McMillan HTG M40A1 stock, M40/M24 barrel channel, 3lbs 4 oz, molded in forest camo, stock has been inlet cut for M5 bottom metal, currently Hawkins bottom metal in it. Will come with bottom metal. $850.00 shipped.

I'm seeing that the face of the Tikka action has a little bevel or chamfer around the circumference. Because of that, you can't spin on a 1.200" barrel without a little trench forming there at the junction. I'm seeing that some people have their receiver faces turned down to eliminate that bevel. My questions are 1. To get it completely flat, do any of the threads start getting removed when facing that receiver? 2. For those of you that have had theirs faced, what are the max barrel outside diameters that you can run now?

Used beggars B-14 HMR. Has 180 rounds through the barrel. $900 shipped to your ffl. I’m in Cheyenne Wyoming so if you’re within driving distance we can work something out. I also have some lapua brass. 40 rounds once fired 60 virgin I can through in for another $50

I have a new never fired 6 Dasher Prefit for an Impact 737R for sale. Cut by SFS Customs.

Bartlein Barrel, MTU Steel, 150 FB, 7.5T, 28”, with 5/8x24 muzzle thread.

Asking $575 shipped OBO. PP F&F or you pay the fee’s

I’m looking at a Steiner T432 prism red dot 4X36MM. Does anyone have any experience with one or with Steiner In general. I haven’t seen many reviews out there for them. I’m curious what others think before I purchase. Link below to optic im referring to.



https://palmettostatearmory.com/steiner-t432-ar-rapid-red-dot-sight-w-5-56-reticle-8797-556.html

Krieger Blank 6mm
HV contour
.236
5R
29”

$300 shipped CONUS

Remington 700 in 308, in HS Precision PST012 stock inlet for M5 bottom metal. Includes Badger M5 DBM and 1 Magpul mag. UPDATE - Just the BA for sale

Now, for the “M24” part. The action is a G series, with factory 8-40 scope base holes, bolt is Sandstrom Gray coated and last 4 are stamped on the bolt handle. Factory Remington M24 barrel stamped “308 WIN” with Remington proof marks. Has some finish wear. Only weird thing about the rifle is it had old school rifle sights installed by Remington. Don’t ask my why. The upside is the front screw holes are the correct position and spacing for a redfield front sight base (I have a .225 one if needed). Downside is the rear scope holes on the barrel just sit there. Cover them with a MIRS or MARS and no one will be the wiser.

$700 shipped for the Barreled Action.

SOLD

Here’s a message I just received from someone when I replied to a thread for an item for sale that I had previous communication with and this is not the person who made the thread. I have already reported the person. And sent an email, just wanted to keep everyone informed…. It’s almost like they didn’t even try, username is no where near similar.

Here is the link to where I posted and
https://www.snipershide.com/shootin...-apa-gen-3-fat-bastard.7226287/#post-11801496


Here is the post and link to the person who messaged with me and a screenshot.

https://www.snipershide.com/shootin...n-3-fat-bastard.7790706/#convMessage-11154050

Up for grabs is a new Bergara B14r, .22LR. I picked this up to carve a stock for, but ended up with a 16" 308Win.

$800 - Barreled Action w/Triggertech Special
$650 - w/Factory trigger

Original box, papers and one magazine.

Leupold Ultra 16x-M1a target dot scope with Butler Creek lens covers $1200 shipped postal money order for payment thanks for looking geoff3.

Snowy Mountain Rifles Chamber and Thread Cert $200.00 Expires 11/5/24 so you will have to use it quick!

Will send pic of cert once payment clears.

PayPal FF, Venmo, USPS MO

Looking for some input regarding switching to night vision to night hunt instead of thermal. I have the Agm rattler ts25-256 thermal that I’ve been running and it seems to me that, as far as target acquisition goes, you can get into a “good” night vision setup for cheaper than you can get into a “good” thermal. From what I understand it’s cheaper to get a better IR Illuminator than a thermal with I higher resolution thermal censor. Plus I like the fact that you can differentiate your surroundings better with night vision where as if I miss coyote with a thermal it’s common that I shine a light and there’s a lot thicker brush there than I could see through my scope. Am I on the right track with my thinking? If so what are some good options for night vision optics and IR lights for sub $1500? Thank you

I have a like new in box Steiner m7xi 4-28 with MSR-2 reticle. Comes as shown with box and factory goodies.

