Adjustable mag for AICS 22lr Rimfire.

$120 shipped. Zelle or PayPal F&F.

Mix of holsters im looking to get rid of, some new, some used. All in good shape. Need specific pictures let me know.
1 G19 OWB $25
1 Tier1
P365 x macro Comp tlr7a IWB $30
1 Bravo Concealment p365 IWB $20
1 Black Point Mini Wing p365 IWB $35
1 Bravo Concealment P365 OWB $20
1 p226 OWB paddle $15
1 crossbreed IWB xdm $15
1 double mag holster $10

112 rounds of 243 Winchester brass. 88 Rounds of Winchester, 20 rounds Remington and 4 random rounds of Federal. I shot these my self a while back, never got around to reloading for 243/sold the gun, brass is taking up space. 35+shipping

3- APA Gen 3 Little Bastard. 5/8-24.

1- Black 6mm Sold

1- Stainless 6mm Sold

1- Stainless 6.5mm Sold

$90 each to me shipped to you.

The rifle is a 22” Bartlein 6.5cm barrel chambered by bugholes with a terminus Zeus qc. About 160 rounds on the barrel so far, mostly not suppressed.

Same issue with two different loads
- 143gr eldx with 40gr h4350 with br2 and COAL of 2.864”
- 140gr eldm with 39gr h4350 with br2 and COAL of 2.853

Both in virgin Lapua brass prepped by trimming slightly to 1.906-1.908, 21st century expander mandrel at .262, and champher/debur.

Rifle initially shot great, multiple groups around .2 moa. I noticed heavy bolt lift intermittently, primarily shooting the 39.0 h4350 and eldm combo listed above, but didn’t know what to make of it and it kept shooting well. I scoped it and noticed what I thought was carbon ring initially, cleaned it out, and the rifle kept shooting well. Only had about 30 rounds through it after a good cleaning and scope to make sure the ring was gone, when I had very heavy lift shooting 14 rounds of the 40.0gr eldx load above, which seemed to be getting worse the longer I shot.

I scoped it again after I got home and included pictures of that in this post. It looks like a lot of carbon ring to me, which I don’t understand for only about 30 rounds of 6.5cm.

My chronograph died and I’m waiting on a Garmin to arrive, but initially had Chronographed the eldm load at 2520fps.

I tried decreasing my powder charge, and I am still seeing the same pressure signs of heavy bolt lift and ejector marks.

Am I trimming my brass too short and seating the bullets too long, resulting in premature issues with carbon ring? It doesn’t feel like I’m jamming the bullet into the lands when I close the bolt. Can’t figure out what’s going on, but I thought I was seating 20 and 40 thousandths off the lands based on my initial measurements. I’m assuming the problem is me and something I’m doing, but since I’m using brand new brass and not doing much to it, I don’t know what could be going on. Appreciate the help.

Selling a Flatline Ops Recon scope bubble level for 34mm scope tubes. No marks or issues with it. SOLD. Can take several forms of payment to include Venmo, PP FF or Zelle. Pictures attached

5 20 round mags for sale, 4 are IMI and one is FN. All in excellent condition, maybe new-unused. I have some FDE cerakoted Austrian mags I might let go if interested in a few. Some of these mags were new and came in wrappers but I took 'em out.

4 30 round "curved" mags for sale. These are the cool curved ones in all DSA's pictures that they don't make or sell anymore. They're pretty rare and the last I saw for sale were $100ea. a few years ago for some used ones during good times. These are UNUSED.

$30ea for 20rd. mags plus $5 shipping whether you get one or four. $140 shipped if you get all five.

$120ea for 30rd. curved mags plus $5 shipping whether you get one or three. $450 shipped if you get all four.

$550 shipped for all the mags.

Also have FAL parts, US trigger parts, other small parts, lower, carrier and PRS buttstock and a scope mount --all for $320 shipped. A barreled upper, bolt and a few small parts and you have a whole new rifle.

$650 shipped takes it all for now.

**SOLD** Brand new Nightforce ultralight 6-screw ring set. 34mm. 1.125“ height. With bubble level top half. Not looking for trades.

$200 shipped

I believe it’s two lot numbers: 300 of one and 200 of the other. Selling it altogether and don’t really want to split it but would offer the following:

$525 shipped for it all.
$325 shipped for the 300
$225 shipped for the 200.

No shipping to Alaska or Hawaii. Know your state laws before purchasing. $500 FTF if you’re in MI near GR.

Lothar Walther .30 cal, 10 twist for 26" length (can go shorter). Medium palma contour

Bought it a year ago and never got around to the project.

