New, with box. Bought for a small frame gas gun build and it’s simply too bulky.

$450 Shipped PayPal FF

Curtis Custom Axiom action, Gre-Tan chambered 6.5 CM, 22" Oregon Mtn Carbon Fiber Barrel with 3 port self timed brake 5/8x24. Trigger Tech Primary, DBM bottom metal, McMillan Game Warden bedded stock.

$3500 buys it.

Will trade towards a IRAYRH25V2

Selling a new, sealed in the box mark 4 spotter with tremor 4 reticle- black in color.
$2000 shipped Tyd No trades. PayPal gift or Zelle.

shckma

For sale is an excellent condition NX8 4-32x50 FFP in Mil C reticle. Comes with 1.00" height (mediums) NF ultralight rings.

Used sparingly
Comes with box, manual, tool, lens cloth etc…
Comes with NF ultralight rings (A101)
I'm the original owner

Asking $1950 shipped

For sale Area 419 brake
black nitride
Excellent condition

6.5 caliber hellfire match 5/8-24
30 caliber sidewinder 5/8-24 also comes with additional adapter (I believe it’s 1/2”)

Asking $155 each shipped

Another purge here. No trades needed. Using these funds to upgrade some of my optics. Payment by PayPal. Either form is ok. But, if using g&s the fees are at buyers expense.

Bushnell forge 2-16. Has the g4i ultra reticle. 34mm tube,locking turrets,zero stop,illuminated center dot. Comes with box and sunshade. 225.00 SOLD!

Krg xray. Sako green,Remington 700 short action and clones. Comes as you see it in pics. Also includes a swivel stud and full length arca rail. 325.00 SOLD!

Aero precision ar-15 upper. 16” 1/7 twist ballistic advantage barrel. 13” faxon m-lock guard rail. Comes as pictured. No bcg or ch. 170.00

Hey all,

Selling my ZP5 3-15. It's mostly brand new. I took it out once to a friend's ranch to do a bit of LR shooting and then it's been with me hunting a couple times.

I rarely use the rifle this optic is on and the few times I've used it, I've realized more and more I do not really care much for this reticle. I also have another FN SPR that is needing glass so I've decided that selling this could go towards replacing it with something that has a reticle that works for me plus have a bit leftover to put towards glassing my other SPR. There are 3 very small blemishes that I have pointed out.

1. The time I took it out LR shooting I didn't realize that my rifle was ejecting the spent brass onto the windage turret and erector housing. I've done my best to photograph the slight damage it has. It's only cosmetic and does not interfere with its functionality.

2. There is also a very small ding to the scope bell. It took a bit of the finish off but I cannot tell that it is dented in. It appears to only be surface.

3. It also looks like the the objective lens has a very small scratch that runs horizontally. I just noticed that right now while photographing it. I do not think I have ever noticed it before while looking through it.

I am asking $1,850.00 plus shipping & insurance. I prefer cashier's check, money order, USPS certified check and will ship once funds have cleared and been collected into my account after depositing said check.

I still have factory box and the things that came with it.






**edit to add**

Due to high presence of scammers, I will not message you. If you want this item, you can post here and then YOU MESSAGE ME to avoid a scammer making a fake account that mimics mine and messages you pretending to be me.

Bought this scope in October for a hunting rifle. Only took to the range one time on my 223 and decided that i cannot get used to MOA. This has the TZL3 turret with TMOA reticle. CDS dial has not been redeemed yet. Excellent new condition with box and all paperwork. Not a mark on this at all

Will sell for $1625 delivered or $1750 with NF UL rings and level cap. Really looking to trade for a ff mil optic in same price range or above. MINOX ZP5 MR4, zeiss lrp, leupold mk5, etc.

LE Wilson Micrometer Top Bullet Seater and Neck Die 6mm PPC
Great Condition!
Neck Die comes with .2575 Bushing
$150 shipped for both

Any advice on removing 8.6 Blk brass from a Seekins SP10 and Mos-Tek barrel?

I was shooting suppressed 300 gr and the shot sounded louder than the others. Doubtful a double charge of A1680 but anything is possible I suppose.

The bolt is about 1/8” or so open (see pic) but actually ripped off one latch of an ambidextrous Geiselle Super Charging Handle the bolt is so stuck. The latch is open though on the CH so that’s not preventing it from opening.
I used spray lube and a solid brass rod with a lot of force and still not budging.
Considered removing the barrel but not sure how that would be affected by the bolt extractor holding the stuck brass.
Thanks.

Got lucky and it’s time to order another thunderbeast. I currently have an ultra 7, and in jail I have a magnus CB.

I just shot my first match suppressed with the ultra 7 and am giving up on brakes. Sick of the noise and concussion. Have a few questions on options specifically looking for input from competition shooters.

