For Sale: Weatherby Mark V Accumark 28” .338-378 – Excellent Condition!

Up for sale is my Weatherby Mark V Accumark chambered in 338-378, featuring the desirable 28-inch stainless steel barrel with factory Accubrake and hand-laid composite stock. (Scope not included.)

Specs & Features:
• 28" stainless fluted barrel (threaded, factory-installed Accubrake)
• Hand-laid Monte Carlo fiberglass stock, black with grey spiderweb finish
• Graphite Black Cerakote metalwork
• Sub-MOA guarantee from Weatherby
• Rifle only
• Fired 10 times, meticulously maintained – have a few boxes to go with sale


Condition:
Excellent – only minor handling marks. Always cleaned after range sessions. No issues at all. (Scope not included. Can discuss selling separately.)

Price:
$1850 (cash or USPS Money Order)

Location:
South Nashville,TN -- FTF/Local or Will ship to FFL

Why I'm selling:
Never went out west for that dream elk hunt. Now thinning the herd.

Terms:
• Buyer pays shipping to FFL if needed
• No trades, please
• Must comply with all federal and local laws

FOR SALE: Remington 700 SPS Tactical .308 Win – 20" Barrel (Model 84203)


Price: $750 (or best reasonable offer)

Location: South Nashville, TN

Transfer: FTF with ID or by FFL (buyer pays transfer fee, if local laws apply)

Description:

I'm selling my Remington 700 SPS Tactical chambered in .308 Winchester (model 84203). This rifle features a 20" heavy barrel and a Hogue overmolded stock, making it an excellent choice for precision shooting or hunting. The X-Mark Pro adjustable trigger offers a crisp, clean pull, and the rifle is well-known for its accuracy and reliability.

• Caliber: .308 Winchester
• Barrel: 20" Heavy Profile
• Stock: Hogue Overmolded
• Trigger: X-Mark Pro Adjustable
• Action: Bolt-action
• Capacity: 4+1 rounds
• Condition: New – still in box never fired
• Extras: Original box/manual

Terms:
• No trades, please.
• Buyer pays transfer fee (if applicable).
• Will ship from FFL to FFL at buyer’s expense (within legal states).
• Must be 18 or older, ID required

Contact:

PM for questions or to arrange a viewing. Serious inquiries only, please.
Thanks for looking!

MDT AICS 308 / 6.5 Creedmoor metal magazines with binder plate

2ea 12-Rounders; 1ea 10-Rounder; 1ea 5-Rounder (not pictured, but in similar condition) - $220 shipped

Needing some money for a divorce unfortunately and my 6GT is up for sale. Approximately 170 rounds down the barrel for break in and reloading testing.

- Aero Solus action
- MDT XRS with Arca forend
- Criterion 26" barrel
- TT diamond trigger
- atlas bt10 bipod
- 2x 12rd MDT mags
- 34mm rings (can include a Vortex Venon 5-25 mil or Athlon Midas Tac 6-30 mil as a deal)
- also have Redding bushing dies and brass about 220 pieces

Would love to see as close to $2200 as possible I think. Need it gone sooner than later so negotiable. Price is to me, however you'd like to get that done. Will split shipping so it's not all on you.

Login to view embedded media
Stuff’s just getting better and better, this isn’t even top shelf.

Governments will get toppled by this kind of stuff in the near future…

If you were wanting to test a caliber, have a practice barrel, fire form brass or have a hunting rifle for you/the kids-- I have tons of barrels (roughly 50) of varying calibers. All have muzzle threads.
6.5 Creed (26"), 6GT, 6BRA (28"), 6 Dasher (28"), 25x47 (26"). Most of these are cerakoted black. Most are Bartlein, but some of the newer ones are CRB. No other barrel brands. The countours are a mix of m24, mtu, and CRB comp. All the threads are perfect and all are chambered by Stuteville precision for an Impact.

These were my comp barrels (most/all of those will have 1 &/or 2 day match wins on them). There are a couple outliers that will have close to over 3k rounds on them. There will also be a couple that have less than 100 rounds on them. I would be lying if I said I kept notes on all of them and as such I won't be able to tell you which ones have how many. I'm not a magician with a borescope so while I'm sure someone could tell which is which I am not going to take the time to scrub each one to bare metal to determine the amount of fire cracking etc to estimate a round count. I don't run anything hot (creedmoors in the low 2600s, bras at 2800 etc).

None of these were taken off because accuracy degraded-- at a certain point it is simply safer to put on a new barrel than risk it at a match. Some of these (the really low round count ones) were projects or place holders. They weren't taken off because of a lack of accuracy, but a lack of time.

Anyway, if you're interested shoot me a message and I can get you pics of what you're interested in. To make things simple-- $200/ea shipped to the lower 48. Again, I want to be clear that these are all USED barrels with varying round counts.

Have a good day!

Nightforce NX8 with Geissele 1.54” Mount with one hundred concepts scope caps. Overall in good shape, see pics. $1,500 shipped. PayPal F&F or Apple Pay

Note: I noticed in the last pic that it looks like there's a spot on the glass, it is just dust, and I can send more pictures of the glass if wanted.

