490 bullets. Paypal or Venmo. Bought 500- shot a few load developing. $90 shipped

One box plus25 $22 shipped. Paypal or Venmo

Decided I liked coyote hunting more than PRS, so I’m selling my rig. East Texas Precision 6mm Creedmoor. Foundation MG2 stock with arca rail. Defiance Tenacity short action, Bartlein Heavy Palma 7.5 twist barrel at 26", Jewell R700 trigger at 1lb, Area 419 Hellfire brake. Satin Black Cerakote on barrel. Hornady ammo and 800ish ATips. 300 pieces of Peterson brass and Redding dies. Wanting to sell as a package. $5000 firm not wanting to part out.

The basement dwellers are gonna finance one helluva bank account for her

I was consideing a precision AR-15 build by G.A. Precision but the eight-month or longer build time is not acceptable to me. I'm seeking names of other precision builders with solid reputations and hopefully shorter wait times who can produce a rifle that shoots 1/2 inch or less MOA at 100 yards. I want a custom build, not turnkey or out-of-the box rifle. Appreciate any suggestions.

Plastixrevolution non mar lower vise block and upper vise block. Only used the lower one on once and upper never used.

Boretech AR10 Bore Guide 7.62/308. brand new in package

Boretech bolt action guide rod 30 cal

Several Boretech 30 caliber Nylon brushes.


$75 shipped for all of it.

PayPal FF, Venmo or Zelle

Leica Geovid 10×42 HD-B 2200 Ballistic Rangefinding Binoculars - $1200 Shipped​

Venmo or PP F&F

Great shape
Works great and glass is incredible.
Used for several seasons.

Vision Hybrid Chassis for REM 700 SA with MDT SCS Lite Buttstock. This chassis has never been shot and has only had a barreled action sat in it for about an hour. It has an upgraded ergo grip over the std grip they come with.

Decided to go in a different direction for NRL Hunter Light Open.

Paid $550 for the chassis, $220 for the butt stock, and $40 for the grip.

Price: $640 Shipped.

Looking to sell approx 630 pcs of Lapua 25x47 brass. Has been deprimed sized trimmed and cleaned.

This brass has been fired twice.

Looking to move all the brass shipped for 375$

Holler at me with questions/comments

The app is finally here and ready to download! Go take a look and let us know what you think Also, thanks to the beta team for testing the app and making sure everything was working, appreciate it!

Play Store

App Store

Latest model HOG Saddle® with some improvements from the original design. The HOG Saddle MOD7® is currently a standard issue item in the Marine Corps, U.S. Army, and other various Special Operations Units. Made in USA

Light use, only a few trips to the range ***SOLD*** $240 shipped and insured. Discrete Venmo, Zelle or PP F&F

Happy to jump on a video call (Facetime, Zoom, WhatsApp) with serious buyer. Shoot me a DM if you have any additional questions or need additional pics. No Trades, thanks for looking!

Looking for either company. For the dies I'll do the set or individual dies. Only interested on FL

Like new in great shape no action screws.
$200 shipped
.

Sauer 100 bolt removal from improper insertion.
I have installed my bolt 90 degrees counter-clockwise to the proper way - now it cannot be removed. Done this twice!
The problem -The groove normally at the left side where the bolt release is (where the bolt release engages this groove) is now located at the bottom 6 o'clock position. The trigger sear is now engaged into the groove and stops the bolt being removed. The trigger sear spring must be pushed down via some appropriate tool you can find to be pushed in from the rear at he bottom/underside/ 6 o'clock position of the bolt and push down the sear. The bolt firing pin must be cocked. This is an except from Sauer 100 manual saying the same thing. I thought I would share my dilemma. I am sure I am not the only person experiencing this as it is easily done by mistake
32100.02
Fault: Chamber is jammed
Possible cause
Remedy:
The chamber has been incorrectly inserted
and the chamber capturing groove engages
in the trigger sear. The chamber cannot turn
any longer.
Take a thin object (e.g. 1.5 mm Allen
key), insert it under the chamber in the
rectangular groove until the tool meets
some resistance. Gently press the tool
approximately 1 cm further in. This
pushes the trigger sear down. Turn the
chamber slightly to the right. Remove
the tool, turn the chamber to the right
until it snaps into the correct position
(image 17).

