I have 3 matching lots $520 shipped.

Very good condition A419 Hellfire in stainless finish, for 6mm caliber. Comes with the adapter (5/8x24). I have *an* OEM box for it, just not sure if it's *the* box. IOW the label may say it's for a different brake. What you see is what you'd get tho.

Works great, I just have some sort of brake procreation situation going on over here, and need to thin the herd.

$110 shipped, PayPal F&F only, or Venmo preferred.

MDT SCS buttstock carbine # 102856
New in the box.

$350 shipped to you.

SOLD​

I have 2 units for sale. Both come with the Brandt fiber optic upgrade. Both Brandt systems have the "rotating ocular setup." Both will come with extra fiber optic cables to setup, if needed. And yes, original mount (picatinny) and boxes included.

$230 each shipped (no, I will not separate the Brandt setup)

Selling this catch and release NX8.
Has three micro specks in it that you can't see in pictures. External lenses/coatings look great. Specs are only visible from 3x-5x. Lower than 3x they're too small to see, higher than 5x they're out of the window.
Besides that, the scope looks great.

I've seen NF fix these specks for free, I just don't have time to fool with it right now and need cash.

$1200 shipped.

I needed to shorten the catch release to use a WSM magazine in an MDT Timbr chassis/stock.

I filed the catch down until the magazine locked in and would not come out pulling on the mag.

It now drops free on recoil.

I replaced the spring. Same problem.

Is the catch too short or too long?

Thanks for the help.

SOLD

Action: Defiance Anti, nitrided
Barrel: 24" Bartlein Carbon #4 , 1:8.5, chambered in 280 AI
Round count: 950
Stock: Manners LRH with mini chassis
Bottom Metal: Hawkins Hunter with 2x mags
Muzzle brake: Hawkins 2-port
Trigger: Trigger Tech "limited edition" 1.0lb-3.5lb

Brass: 190 pieces of 3x & 4x fired Peterson
Dies: Redding master hunter set.

$2500 shipped for all the above. Would use the shipmygun service. Money order, check, or PayPal f&f.

All work done by Zach Tanned at Misery Customs. The rifle shoots really well with 180 and 185gr berger hybrids and h1000. It has been hunted with and shot, so has a few scuff marks. I'm selling due to an eye injury forcing me to shoot wrong handed.
It weighs right around 7.5 lb

The S&W 460XVR has a gain twist barrel.
How would this affect the performance of 454C and 45LR rounds that were not designed for this type barrel?

Anyone have direct experiences?
Any good reads about this?

Running a Precision Rifle Class soon October 20th
It’s 1.5 days with first being in classroom discussing weapons, gear and ballistics. Second full day is on 100- one mile range in Immokalee
My background is former SWAT Sniper, SWAT Sniper Instructor certified POST, Long Range Rifle Competitor with many National and International Shooting awards plus military contractor. Prior Guest Instructor US Army and USMC Snipers.
Second Instructor is John Rusyn Police and US Army Precision/Sniper Schools experience Many deployments to Afghanistan and Iraq in US Army and Military Contractor

Sign up through Shoot Center Cape Coral


Here is quick bio Lapua wrote about me


If you are experienced shooter first half day can be waved if you have to travel a long way but I suggest you attend

A bonus is in this class I will be showing ( Not a sales pitch) new sling system I am bringing to market that should blow everything else out of the water. This will be short demo
Only as this is about shooting not selling gear

Howdy Folks,
Was the bottom metal on the 1960's M40 steel or aluminum?
Thank you,
Barlow

Looking to sell my Leica Geovid Pro’s, they are 10x42, have AB Elite unlocked, comes with all original equipment, and aziak arca mount. They are in very good condition, have lived in a bino harness when not in use. Model 40816

Looking to get $2300sold!

I've got a LNIB Redding Small Base Body Die for .260 cases. I bought it several years ago and used it once for a few cases, but it's practically brand new, still in the box.

40.00 35.00 - Shipped PayPal, Venmo (F&F).

Like new Accu Tac 34mm High rings
$130 shipped

Videos showing a MOB of hoodrats unloading a parked train container using cars/suv's/box trucks , one rocket scientist posted a STACK of TV's in their backyard for sale on facebook . Made me kinda feel left out because none of my friends ever call me when these events occur .