$2640 shipped
***SOLD***

---

SCOPE AND SPUHR MOUNT SOLD

ZCO 5-27
10 mil NLE
Mpact 2x reticle
Used condition

Scope in in excellent shape except for a small blemish on the objective bell(probably came from a barricade.....see pics for details) not noticeable but wanted to mention it.

Scope will come with one of the mounting options listed below

A) area419 matched rings. 1.1" medium height
Scope & 419 rings $3350

B) Spuhr SP-6602 mount.( I dont have the leveling wedge for it)
1.5" height, 20moa
Scope and Spuhr mount: $3500

Prices are shipped and if insurance is desired
the additional cost will be the responsibility Of the buyer.

Shipping will be via UPS with signature confirmation

Payment options: pp, Venmo, or pmo. If using PayPal please add the fees or pay ff.

So I got bored, have this Swiss model 1911



Looked around and saw they are still only 500 ish dollar rifles so fuck it, gonna chop it apart. The 7.5x55 Swiss is still a fantastic cartridge, along with this ones bore is superb, gonna leave it be and keep its barrel. Chopped it down to 16.5 inches, and lopped off the stock



Ordered a Williams sight that fits it. Drilled and tapped the reciever for the Williams, cut a picatinny and drilled and tapped the flat from the old rear sight for the picatinny(scout scope or rmr), drilled and tapped barrel for the front sight. Already got a couple coats of oil in the stock a ways to go on it.

Still need to thread the barrel and decide on a brake.

I know it’s gonna make some lose their shit but it’s mine so suck it

Selling a brand new Vortex Radian Carbon tripod with ball head. Comes with carry bag, kit, and arca plate.

Asking $600 shipped obo.
Thanks for looking

Two McMillan Game Warden stocks for sale. Both are in excellent condition and have not been bedded. $600 shipped each

#1. 700 SA clone, olive marble molded in camo. Inletting for Defiance medium, (700 SA) length, Remington sendero barrel channel, M5 bottom metal. 2 front swivel studs, bottom rear flush cups, 2 LH side flush cups. 32 oz, adjustable cheek piece( SOLD)

#2. 700 LA clone, (top pic)olive marble molded in Camo. Originally ordered as a 700 LA but ejection port and bolt release opened up for a Defiance, Proof Sendero barrel channel, M5 bottom metal, 4" front picatinny, bottom rear flush cup, adjustable cheek. (SOLD)

Check page 2, schematics for a bolt gun! HK USA announcement reference somethings coming out in the fall/winter. This will be great for the bolt gunners.

Like new Geovid Pro. Used a few times, works great.
only selling because my vectorx are in route.

comes with leica soft case and strap.

Paypal,venmo ff or zelle.

$2275 shipped.

I have searched the internet but failed to find an answer.

As such, I am asking here.

Do the Colt-style 9mm magazines used for PCCs load top-down like a 5.56mm AR magazine (double stack / double feed) or do they load like a Glock magazine where you push the cartridge down and then slide it in (double stack / single feed)?

Any information would be appreciated.

Thank you.

-Stan

For sale, as the title states. Bit of scope rash but functions perfectly fine.

$SOLD on EBay

obo shipped insured.

PP F&F or Venmo

Cross posted on Ebay and a FB group

In an extended conversation on another forum, a couple of folks are claiming that when shooting AR's, they consistently get a POI shift in the last round fired on a given magazine if the round is also the last round in the mag. This seems unlikely to be a mechanical thing to me, but I wanted to check and see if that sounded plausible to any of you guys?

Lightly used Evo Pod with 8-11" legs
Long sitting length 16-23" legs
Spiked feet

$375 PayPal f&f shipped to lower 48 with USPS insured priority mail.

howdy all, I have a savage 110 (long Action) that I've been dry fire practicing with. I've noticed that if I run the bolt fast while closing the bolt it'll hang up. I've also noticed that there is an awful amount of slop/wiggle while the bolt is open. is there any way to fix this/ tighten it up? This hasn't effected the accuracy of the rifle at all but its just annoying when I run the bolt it'll hang up and move the rifle off of the bags/rest.