First post here.
But I do not even own a fire arm.

WTS a Boyd’s Rimfire Hunter stock for a Ruger 10/22. Color is ZOMBIE HUNTER LAMINATE.

The stock has never been used. It was bought for a build that never got competed and has been sitting the corner of my gun room.

Asking for $160 (Venmo) shipped.

Selling my labradar setup. Near perfect condition and still has plastic protector still on the screen. Not used much, and nothing wrong with it. Just decided to go a different direction for my setup. Instructions included for everything.

Includes:

• Labradar (full model, not lite model)
• Grey Ops Labradar ARCA Mount
• 3D printed picatinny aiming mount with look through aiming hole
• North East Texas Tactical picatinny/magnetic mount recoil trigger
• Microphone trigger (for airgun and bows)

$300 TYD. Accept most major payment apps (Paypal, zelle, cash app, venmo, etc.). Buyer pays any extra fee for non-free payment types on any platform.

Post here or PM me if you have any questions. Can provide additional pictures upon request.

I just bought a PRI Mk12 Mod 0, and it will need some glass. I'm not a huge clone whore, so I am not dead set on trying to hunt down the old Leupold, nor am I set on running a SFP 2.5-10 NF scope.

If you were going to put a more "modern" optic on a Mk12, what would it be?

I'm looking to spend between $1700 and $2200. I've been eyeballing the 2.5-20 NX8, based off of the size, weight, reticles and pricing. Another option on the table is a Razor HD Gen III 1-10 (different class of scope, but very good in my experience, and would fit the bill). An older Leupold Mk6, or a Mk 5 in the 3.6-18 variety would be acceptable too. I would like something that's relatively light, compact, reliable and FFP.

For sale

LH Defiance Tenacity (.308BF) & M24 contour .308 BBL with approximately 10k rounds on the barrel.

The smith for the work was Altus Shooting Solutions.

The rifle has alot rounds on it but still shoots 175gr Federal GMM in under a .5 MOA group.

Selling as I am looking to move to Impact actions.

Action and BBL only

Will trade for a LH impact action.

$1250

Selling my collection of SiCo muzzle attachment components. Most are slightly used (< 100 shots through them), and some have never been shot through or mounted on a rifle. I just decided to go another direction for my setup.

Prices below are for individual mounts. $400 $870 for everything together. Trying to not immediately split everything up if I can help it.

• ASR muzzle breaks - $65 each TYD
  • 5/8 - 24 .338 cal (lightly used)
  • 1/2 - 28 .30 cal (the most used, but still lightly used)
  • 1/2 - 28 5.56 (lightly used) - SOLD
• ASR anchor break .30 cal - $190 TYD (lightly used, < 20 shots) - SOLD
• TOMD break .30 cal - $80 TYD (lightly used, < 20 shots)
• 2 x ASR flash hider 1/2 - 28 .30 cal - $70 each TYD (never shot)
• ASR Blast Shield - $110 TYD (lightly used, < 50 shots) SOLD
• ASR Charlie mount - $130 TYD (lightly used, < 50 shots)

First person to publicly claim it all with an "I'll take it" takes precedence. I will handle one offs on a case by case basis via PM, and am open to discounts for multiple device purchases.

Kilo 3000 BDX. 8 months old, nothing wrong with it, just upgraded.
675.00

I have doing research and find a lot of significantly varying information. I know these are subjective to your desired neck tension but as a general guideline how do you go about choosing a mandrel and bushing size? I am currently using a mandrel three thousandths less than the bullet diameter and a bushing six thousandths less than the loaded neck diameter.

$75 tyd

Anybody gave this powder a whirl yet?

I picked up a pound of it and Win Staball HD today. Thought I might try them out in the Win Mag.

I don't have the Hodgdon '24 Annual Manual so I guess I'll try to extrapolate data for RS Grand from what Hodgdon has listed on their site.

Mike