-CB or SR? Iv been passing around the ultra 7 quite a bit, I havnt had any problems with the CB but do tighten it regularly if needed, when it gets hot and cools quick. I also notice on higher round counts I really fill up the threads with carbon, just more cleaning but the SR mount has some appeal in that regard. Is the SR mount worth not having to worry about your can loosening during day a prs match?

-I’m currently thinking of getting another ultra 7, with a 6.5 baffle stack or going with a magnus SR to dedicate to my heavier competition guns that see more round count.

Passing around the ultra 7 is getting old, especially swapping rifles that have significantly different muzzle pressure. Every time I shoot it on my shorties it seems to make a lot of big carbon chunks, that sometimes end up in the chamber. I’ll have some redundancy with the magnus cb and ultra 7 if something were to happen, but having another ultra 7 to pass around the hunting guns it rides on would also be nice.

-Recoil on a heavy comp rifle. Do you notice a difference between the magnus and ultra 7 on a heavy comp gun, mostly 6 and 6.5mm flavor? Is the impulse different enough to warrant the price for another magnus?

Thanks.

SOLD

Function as new, light dust from range use. Has one very small blemish on the right ocular lens (see pics). It’s very small and not visible when in use. No other issues that I could find.
Comes with RRS cinch.

475 shipped.
SOLD

View attachment IMG_4778.jpeg

View attachment IMG_4776.jpeg
View attachment IMG_4777.jpeg

Looking for UHP in good condition. Please PM with details.

Anyone here into antique fly rods?

Ive got a rod here that Ive been trying to find info on....I can find info on other sized rods but not exactly what I have...here is the info thats on the tag:

-South Bend Bait Co. (Lots of info on these guys)
-Bamboo (lots of these)
-3 piece (most I found were 4 piece)
-9' (only found 8' & 8.5')
-Comes with an aluminum storage tube (none found with this)
-Aluminum reel
-Cork handle & aluminum back 1/3 where reel goes

The label on the tube reads:

-South Bend Bait Co.
-Split Bamboo Fly Rod
-Fishandfeelfit
-Rod No. 53
-Length 9 FT.


Any ideas on value guys? I can post pics if need be...let me know.

New guy from North/Central Texas.
Gun junkie for a long time. Just new here.

Vortex Strike Eagle 3-18x44 MOA

$625 for SE (still have the box)
MOUNT NOT INCLUDED.

Was on a 6 Arc that didn’t get used much.

$550 shipped. Used this for a couple coyote outings, still in excellent shape. I did notch the rear of the handguard for my origin rail and cut the length down to fit my 16.5” barrel. Has action screws, no grip. Rifle that was in it was Zermatt Origin with 16.5” proof barrel.

We have a limited stock of Seekins Precision PH3 available in 300 WM and 300 PRC. Make sure to get yours while they last!

As well as many having had these issues for awhile, some never made it this far though,... Always trust your gov & the medical industrial complex, as they have a stake in the games they force on you,...

https://slaynews.com/news/heart-rhy...g-physiological-mutations-among-covid-vaxxed/

Login to view embedded media
Turns out qualified immunity does not cover torture and malice.

Fractured skull , broken teeth broken eye socket broken jaw - injuries all sustained while handcuffed .

What’s for sale?​

An Area 419 Zero press with hybrid 8 station turret (4x 1-1/4”, 4x 7:8”). Pulled this out of the box, dry fit the mounting plate, played with press a bit, then put it back in the box and haven’t used it since, it’s still dripping with the original oil. I won’t have time to reload moving forward. Available are some accessories at additional cost if desired: 6GT M-series die, bullet seating plate (I’ll just throw this one in), 4x 7/8” die lock rings with wrench, Zero competition shell holder set, Zero storage tray, bullet tray/bin, Big Dog fab mount with all hardware.

What’s it cost?​

$1050 for the press. This is a large, heavy box - $50 ground shipping anywhere inside the continental U.S. and insurance is on my dime. My preferred payments are fee-less electronic methods like Zelle, but I’ll take snail mail etc. as well. Available by phone and text to chat/show proof of life.
Prices for accessories purchased with press:

1. 6GT die $350
2. Storage and bullet trays for $100
3. Die lock rings $50
4. Zero shell holders $150
5. Big Dog Mount must ship separately please inquire if interested.

Accessories priced by them themselves, add $5 for shipping except Big Dog:

1. 6GT die $400
2. Storage and bullet trays for $115
3. Die lock rings $60
4. Zero shell holders $175
5. Big Dog Mount - $140 plus shipping.

Looking to trade my Nf 1-8 moa for another 1-8 with capped turrets can be moa or mil

$150 shipped