300 of them.
150 shipped. I don’t know lot I know it’s from 2022.

Can someone please help me in explaining the benefits and strengths of 375swissP?

I currently have a DTSRS and an AXSR. Either one would be suitable hosts as both already have 300NM barrels.

Would the Swiss be better than 37XC?

I'd like to 375 as TBAC now has suppressors with this bore, and the 338 class bullets just don't offer enough gain over 300 class right now.

Thanks

Anyone have one that I could borrow, rent or possibly buy?

I have most of all the parts I need to build an M40 clone:

6 digit 1967 donor rifle
beever165 stock
Bartlein barrel (on order)
Redfield 1st gen fine reticle scope

Just missing the Wichita sling loops

I have 2 scope mounts to choose from: Redfield Jr and Badger Ordnance reproduction M40
Which scope mount should I use?

Redfield Jr with the correct finish but has the rounded corners

Badger Ordnance reproduction with a parkerized finish

Or send out the Badger Ordnance to have it blued

Anyone have instructions or info on this scope? Scope is 20-25+ years old. Photo is looking at the elevation adjustment, is the small screw at the edge of the center white a set screw to lock/unlock adjustment or a "fine" adjustment? Is the white tick mark in the black a "zero" point?
Any info is appreciated.

Looking to buy a nicer scope mount:
30MM
1.5"
0 MOA
Ideally QD
No offset/cantilevered
ADM/Spuhr/Badger/other???
Black

Hi all,

I'm looking for the right spuhr mount for a SAKO 22 TRG A1. Is anyone running this combination ? So yes, what is the ideal mount ?

Thx !

B.

I have a Surgeon Scalpel 300 Win Mag built on one of the Prague, Ok, long actions with AI-AX chassis with Jewel Trigger. It had about 20 rounds down it when it first came in from EuroOptic, but it has been sitting since.

I'm asking $2150, but I'm unsure of the current price, so I'm open to offers.

Shipped to your FFL, I can meet locally near Ft Benning, GA.

Have a couple shotguns looking to sell or trade. Or swap the 32" a400 bbl for a 26". Or take a 1301.

Beretta 687 EL. 12ga 28" tubes, pro port porting, gracie adjustable plate, case color receiver, nice shape and tight, 5 beretta victory chokes, 2 broiler skeet, and 3 flush mount. Factory Case and paper, nice wood. 2250.00

Beretta a400 xcel sporting, 12ga, 32" bbl, with kickoff system, 2 Beretta chokes, good shape but is used and shows signs. 1500.00

SOLD Beretta A391 urika, 20ga , 2003 NRA gun, good shape, case, papers and all chokes and wrench etc. Has a Crack in the forend that has been repaired . Nice light shooting 20ga. SOLD

March Scopes 5-40x56mm Tactical Turret, FFP Illuminated FMA-2 Reticle

Like new condition.

$1800

Magnetto Speed V3 $149 shipped OBO

I have this beautiful Beretta 687 I'd like to move.
It's a Joel Etchen signature with adjustable cheek, EELL wood, 30" barrels and seven chokes.
I have a picture of the only mark I can find on the gun.
Asking $3700 obo

CBTO reloaded by me was always gauged on getting the tip of the bullet as close to the lands as possible without touching to reduce wobble. The measurement was found by taking 10 rounds of recently fired brass, loading to different CBTO lengths and loading, until a length that was the longest stayed the same length after ejection. Any that were too long would stick a bit and, contrary to thinking it would be shoved down shorter, it would come out longer due to the slight stick from being wedged against the lands.The downside has always been the cartridge will be too long for the magazine. This has been a big pain when shooting. I have run tests and found the longer cartridge to be a bit more accurate, but perhaps I was a bit biased and subconsciously skewed the results. Anybody have any comments or suggestions.

Used, in great shape, sans a scratch on the turret cap lock slot and a spot on the throw lever. I’m original owner. H59 reticle. $800 shipped. No Trades.

Hello,

Selling my 16.5” Tikka T3 6.5 PRC AW2, CarbonSix varmint 5/8x24 barrel, about 170 rounds down the tube.
Sits in a UPR stock, CTR bottom metal and mag with adjusted feed lips.
Great little hunting/truck/stand rife with 24” 260/Creed performance
20 moa mount, Mountain Tactical bolt knob
Sage green cerakotoe, scope and rings available for purchase for a light weight rig.
Hunted with 124gr Hammer Hunter with great results and accuracy.
Consolidating calibers and making room for new toys.
$1,450 $1,250 shipped to FFL, discrete ppfnf

* When taking pictures I've noticed a crack in the stock by rear action screw so I'm dropping the price

Thanks for looking

SOLD shipped to you. Was going to pick up an atacr but changing directions…. Saves a whole bunch of cash for a new atacr with Nightforce

This is a Harris 6-9 bipod with RRS arca adapter. Ready to slap on rifle and go shooting. Price includes shipping to lower 48. Randy

Both are to be used with the ARD.

These will fit the new 735P but will be a little loose at the rear.

$35 shipped each

Multicam Black and Coyote

Only Coyote color left!

PPFF, Venmo, Zelle

Hi all. I am just getting started in my PRS journey and starting to acquire what I need for reloading. I have an MPA Matrix Pro-II 6.5 CM. Do any of you use Starline brass? I am trying to get a sense of its quality vs Alpha. Starline is about half the price of Alpha from what I can tell. For those who have used it or currently use it I am also curious as to its durability and how many reloads I can expect to get out of it vs the Alpha.

Thanks. I appreciate it.

Never used GrayOps AW 6gt magazine doesn't work for my rifle unfortunately

Does have some scuffs from inserting into the rifle

$130 STYD Paypal,Venmo

Thank you

What Im looking at:

BCM 14.5" (or 16") middy or RRA elite tactical A4 middy
BCM gunfighter handle
Troy TRX battle rail (dont want rails where they arent needed)
possibly a noveske switchback for shooting with a can

Questions
Can a tube type handguard be used with a standard front site
BCM or RRA
Noveske's site says something about gas blocks with screws are now as good as pins, any info?


The other option i have is an Adams Arms upper Mid tactical elite piston upper, anyone have any experience with these?

Brand new in the box stripped lower. asking $325

Title says it all. Looking for an sci 20. Lemme know what ya got

Up for sale is a new in package JP Enhanced bolt for 6.5 Grendel and 6 ARC AR-15 BCG's. $140 shipped via discreet PP FF/Gift.