$360 shipped.

Krieger M24 Modacam Vudoo barrel

1:16 Twist, just shy of 25” finished length

Removed from Vudoo 360 action
EC Tuner direct threaded (included)

$650 +
PPFF, Venmo Gift, Zelle

Ya know.....he's one of those guys. He is an almost sponsored bass fisherman but he has no boat. He guides duck hunts but doesn't really make any money at it and no one wants to go with him.

So shit head announces on a local radio show that he has a great bird dog that needs a new home. I dont want another dog but nothing thrives in this guys orbit so I make the call. I go over to look at the dog and it looks pretty timid. I ask him why he is letting go of such a great dog and he says its getting after his chickens. I know the area enough to know he doesnt have any chickens. Shit head.

I kneel down to call the dog over and he creeps forward until he gets past this guy and then bolts over. As I am petting him I realize under all that fur is nothin' but ribs and back bone. Shit head.

Great. Now I have another dog.

After throwing a bunch of groceries at the poor skinny guy, and letting him sort of settle in, he seems to be kind of coming into his own. But man, that dog has a ton of energy. Sweet, kind and kinda goofy. I have an older well mannered black lab and the Golden has really mothered up to him so he is not all alone when we are out.

I think he is just about 1 so what can I expect from here?

***I paid for my optic and got a free barrel, that’s the extent of my relationship with Outlier***


I finally got my Outlier barrel, below is my personal experience, yours may vary.



Let me start by saying it wasn’t fast, it wasn’t easy but when all the dust settled I am very impressed with the barrel and even more impressed with the customer service.

Like many who have an outlier barrel I got mine free99 with the purchase of an optic. The choices were limited so I went with everybody’s favorite cartridge to hate, the 6.5CM and at 1.2” straight taper I went 16”

My initial barrel didn’t even arrive, rather I got an email letting me know it didn’t pass QC. No problem, I didn’t mind the wait because they shipped my optic fast and it’s a free barrel.

A few weeks later I received my barrel. I had read some good reviews, some not so good reviews but whatever, I was excited.

The barrel didn’t disappoint in the “looks good” department. While others may not like the single pass texture on the barrel I actually like it. I didn’t spring for the nitride finish nor the flutes. I just wanted the free99 barrel.

Eager to get the rifle ready for its first range day I installed it on a Defiance action, or I attempted to. Unfortunately there were lessons to be learned. I had ordered the R700 threads and just inferred that it would fit. Why wouldn’t it? My PVA barrel fit so this should too……well it didn’t fit. Try as I might I couldn’t get it to headspace. So I sent an email to Outlier and I waited…and waited…and waited a little more. A few days passed and I figured I would check my email. Nothing. Well guess what, they never did email. One day I decided to use my phone like an actual phone and I noticed I had missed a call several days ago, I even had a VM…strange…who leaves a VM? Turns out someone from Outlier had taken the time to call and help me sort out my troubles.

I’ve had some pretty good customer service experiences in the pew pew arena, Outlier was second to none.

I called the missed number and immediately got a person, no phone tree, no “press 1 for English” just a real person. Turns out the guy called from his personal number and said to call that number back.

After some questioning it seemed we had the problem sorted out. The Defiance action has different tolerances and the decision was made the barrel would need some finesse. Outlier sent me a pre paid postage and off it went. Just a few days later I was texting Outlier (the personal cell) and everything had been sorted out and the barrel was on the way home.

The barrel arrived quickly, it maybe took 4 days from the time it left me until it returned.

The machine work was great, I was able to headspace the barrel and I was ready to roll!

This barrel is a chonk for sure. If you think m24 is a truck axle, you don’t know truck axles. This barrel, she’s a proper truck axle. The Bravo chassis almost couldn’t handle her….almost. The barrel nut was close but daylight managed to squeeze through.




Now this particular setup isn’t new. It’s been wearing a PVA pre fit and the consensus is clear, Josh builds a fine barrel and mine is no exception. I routinely shoot that barrel 0.25” or better (5 shot groups) so the platform is proven. If the Outlier barrel can’t shoot, it’s the barrel maybe the ammo but it’s not the other parts.

So today was the day, the Outlier shakedown.


Like all free99 barrels it got only the finest break in, just like all my other rifles….I just shot the phucker. 12 rounds down the pipe, not too fast, definitely not slow. Zero cleaning. Zero fuss. Don’t like my methods…..good, cause I don’t like yours.

