but it got me looking more closely as to whether or not my Forster full length resizing die (with interchangeable neck bushings) was actually doing anything. I put some once-shot Federal brass in the die and it doesn't appear to be resizing the body of the case at all. It is making the neck smaller and lengthening the case though.

The dimensions on the case at the top of the body, near the shoulder, and the dimensions of the case at the "web", near the case head, appear unchanged. These dimensions are still larger than the specs the Hornady book suggests the case should be. I can still get the case to load, by turning the bolt down, but it is not interference free.

Should my die be resizing the brass to the book specs or smaller, to better fit in the chamber, or do I want a pretty tight fit with the cases?

Looking for a semi-heavy McMillan Tikka Inlet stock. Open to model and bottom metal fitment. I don't mind having to open up the barrel channel either