Open to trades

Wanted to find a spot to shoot 1K at the range just a couple miles from my house. Typically can only get out to 500. I played around with onx maps and line distance and came up with a spot that would allow 1040 or so. Time to load the 4Runner up with the gear and head down the road. I got to the point where I would be shooting from and got the Swaro 1500 RF out. The guys already had a 20" plate or so setup out there at 500 that they shoot from the benches. I hit it a couple times with the Swaro and got 1040 and 1042. Onx showed .59 miles which comes out to 1038 yards. Close enough. Looks like I'm not the only one shooting from this knob over there. There was a blanket already laid down, so I didn't have to get the shooting mat out. Got the R700 223 Wylde with 28" Bartlein and 80.5g Bergers at 2970fps on the harris bipod with an Armageddon rear bag. Rifle isn't even technically zeroed for these Bergers, it's zeroed for the 75g ELDMs. But since the 2 loads are very very similar with N540, they shoot close enough to the same POI out to 300, within an inch or two anyway. So I got my phone and entered the range and weather conditions into Strelok Pro. It said to come up 30 MOA from a 200y zero. The wind was at my back at around 2-3 mph so I didn't dial for wind. I got behind the S&B PMII 12-50x settled in and touched the 1st shot off. I could see the splatter on the plate, pretty much dead center. That'll do donkey, that'll do! It was pretty hard to hear the impact as it's 1/2" plate, but you could still hear it, and better yet, see it. The next 3 shots impacted about 6" low and right of center into about a 6" group from the looks of it. My 5th shot just missed the right edge, wind must've switched up and picked up a bit on me downrange. All in all, not a bad way to spend the last hour of the evening. The best thing is, I don't have to travel 20 minutes to my other shooting spot to shoot 1K anymore. Plus, it's usually shut down for the summer anyway because of the hit and dry summers. It's a fire hazard out there. Picture through the scope was on 25x taken from my phone. After about 40x the S&B gets to be pretty dark. I find myself between 25-35x most of the time. I was on 25x when I was shooting just to make sure I could spot my own impacts.

Just over a year old. Works great $200

I have been running AW magazines for a few years with my CDG in a Xylo chassis. I find myself trying to single feed rounds instead of using the magazine.
I went out of my way to 3D scan an AI AW mag and reverse engineered the geometry to print myself a single feed magazine out of PA6-GF30 Nylon. Since I don't know of any company that makes one, I might as well make one myself. I there any need for these other than my own?
thanks for viewing. - Austin

Beretta 686 Silver Pigeon 1 20 Ga - $2050 (shot 100 rounds through it) 28"

Beretta AL 391 Teknys 12 Ga Sporting - $SOLD- 30"

FN SC 1 12 Ga with green laminate stock - $1450

Prices are shipped to your dealer. Pictures soon

Known to the FB-Lie???

CRB barrel blank50 percent cert $175 shipped.

For sale:

NIB Badger Ordnance C1 CLIF. Black, standard height (not the lower one for Impacts).

$65 shipped SOLD

Discreet PayPal or Venmo.

Brand new just waiting for a project that I can't get to right now.
$1250 $1200 SOLD!

Looking for an Sig 238 HD 380. The all stainless model. Prefer to be in pretty good condition. Not interested in any other model.

Here is a picture of one.

Inletted for Lone Peak Fuzion SA. Never had an action in it. Full length arca. Forend and buttstock flush QD cups on left side. Foundation Hunt paint. $950 shipped.

View attachment IMG_0956.jpeg
View attachment IMG_0957.jpeg

Like the title says looking for a Accuracy Internatinal AICS AX Chassis. Doesnt matter color or SA or LA. Let me see what you have.

“Left-handed hunters are used to adapting, but we shouldn’t have to.”
That’s how one shooter summed it up, and they’re right. Left-handed options are few and far between, leaving most to modify or settle for gear that wasn’t made for them.

But not this time.

Deep in the backcountry, every ounce matters. Your legs burn, your shoulders ache, and that “just a few extra ounces” starts to feel like a mistake. That’s why we built a true lightweight chassis made specifically for left-handed shooters.

Now available: left-handed HNT26 for Tikka T3/T3x SA and Remington 700 LA rifles.

In squad 3 $250 payment via Zelle, cash app, Apple Pay.
Match is August 1st

Two different lots, selling each lot separately or together. Not splitting lots for now.

Lot 2210821 - count 2000 rounds NIB $1040 shipped to lower 48

Lot 2220517 - count 1700 rounds NIB $884 shipped to lower 48

Will do PayPal, Venmo or local pickup in the Houston area.

No trades, moving cross country and some things have to go.

I made the mistake of trying to size brass when exhausted and fasting for a colonoscopy and bumped my shoulder .020 rather than ,002. These are once fired Lapua 300 WSM cases. Is this unsafe to shoot? Should I just chuck these pieces of brass?

Looking for a beretta 686/687 shoot me a message of whatcha got. Thanks!

Selling my barely used custom built by Blue Mountain Precision Impact 300WM rifle. Specs are on the invoice. Unfortunately, I just don’t have anywhere close to shoot longer range so it just sits in my safe.

Note: Suppressor, Scope not included. Will include ARC scope rings (34mm) and Atlas Bipod at no cost. I also have a bunch of Federal Gold Sierra MatchKing 300WM available if interested.

For any questions DM me here or sent me a text. 8one4-2five4-7four42

3,500 shipped