Nosler and Berger
$50 each plus shipping

Selling a like new/ lightly used condition Leupold Mark 4 4.5-18 with PR2 mil reticle
Reptilia 34mm AUS mount 34mm ROF mount
Holosun 407C on top.

$1100 for Leupold MK4
$350 for Reptilia AUS 34mm mount w/rof plate
$200 for Holosun 407c
ISO for like new kestrel 5700 elite w/ AB

This Element is fully loaded and includes the following accessories:

Black XLR Element aluminum chassis with C6 buttstock
XLR Bag rider
XLR thumb rest
Ergo grip 1 vertical and 1 tactical grip
Element internal weight kit
C6 buttstock weight kit
XLR adjustable DBM
Short and tactical long mag latch
XLR long and short C6 buttstock LOP adapter
One 5 round 3.850 300 WM magazine (used for 7 PRC)

Everything in excellent condition. The smudges you see in some of the pictures is grease from the LOP adapter that I got on my hands when installing. This is perfect as new condition with zero blemishes.

$1,125 shipped
PPFF

WTS like new unused Short Action Customs (SAC) Alpha Dasher.

Die, 2x decapping pins with collet, lock ring, and .264 bushing as shown.

$260 TD.

Small powder such as CFE223 is a PITA in the V2 ( Hornady) dropped

Does the v3 dropper do a better job , not locking up, spilling out the side and etc?

Are these even available to purchase anymore?

LNIB. I took it in trade and was told it had one magt shot for function check. I've put about 4 mags through it, darn nice pistol but it just isnt my thing. Comes with 3 original Ruger mags, all the paperwork and box. They're $1000 at Cabella's, $890 on gunbroker, but you have to pay tax, shipping, "CC Fees and the FFL charge.

$850 $750. I'll be very picky about trades but feel free to offer. $35 shipping from my FFL to yours unless youre in Oklahoma.

I am going to be resizing fired brass for the first time, as I have only ever used virgin brass before.

Rifle: Tikka T3X 6.5 Creedmoor
Virgin brass at 1.910 with a seated CBTO of 2.19

I have always used a CBTO measurement as my final measurement to maintain consistency. After firing, I anneal and clean the brass. I use a mandrel for the necks and then trim the case to 1.910

My concern now is that the brass size will still be different to that of the virgin brass.

Questions:

1. My fired brass all exhibits different measurements using my Area 419 headspace Gauge. I suspect different brass expands and springs back at different rates. What would an acceptable tolerance be? If we uniformly resize less 0.002 then will this not impact the CBTO length that I use as my go to seating measurement?
   • I expect If dies and setup consistently bump all brass back the same amount (e.g., 0.002" less than fired measurement), the CBTO variation will be minimized. However, since brass length and case volume change with firing, some variations in CBTO may still occur.
2. How much does this affect the load over time if we resize less 0.002 every time? Should we limit resizing + annealign to say 8 times for max safety/accuracy?
   • I expect case wall thickness may still change over multiple firings. If neck tension varies, bullet release pressure will vary, which affects velocity and pressure. I hope the change over the lifetime of the brass should not extend beyond anything that should significantly affect accuracy, enough to warrant new load dev etc.
3. If I load the fired brass to the same CBTO, will the load react in the same way as with the virgin brass? Should I weigh fired vs. virgin brass to check for volume differences and scrap the outliers?
   • Fired brass may have different neck tension so I expect case volume will change leading to minor pressure and velocity changes as wall thickness changes over multiple firings.

The chassis seem about what you'd expect for a budget unit but wondering about the barrels. I expect its about like everything else, you get what you pay for, but its nice to dream of that elusive silver bullet.

Anyone have experience?

New with packaging Sig Kilo tripod Mount.