Up for sale is a muzzle device I switched out for a hell fire and am not using

Threaded 5/8x24
.308
Comes with the jam nut.


$50 shipped.

Looking for a used 34mm cantilever mount in either a 1.7 or 1.93 height. Let me know what you got!

looking to sell this gen 1.2 long action nucleus with 20moa rail. Used for 100-150 rounds with a 300wm barrel. $shipped to an FFL. The

Less than 1000 rounds through this right handed 737, .308 bolt face, comes with a Bix N Andy Dakota. NOT AW cut, just runs AICS SA magazines. Excellent condition, ships to your FFL.

$1300 shipped with trigger included

Hi all, I have an AXSA in 6.5 cm which I absolutely love and have shot some PRS matches with. I’m still a beginner but I’m trying to decide if I keep this or sell it for something below.

Impact 737r in MDT acc elite chassis
- lightest and smoothest bolt lift of the three to keep my on target?

Terminus Zeus in MDT
- I want a quick change barrel system
- heard the bolt lift is heavier than impact

Keep AXSA
- love the quick barrel change
- love the look and ruggedness
- don’t love the hump and balance point for shooting off bags/barricades
- obviously other ergos and support for this rifle are lacking.
- I’ve started adding a lot of weight to try to keep the recoil down so maybe that will be good enough? I’m current at 22lb thinking of even pushing to 23lb.

What are some other pros and cons I’m missing.

Also considering getting a new barrel for axsa, or if I move to custom, going with a different route than 6.5 cm.

I’d like to shoot factory ammo at least for another year or two until I have more free time as I know it’s a bit of a chore. So I’m also having a dilemma on calibers. I shoot 6.5 but I want lower recoil to spot traces and misses better. So I guess my options are staying on 6.5, moving to 6mm cm, or 6 dasher or gt.

6.5 Cm
- tons of factory ammo
- higher recoil so follow up and tracing / spotting misses are harder?
- bigger splash if I do miss so maybe that makes it easier on spotting misses longer?

6mm creedmoor
- lots of factory ammo and always in stock
- less recoil than 6.5 cm
- higher velocity so less barrel life which I’m not too concerned about
- higher velocity makes spotting misses harder since it’s faster?

6 GT
- factory ammo but it’s expensive and limited
- closer recoil to dasher

6 dasher
- easy button for PRS due to recoil and ballistics
- have to reload which I don’t have time for but I’d like to shoot this caliber of any just wish there was factory ammo.

Help me decide I’m so torn.

Anyone have a decent priced hand held thermal they would recommend? I have a clip on. But would like to have something to look around with instead of looking through the scope or taking the clip on off to look around.

Want a 22 caliber rifle that's capable, low recoiling with good component availability. The 22-250 AI launching an 80-90gr bullet looks really good. 223 AI also looks good and has the best component availability. These are my 2 frontrunners.

224 Valk and 22Nosler aren't truly unobtainium but they're scarce and expensive. And the 22-250AI outperforms them anyway.

Are there any pitfalls to these calibers like apt to form brass donuts or no reamers available? What says The Hide?

SOLD
BNIB Vortex Defender CCW 6moa


$180 Shipped SOLD
PayPal F&F or you pay fees.

Magpul Pmag M3 300blk 11 20rd magazines. 5 of them have Hornady Black 300blk 110gr. Can sell with the ammo or just empty magazines.


$110 shipped for 11 magazines only.


$185 shipped for 6 empty magazines and 5 with the Hornady ammo in them.

PayPal FF, Venmo or Zelle

WTT NIB ZCo 5-27 FDE MPCT2X for NIB/LNIB TT

I have Zco rings that can go with it.

I was interested in the quick change actions from Zeus and Curtis valor.
If anyone has some personal insights......

With these quick change systems it appears you have a little less barrel threads going into the action with the set screws to hold the barrel in.
I'm wondering how durable this design is in the field when your hunting or running and gunning in a tactical match rather then a PRS style match where the gun is subject to alot more stress or falls. Say my can is stuck and I'm trying to get it off, for examples.

I guess it's all tension based like the lug and seekins style quick change designs....

Id have more piece of mind if the channel in the threads has a dimple like a AR-15 gas block to make sure it doesn't un thread...