All warmed up and ready it was time to shoot for groups. I didn’t get a perfect zero but I wasn’t worried and I was expecting some POI shift as I wanted to test all my 6.5 factory ammo.



All groups were 5 shots @ 100yds



I was testing the following:


130 Berger: 0.522”

135 Berger: 0.954”

140 Berger: 0.782”

156 Berger: 1.2-1.5”

120 A-Max: 1.290”

140 A-Max: 0.315”

140 ELD: 0.883”

130 Prime: 0.551”



Here are my results:








Try as I might I could not get the 156 to shoot. Maybe it’s not enough twist?






the group to the far right isn’t my group. A guy at the range wanted to try and all he did was waste my ammo




My final thoughts:

Outlier claims sub MOA and I would consider all this ammo to well accepted as match Ammo. With the exception of Berger 156 and A-Max 120 Outlier held the standard. I’m not sure why it didn’t shoot the 120 melty boys or the 156 Boogers tighter.

I’m very happy with my barrel and the options I selected. If it arrived and fit perfectly from the start I would have written my little review to help others and I would have been happy.

However it didn’t fit, and I’m kinda glad it didn’t. I had the opportunity to really experience what Outlier was really about, and I’ll tell you right now they are about The Golden Rule. From the moment they knew I was having an issue they did everything to help, including a video call to ensure they understood the problem. They didn’t tell me to pound sand, they didn’t create excuses, they didn’t lecture me how a Defiance isn’t a R700. They just asked questions and took care of me…..on a FREE99 barrel. To say I was impressed is an understatement, & to top it off, the barrel shoots as promised.



I wanted to do something to express my satisfaction and that’s why I’m doing this write up.

Hope it helps or just pisses you off.

*special thanks to @Glassaholic for what I consider to be the BEST load development targets. https://www.snipershide.com/shooting/threads/load-development-targets-feedback-wanted.6876258/

Buy More Ammo!

Kestrel 5700 Ballistics Weather Meter with LiNK. Like new SOLD

Zelle or PP F&F. US50 only. Cross posted.

As many of you know, Joe (@wigwamitus) and myself strive to be a source of trust and knowledge for thermal and night vision consumers. After all, we are end-users in the same way that many of you are - same common goals.

Our roots remain unchanged. We freely offer our insights of lessons learned, what works and what doesn't, especially when it comes to your hard earned dollars. Preference is always to have a conversation before you make a purchase, to ensure it's the right tool for the job based on requirements.

As a result of growing demand, SOK recently onboarded a new team member - Tyler (@tam4511). We're excited for the knowledge and expertise he brings to the table.

A big thanks to the Hide community for making this possible!

Preston

Hello everyone, name's Erik. I shoot NRL22 and PRS rimfire in the Chicagoland area (Great Lakes region for PRS). I've been shooting in the airgun division, and finally got a rimfire this year. Dual threat and all

I've been reading the forum since I started this hobby, and always found the content quite informative. Lots of the guys I shoot with are members here and have recommended users and vendors for gear and advice. I figured it was time I jumped in.

Looking forward to getting to know the community!

Time to start annealing my large collection of brass.
Vertical standing auto feed is the course I’ve decided on. Between these 3, I could really use some input from you guys that have used one or all. They all 3 seem to be very similar, so it comes down to ease of use and precision.

Burstfire g2
Ugly
Annealeez

Login to view embedded media
Rex Silentium is known for being a great value in the suppressor world; I have and enjoy a .308 MG7K (my first can, actually). They recently came out with a low backpressure line, and I just got one thanks to @romad99. These are just my first impressions, so stand by for the full review. I’m definitely optimistic on this one, because if it truly is “ultra low backpressure”, then it will definitely be the cheapest on the market, especially with the BF sale they have every year.

Criterion 6mm Dasher prefit
Excellent condition...barrel is super accurate!!!
26 inch bull barrel
7.5 twist
Threaded 5/8x24
Between 450 -500 rds.
Fits savage (small shank), origin, aero precision solus actions

Comes with APA fat bastard muzzle brake

$325 SHIPPED....
PayPal F&F

New
$old shipped

Took the SRO off and can’t find the plate.

Comes with 2 17rd mags and the TTI bag.

$2900 Shipped from my FFL to yours.

Zelle or PayPal F&F only.

Looking for a set of black Geissele flip up BUIS LMK if you want to sell a pair pls thx.

This was a one off die I got from being in the Area 419 club. What sets these apart is their crazy hardness and spring ejection.

Never used, not many of these were made, I don’t believe any made it into the market
Sold shipped