$SOLD
Shipped

3 700 ground recoil lugs
PTG M16 and Mini M16 extractor kits
PTG 700 ejector kit
All brand new
$100 shipped conus for everything

80 pcs Lapua 800gr moly coated solids $140
30pcs Lapua 750gr solids $55
20pcs Lost River Ballistics 750gr solids $35

Up for grabs is a *NEW UNUSED* Gen 2 Sphur Picatinny Scope rail. 20 MOA built in, has all original parts and never opened. SOLD

I've been making a couple revisions to my SPR and SPRecce, one of which is keeping some dope on the inside of the ocular covers again as a fall back option. In the past, I'd use some masking tape but this time I thought I'd make something "fancy". I know there are commercial options available but I didn't really like them so I took a little bit of column A and a little bit of column B to make something tailored to the two guns. Plus side is it also didn't cost me any money. I "laminated" them with clear packing tape and trimmed the tape so that it would catch on the inside of the cap to stay put. It's a bit janky but it works. I attached the template sheet in case anyone wants to use them, the larger one is 1.75" in diameter and the smaller one is 1.50" in diameter.

Hi, my name is Mark. I have been stalking for some time. Ready to become active. A friend and I are planning to do some prs matches this year. Will be posting my journey and undoubtedly asking many questions in the near future.

I really love the dimensions of the Gunrunner pack for hunting. I use the scabbard for a tripod and the top pocket for a game caller. The narrowness makes carrying a slung rifle and moving through thick bush great.

However I find the top loading only with drawstring and flap that attaches to the bottom flap very slow to open and close. You have to dig through or dump out the main compartment to get to anything at the bottom. Also I never use the butt flap. I find myself using the molle for extra pouches not to add more space but just to make things accessible.

I am considering an X1 Euro but don't really need the extra volume I just really like the multiple zip open compartments.

Are there any other comparable sized packs that easily store a tripod but are more compartmentalized with zippered pockets?

Hey 6Dasher shooters

I’m looking at jumping into the 6mm world and thinking 6Dasher could be my next calibre.

Asking the 6 dasher cohort if they have good experience feeding 6Dasher from .308 AICS pattern mags or whether it’s best to go with 6Dasher specific magazine? I’m involved with PRS style comps so a magazine reliability is important.

Thanks in advance

Hi- long time lurker, first time joiner. Looking forward to learning from y’all.

WTT/WTS:

Hornady: TAP Precision® .300 Winchester Magnum, 178gr ELD® Match​

4 2 x 200 round cases (same lot) - $350 per case Sold!
1 x 180 round partial case (same lot) - $300 Sold!


Trades: Looking for 6 ARC ammo, 6 creed ammo, Bartlein 6mm blanks (CF, MODBB), Proof CF 6mm Blanks, etc

Got out before the rain and ice . Been jonesing for a long scenic ride .

SOLD….250$…. Will send pic of code for you to use after payment

I've recently gone down a rabbit hole of a project I'm throwing money at. Selling the last (3) bricks of Lapua Center X for $500.00 shipped and insured.

Not interested in trades.

Payment via PayPal friends and family with no note.

Please do not ask me to ship where prohibited and know your local laws/regulations.

The ammo purge of stuff I'm no longer using continues:

I've got a case of Federal Gold Metal Match 260 Remington 142 SMK, $330 shipped

Trades: 6ARC or 6CM Ammo, 6mm projectiles, whatever...

I have two like-new Harris bipods that I've owned for several years and never used. They've been attached to rifles in my safe, but never been outside of my house. No marks, dents, rust, etc. I've converted my rifles from sling-stud to Picatinny attachment and won't be able to use these.

1) SOLD Harris bipod model 1A2-L (pictured on the left). Extends 9"-13", smooth legs, non-swiveling, sling-stud attachment. Made in USA. $70 shipped.

2) SOLD Harris bipod model S-BR. Extends 6"-9", smooth legs, swivels (tilts) to compensate for uneven terrain, solid base, sling-stud attachment. Made in USA. $95 shipped.

Payment via PayPal FF or USPS MO. PM me if interested.

ISO Spuhr 4802 or 4602

Hey guys, I'm converting my mid-length gas system 16-in AR to run an 18-in barrel with a rifle length gas system. I'm no expert at this so I want to run this by you guys to make sure I'm on the right track.

I was doing a little reading last night and it sounds like I may be able to get away with my original buffer and spring and just tune it with a adjustable gas block? I was going to run the riflespeed adjustable gas block. Then if there's any trouble I could always mess with the buffer weights. Does it sound right?